Volume strength

Calculate (i) the weight of hydrogen peroxide per L of the original solution and (ii) the volume strength , i.e. the number of millilitres of oxygen at s.t.p. that can be obtained from 1 mL of the original solution. 

The volume strength of the hydrogen peroxide solution is the number of ml of oxygen at NTP which may be produced by the complete thermal decomposition of 1 ml of H202 solution. Hence, decomposition takes place as designated by the following equation ... 

Bulk (or Volume) Strength of Explosives. See Cartridge Strength in Vol 2, p C8I-R... 

Volume Strength. See under Strength of Explosives in Vol 9, S219-R... 

A ten-volume strength corresponds approximately to a 3 per cent, solution, and a twenty-volume strength to a 6 per cent. Perhydrol (p. 829) is practically a 30 per cent, solution corresponding to a one hundred-volume strength. 

The preparation parameters during the sol-gel process are of great influence on properties like pore distribution, pore volume, strength etc. of the end product. It is possible to enlarge the pores in the gelated spheres by applying a hydrothermal treatment after the gelating step [36]. All these parameters can be controlled. So this method makes it is possible to prepare tailor-made supports for catalysts in a reproducible way. 

VNP = polyvinyl nitrate (USA) 261 volume of explosiongases 367 volume strength 42 319 367 Vorgabe = burden 44 vorkesseln = springing 296 vorspalten = pre-splitting 265 W = Vzryvchatoiye veschestvo = explosive (russian)... 

Sodium phosphate solution white precipitate of zirconium phosphate, Zr(HP04)2 or Zr0(H2P04)2, even in solutions containing 10 per cent sulphuric acid by weight and also tartrates and citrates. No other element forms an insoluble phosphate under these conditions except titanium. The latter element can be kept in solution as peroxotitanic acid by the addition of sufficient hydrogen peroxide solution, preferably of 100-volume strength, before the sodium phosphate is introduced. 

Ttg (pore volume strength) = strength of binder substance. 

It is prepared industrially of 10-12 volume strength by gradually adding barium peroxid to dilute hydrofluoric acid solution, the mixture being maintained at a low temperature and constantly agitated. 

The quantity / c has the same dimension as / and can be regarded as the excluded-volume strength of a continuous chain. 

The parameter v is also named the excluded-volume strength in die subsequent presentation, diough it no longer has the dimension of volume. 

The excluded-volume variable introduced in eq 1.11 has been defined for the Edwards continuous chain with length L and excluded-volume strength V. Since all the theoretical expressions presented above for or and as arc concerned with such chains, the variable appearing in them is the one so defined. However, though identical notation was used, the z that appeared in... 

---