Uranium oxide reaction with

The uranium reactor was built on a squash court of the university (and it was here that the guards donned discarded raccoon coats to protect themselves from the cold). Dubbed CP-1 (Chicago pile number 1), it was called an atomic pile because it was just that The reactor consisted of a pile of containers of uranium oxide interspersed with graphite bricks. There was a neutron source at the bottom to initiate the reaction, and neutron-absorbing cadmium rods could be inserted for control. Fermi s group demonstrated the feasibility of a uranium chain reaction by the end of 1942. 

These are made of boron carbide ia a matrix of aluminum oxide clad with Zircaloy. As the uranium is depleted, ie, burned up, the boron is also burned up to maintain the chain reaction. This is another intrinsic control feature. The chemical shim and burnable poison controls reduce the number of control rods needed and provide more uniform power distributions. 

The corrosion behavior of plutonium metal has been summarized (60,61). a-Plutonium oxidizes very slowly in dry air, typically <10 mm/yr. The rate is accelerated by water vapor. Thus, a bright metal surface tarnishes rapidly in normal environments and a powdery surface soon forms. Eventually green PUO2 [12059-95-9] covers the surface. Plutonium is similar to uranium with respect to corrosion characteristics. The stabilization of 5-Pu confers substantial corrosion resistance to Pu in the same way that stabilization of y-U yields a more corrosion-resistant metal. The reaction of Pu metal with Hquid water produces both oxides and oxide-hydrides (62). The reaction with water vapor above 100°C also produces oxides and hydride (63). 

Sihca is reduced to siUcon at 1300—1400°C by hydrogen, carbon, and a variety of metallic elements. Gaseous siUcon monoxide is also formed. At pressures of >40 MPa (400 atm), in the presence of aluminum and aluminum haUdes, siUca can be converted to silane in high yields by reaction with hydrogen (15). SiUcon itself is not hydrogenated under these conditions. The formation of siUcon by reduction of siUca with carbon is important in the technical preparation of the element and its alloys and in the preparation of siUcon carbide in the electric furnace. Reduction with lithium and sodium occurs at 200—250°C, with the formation of metal oxide and siUcate. At 800—900°C, siUca is reduced by calcium, magnesium, and aluminum. Other metals reported to reduce siUca to the element include manganese, iron, niobium, uranium, lanthanum, cerium, and neodymium (16). 

CP-1 was assembled in an approximately spherical shape with the purest graphite in the center. About 6 tons of luanium metal fuel was used, in addition to approximately 40.5 tons of uranium oxide fuel. The lowest point of the reactor rested on the floor and the periphery was supported on a wooden structure. The whole pile was surrounded by a tent of mbberized balloon fabric so that neutron absorbing air could be evacuated. About 75 layers of 10.48-cm (4.125-in.) graphite bricks would have been required to complete the 790-cm diameter sphere. However, criticality was achieved at layer 56 without the need to evacuate the air, and assembly was discontinued at layer 57. The core then had an ellipsoidal cross section, with a polar radius of 209 cm and an equatorial radius of309 cm [20]. CP-1 was operated at low power (0.5 W) for several days. Fortuitously, it was found that the nuclear chain reaction could be controlled with cadmium strips which were inserted into the reactor to absorb neutrons and hence reduce the value of k to considerably less than 1. The pile was then disassembled and rebuilt at what is now the site of Argonne National Laboratory, U.S.A, with a concrete biological shield. Designated CP-2, the pile eventually reached a power level of 100 kW [22]. 

Strangely enough, a combination similar to the ammonia catalyst, iron oxide plus alumina, yielded particularly good results (32). Together with Ch. Beck, the author found that other combinations such as iron oxide with chromium oxide, zinc oxide with chromium oxide, lead oxide with uranium oxide, copper oxide with zirconium oxide, manganese oxide with chromium oxide, and similar multicomponent systems were quite effective catalysts for the same reaction (33). 

Uranium is best known as a fuel for nuclear power plants. To prepare this fuel, uranium ores are processed to extract and enrich the uranium. The process begins by mining uranium-rich ores and then crushing the rock. The ore is mixed with water and thickened to form a slurry. The slurry is treated with sulfuric acid and the product reacted with amines in a series of reactions to give ammonium diuranate, (NH4)2U20 . Ammonium diuranate is heated to yield an enriched uranium oxide solid known as yellow cake. Yellow cake contains from 70—90% U3Og in the form of a mixture of U02 and U03. The yellow cake is then shipped to a conversion plant where it can be enriched. 

Calcium serves as a reductant for such reactive metals as zirconium, thorium, vanadium, and uranium. In zirconium reduction, zirconium fluoride is reacted with culcium metal. The high heat of the reaction melts the zirconium. The zirconium ingot resulting is remelted undet vacuum for purilicatinn. Thorium and uranium oxides are reduced with an excess of calcium in reactors or trays under an atmosphere of argon. The resulting tnetals are leached with acetic acid tu remove the lime. 

The procedure of Goode et al. was developed to provide a highly precise determination of uranium and it succeeded admirably, since a precision of 0.004% was achieved. The accuracy was reportedly better than 0.01%, but the method does require an accurately known solution of Ti(III). The Malinowski method offers another alternative. The U(IV) is oxidized by addition of an amount of solid primary standard K2Cr207 that is in excess by a few milligrams. Ferric chloride is added to the solution and the excess dichromate is determined by reaction with electrogenerated Fe(II). Excellent results were found for the analysis of U308 obtained from NBS. A precision of 3 parts in 105 was reported and an error of 7 parts in 104. 

A single oxo bridge may subtend an angle between 140° and 180°, this angle being determined by steric or electronic factors (Table 3).95 103 Almost all these examples refer to the solid state, but there are also several homo- and hetero-nuclear M—O—M and M—O—M—O—M species known in solution. Often these are intermediates in, or products of, electron transfer reactions with oxide-bridging inner-sphere mechanisms. Examples include V—O—V in V(aq)2+ reduction of VO(aq)2+, and Act—O—Cr in Cr(aq)2+ reduction of UOj+ or PuOj+ a useful and extensive list of such species has been compiled. Tlie most recent examples are another V—O—V unit, this time from VO(aq)2+ and VOJ,105 and an all-actinide species containing neptunium(VI) and uranium-(VI).106 An example of a trinuclear anion of this type, with the metal in two oxidation states, is provided by (31).107... 

---