Vinyl acetate controlled radical

Substantial effort has been directed toward the control of vinyl acetate (VAc) radical polymerization using living radical polymerization (LRP) methods, including atom transfer radical polymerization, degenerative transfer through alkyl iodide,dialkyl tellurium, trithiocarbonate, xanthate, and cobalt acetylacetonate The focus of... 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

Method. Assume that (1) the reaction is controlled by the interaction between the radical SOMO (singly occupied MO) and the frontier orbitals of the substrates (2) the radical adds preferentially to the unsubstituted carbon of the vinyl acetate. 

Ethenyl acetate (vinyl acetate, Vac) is polymerizable only by radical species. Until recently, the polymerization of any monomer was out of control because of the unavoidable occurrence of irreversible termination reactions. In 1995, Matyjaszewski and Sawamoto and coworkers reported that the deleterious impact of these irreversible reactions could be minimized by acting on the kinetics of both the propagation and the termination reactions. Indeed, a decrease in the instantaneous concentration of radicals ([M ]) decreases much more importantly the termination rate (proportional to [M ] ) than the propagation rate (proportional to [M ]). A scheme proposed consists in converting reversibly radicals into unstable covalent species ( dormant species). The last radically polymerizable monomer to fall under this type of kinetic control was vinyl acetate. Indeed, very recently Debuigne and coworkers proposed to polymerize Vac by 2.2 -azobis-(4-methoxy-2,4-dimethyl)valeronitrile (V-70) in the presence of cobalt(II) acetyl acetonate [Co(acac)2]. Under these conditions, a linear relationship is observed between... 

The function of the chelator is to complex the ferrous ion and thus limit the concentration of free iron. Redox systems appear very versatile, permitting polymerization at ambient temperatures and the possibility of control of the rate of radical initiation versus polymerization time. This would thus permit control of heal generation and the minimization of reaction time. The use of the redox system ammonium persulfate (2 mmol) together with sodium pyrosulfite (Na S Oj 2.5 mmol) together with copper sulfate (0.002 mmol) buffered with sodium bicarbonate in I liter of water form an effective redox system for vinyl acetate emulsion polymerization. The reaction was started at 25 C and run nonisothermally to 70 C. The time to almost complete conversion was 30 min (Warson, 1976 and Edelhauser, 1975). 

The covalent bonds for dormant species include C—C (eq l),1617 C—S (eqs 2 and 9),131418 C—Se (eq 3),19 C—O (eqs 4 and 5),20 25 C—halogen (eqs 6 and 8),26 28 and C—metal (eq 7),29 all of which can reversibly and homolytically be activated into the growing radical species by physical stimuli such as heat or light or by chemical stimuli such as a metal catalyst or another radical species. Although the controllability, applicability, and reaction conditions depend on which systems are employed, a wide variety of vinyl monomers such as styrenes, methacrylates, acrylates, dienes, and vinyl acetate can be polymerized in a controlled fashion with the use of these or similar systems. Among these, nitroxide-mediated (eq 4)20 24 and metal-catalyzed27 28 systems... 

Controlled/ Living radical polymerization (CRP) of vinyl acetate (VAc) via nitroxide-mediated polymerization (NMP), organocobalt-mediated polymerization, iodine degenerative transfer polymerization (DT), reversible radical addition-fragmentation chain transfer polymerization (RAFT), and atom transfer radical polymerization (ATRP) is summarized and compared with the ATRP of VAc catalyzed by copper halide/2,2 6 ,2 -terpyridine. The new copper catalyst provides the first example of ATRP of VAc with clear mechanism and the facile synthesis of poly(vinyl acetate) and its block copolymers. 

Exploration of the template controlled free-radical oligomerization of other activated olefins began with standard monomers utilized in bulk polymer synthesis and the template 63. Vinyl acetate and acrylonitrile led only to uncontrolled polymerization, while vinylene carbonate did not react under the standard experimental conditions. More exotic monomers, such as vinyl trifluoroacetate and rert-butyl acrylate, were also unsuccessful. Only methyl acrylate polymerization was arrested by template 64 to provide the macrocyclized product 96 in modest yield as a mixture of five diastereomers (Scheme 8-25). Subsequent studies with the more effective thiophenyl-bearing template 63 at lower temperatures improved this yield to 35%. The diastereomer distribution was reminiscent of the methyl methacrylate-derived product, although no stereochemical assignments were made in this case either. 

Free-radical polymerization reactions have recently been studied for different monomers, for example mono and disubstituted vinyl monomers and dienes. The bulk polymerization of vinyl monomers (e.g. vinyl acetate, styrene, methyl methacrylate, and acrylonitrile) has been investigated by Amorim et al. [10]. The reactions were conducted in the presence of catalytic amounts of AIBN (or benzoyl peroxide). It was found that the rate of polymerization depends on the structure of the monomers and the power and time of microwave irradiation. In a typical experiment 10.0 mL of each monomer and 50 mg AIBN was irradiated in a domestic microwave oven for 1 to 20 min to afford the polymers polystyrene, poly(vinyl acetate), and poly(methyl methacrylate) with weight-average molecular weights 48 400, 150 200, 176700 g mol, respectively (Scheme 14.1). The experiments were performed without temperature control. 

Shaver and coworkers [319] investigated the mechanism of bis(imino)pyridine ligand framework for transition metal systems-mediated polymerization of vinyl acetate. Initiation using azobisisobu-tyronitrile at 120°C results in excellent control over poly(vinyl acetate) molecular weights and polymer dispersities. The reaction yields vanadium-terminated polymer chains which can be readily converted to both proton-terminated poly(vinyl acetate) or poly(vinyl alcohol). Irreversible halogen transfer from the parent complex to a radical derived from azobisisobutyronitrile generates the active species. 

---