Urethane amine

Wet chemical methods determining titratable amine ate reported for products entering urethane (amine number as meq/g) or epoxy (AHEW = amine hydrogen equivalent weight) trade appHcations. For secondary amines /V-nitrosamine contaminants are reportable down to ppb using Thermoelectron Corporation thermal energy analy2er techniques. 

The final topic to be covered in this chapter will be the production of poly (urethane-amine) s from C02 and aziridine derivatives (Equation 8.3). 

There is wide variety of vulcanisation agents and methods available for crosslinking rubber materials including peroxide, radiation, urethane, amine-boranes, and sulfur compounds [20]. Because of its superior mechanical and elastic properties, ease in use, and low cost, sulfur vulcanisation is the most widely used. Although vulcanisation with sulfur alone is not practical compared to the accelerated sulfur vulcanisation in terms of the slower cure rate and inferior physical properties of the end products, many fundamental aspects can be learned from such a simply formulated vulcanisation system. The use of sulfur alone to cure NR is typically inefficient, i.e., requiring 45-55 sulfur atoms per crosslink [21], and tends to produce a large portion of intramolecular (cyclic) crosslinks. However, such ineffective crosslink structures are of interest in the understanding of complex nature of vulcanisation reactions. 

Blocked isocyanate prepolymers have been mixed with epoxy resins and cured with amines.18,19 These blocked prepolymers will initially react with the amines to form amine-terminated prepolymers that crosslink the epoxy resin. Urethane amines are also offered commercially for use with epoxy resins to develop hybrid adhesive systems.20... 

More recent efforts have focused on developments that create true hybrids. For example, blocked isocyanate prepolymers have been mixed with epoxy resins and cured with amines [68-70]. These blocked prepolymers will react initially with the amines to form amine-terminated prepolymers that cross-link the epoxy resin. Several blocked isocyanates are commercially available. The DESMOCAP (Bayer) llA and 12A products are isocyanates (believed to be blocked with nonylphenol) used as flexibilizing agents for epoxy resins. ANCAREZ (trademark. Pacific Anchor, Inc.) 2150 is a blocked isocyanate epoxy blend used as an adhesion promoter for vinyl plastisols. A one-package, heat-cured hybrid adhesive was reported consisting of isophorone diisocyanate, epoxy resin, and a dispersed solid curative based on the salt of ethylenediamine and bisphenol A [71]. Urethane amines are offered commercially that can be used with epoxy resins to develop hybrid adhesive systems [72]. 

HA lhata, O., Kayaki, Y., and Ikariya, T., Aliphatic poly(urethane-amine)s synthesized by copolymerization of aziridines and supercritical caibon dioxide. Macromolecules, 38, 6429, 2005. 

Starting Material Hydrazide Azide Isocyanate Urethan Amine, etc. 

---