Vinyltoluene manufacture

Ethyltoluene is manufactured by aluminum chloride-cataly2ed alkylation similar to that used for ethylbenzene production. All three isomers are formed. A typical analysis of the reactor effluent is shown in Table 9. After the unconverted toluene and light by-products are removed, the mixture of ethyltoluene isomers and polyethyltoluenes is fractionated to recover the meta and para isomers (bp 161.3 and 162.0°C, respectively) as the overhead product, which typically contains 0.2% or less ortho isomer (bp 165.1°C). This isomer separation is difficult but essential because (9-ethyltoluene undergoes ring closure to form indan and indene in the subsequent dehydrogenation process. These compounds are even more difficult to remove from vinyltoluene, and their presence in the monomer results in inferior polymers. The o-ethyltoluene and polyethyltoluenes are recovered and recycled to the reactor for isomerization and transalkylation to produce more ethyltoluenes. Fina uses a zeoHte-catalyzed vapor-phase alkylation process to produce ethyltoluenes. 

Vinyltoluene. Viayltoluene is produced by Dow Chemical Company and is used as a resia modifier ia unsaturated polyester resias. Its manufacture is similar to that of styrene toluene is alkylated with ethylene, and the resulting ethyltoluene is dehydrogenated to yield vinyltoluene. Annual production is ia the range of 18,000—23,000 t/yr requiring 20,000—25,000 t (6-7.5 x 10 gal) of toluene. 

A large number of compounds related to styrene have been reported in the literature, Those having the vinyl group CH2=CH—attached to the aromatic ring are referred to as styienic monomers, Several of them have been used for manufacturing small-volume specialty polymers. The specialty styreme monomers that arc manufactured in commercial quantities arc vinyl toluene, /r, -methylstyrene, or-methylstyrene. and divinylbenzene. In addition, 4-fert-butylstyrene (TBS) is a specialty monomer that is superior to vinyltoluene and pnra-methylstyrene in many applications. Other styrenic monomers produced in small quantities include chlorostyrene and vinylbenzene chloride. With the exception of a-methylstyrene, which is a by-product of the phenol-acetone process, these specialty monomers are more difficult and expensive to manufacture than styrene... 

VinyUoluene. Vinyltolnene is used as a resin modifier in nnsaturated polyester resins. Its manufacture is similar to that of styrene toluene is alkylated with ethylene, and the resulting ethyltoluene is dehydrogenated to yield vinyltoluene. 

Styrene can be copolymerized with many monomers. The following monomers can be used along with styrene in the manufacture of food contact materials a-methylsty-rcne, vinyltoluene, divinylbenzene, acrylonitrile, ethyleneoxide, butadiene, fumaric and maleic acid esters of the mono functional saturated aliphatic alcohols C1-C8, acrylic acid ester and methacrylic acid, maleic acid anhydride, methylacrylamide-methylol ether, vinylmethyl ether, vinylisobutyl ether. Styrene and/or a-methylstyrene and/or vinyltoluene should be the main mixture component in every case. 

---