Total petroleum hydrocarbons gravimetric methods

There are many analytical techniques available that measure total petroleum hydrocarbon concentrations in the environment, but no single method is satisfactory for measurement of the entire range of petroleum-derived hydrocarbons. In addition, and because the techniques vary in the manner in which hydrocarbons are extracted and detected, each method may be applicable to the measurement of different subsets of the petroleum-derived hydrocarbons present in a sample. The four most commonly used total petroleum hydrocarbon analytical methods include (1) gas chromatography (GC), (2) infrared spectrometry (IR), (3) gravimetric analysis, and (4) immunoassay (Table 7.1) (Miller, 2000, and references cited therein). 

Methods based on gravimetric analysis (Table 7.2) are also simple and rapid, but they suffer from the same limitations as those of infrared spectrometric methods (Table 7.2). Gravimetric-based methods may be useful for oily sludge and wastewaters, which will present analytical difficulties for other, more sensitive methods. Immunoassay methods for the measurement of total petroleum hydrocarbon are also popular for field testing because they offer a simple, quick technique for in situ quantification of the total petroleum hydrocarbons. 

In general, a TPH method generates a single concentration based upon the total amount of petroleum compounds measured by a specific technique. The most frequently used methods are based on gas chromatography (GC), infrared (IR) or gravimetric analytical techniques. Of these, GC techniques are the preferred choice as they not only detect a broad range of hydrocarbons but also provide... 

---