Twin screw extrusion intermeshing

A. C. Y. Wong, F. Zhu, and T. Liu, Qualitative Study on Intermeshing Co-rotating Twin Screw Extrusion Using Novel Visual Technique, Plast. Rubber Comps. Proc. Appl., 26, 271 (1997). 

L. Zhu and X. Geng, Visual Research of Melting Mechanism of Polymer Pellets in Intermeshing Co-rotating Twin-screw Extrusion, SPE ANTEC Tech. Papers, 55, 3684 (1997). 

T. Sakai and N. Hashimoto, Application of Novel Counter-rotating Intermeshed Twin Extruder for Degassing Operation, SPE ANTEC Tech. Papers, 32, 860-863 (1986) also T. Sakai, N. Hashimoto, and N. Kobayashi, Experimental Comparison between Counterrotation and Co-rotation on the Twin Screw Extrusion Performance, SPE ANTEC Tech. Papers, 33, 146-151 (1987). 

To run a simulation of an intermeshing co-rotating twin-screw extrusion process, the working conditions such as throughput, screw speed and optionally die pressure, and material properties have to be specified. Table 6.6 gives material parameters for... 

We have reviewed mixing mechanism, morphology development, and intermeshing co-rotating twin screw extrusion technology in the previous sections. For a given... 

Figure 4.8 Twin-screw extrusion (a) simulation of the pressure drop in the system and (b) simulation of particle tracking in the intermeshing chamber of the extruder [16].

Twin Screw Extrusion Counterotation/Intermeshed Screws 150 rpm, 100-180°C in Sooking and Pressure-die Barrel Zones, Slit Die Orifices... 

Most of the compounds were extrusion compounded in a conical, partially intermeshing, counter rotating twin screw extruder (Haake Reomix TW-lOO). The extruder speed was set at 50 rpm and the barrel temperature profile was set to produce a melt temperature of 260°C at the die. Samples were injection molded in a 31.8 MT Battenfeld press with a 59 cc shot size. Where noted, samples were compounded in a 60 cc Brabender internal mixer and compression molded. 

The industrial use of twin-screw extruders for this purpose revolves extensively, but not exclusively, around intermeshing co-rotating variants. Closely in-termeshing counter-rotating designs are widely used for profile extrusion of UPVC dry-blends since they permit close temperature control and exhibit a high conveying efficiency due to the positive displacement of material where the screws intermesh [150]. 

T. W. McCullough and B. T. Hilton, The Extrusion Performance of Co-rotating, Intermeshing Twin Screw Extruder Screw Elements-An Experimental Investigation, SPE ANTEC Tech. Papers, 39, 3372-3379 (1993). 

---