Vinyl chloride compounds

Poly(vinyl chloride) has a good resistance to hydrocarbons but some plasticisers, particularly the less polar ones such as dibutyl sebacate, are extracted by materials such as iso-octane. The polymer is also resistant to most aqueous solutions, including those of alkalis and dilute mineral acids. Below the second order transition temperature, poly(vinyl chloride) compounds are reasonably good electrical insulators over a wide range of frequencies but above the second order transition temperature their value as an insulator is limited to low-frequency applications. The more plasticiser present, the lower the volume resistivity. [Pg.345]

ASTM D 2124-99. Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique, Annual Book of ASTM Standards, ASTM, West Conshohocken, PA (1999), Vol. 08-01. [Pg.345]

ASTM D2124-99el Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique... [Pg.93]

Abbey 100 Poly(vinyl chloride) compound, PVC Abbey Plastic Corp. [Pg.2281]

Apex Poly (vinyl chloride) compounds PVC Teknor Apex... [Pg.2284]

Bovidur/Bovil Poly(vinyl chloride) compounds, PVC Maprac... [Pg.2288]

Recently, some halogenated materials have been found which can be reacted with synthesis gas. These are compounds which have the halogen relatively tightly bound chlorinated aromatics [289], perfluoro olefins [290] or vinylic chloride compounds [291, 292] (table 22). [Pg.57]

Lyngaae-Jorgensen, J., Capillary flow of poly(vinyl chloride) compounds. A comparison with viscometric flow data measured in continuous diear, J. MacromoL Sci Phys., B14, 213-229 (1977). [Pg.174]

Sununers JW. Lubrication mechanism in poly(vinyl chloride) compounds understanding three distinct roles of lubricants. SPE VinylTech Presentation, 2006. [Pg.90]

A typical, simple temperature-domain spectrum band b shown in Figure 7. where tbe dielectric glass transhioo b shown for a conventional plasticized poly(vinyl chloride) compound in e and a representation. In thb compound tbe ohmic conductivity (10 "-10 " S/m) b not too lar to obscure tbe dielectric loss (c (r)) peak. The exponentially... [Pg.664]

ASTM D 2I24-. METHOD FOR ANALYSIS OF COMPONENTS IN POLY (VINYL CHLORIDE) COMPOUNDS USING AN INFRARED SPECTROPHOTOMETRIC TECHNIQUE American Society for Testing Materials ASTM D 2124-... [Pg.87]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...