Toluenesulfonly chloride

When It IS necessary to prepare secondary alkyl halides with assurance that no trace of rearrangement accompanies their formation the corresponding alcohol is first converted to its p toluenesulfonate ester and this ester is then allowed to react with sodium chloride bromide or iodide as described m Section 8 14... 

Section 8 14 Nucleophilic substitution can occur with leaving groups other than halide Alkyl p toluenesulfonates (tosylates) which are prepared from alcohols by reaction with p toulenesulfonyl chloride are often used... 

If the temperature is not kept below 25°C dunng the reaction of primary alcohols with p toluenesulfonyl chloride in pyndine it is sometimes observed that the isolated product is not the desired alkyl p toluenesulfonate but is instead the corresponding alkyl chlonde Suggest a mech anistic explanation for this observation... 

Conversion to p toluenesulfonate es ters (Section 8 14) Alcohols react with p toluenesulfonyl chloride to give p toluenesulfonate esters Sulfo nate esters are reactive substrates for nucleophilic substitution and elimma tion reactions The p toluenesulfo nate group is often abbreviated —OTs... 

Both reactants m the Williamson ether synthesis usually originate m alcohol pre cursors Sodium and potassium alkoxides are prepared by reaction of an alcohol with the appropriate metal and alkyl halides are most commonly made from alcohols by reaction with a hydrogen halide (Section 4 7) thionyl chloride (Section 4 13) or phosphorus tri bromide (Section 4 13) Alternatively alkyl p toluenesulfonates may be used m place of alkyl halides alkyl p toluenesulfonates are also prepared from alcohols as their imme diate precursors (Section 8 14)... 

H2SnClg 6H20, CISO H + CH OH, CH COOH, as well as ben2ene-, naphthalene-, and -toluenesulfonic acids (44). Zinc chloride is probably the most frequentiy used catalyst. Its activity is sometimes increased by fusion with a small amount of aluminum chloride. In other instances, however, sufficient catalytic effect is obtained with a mineral acid alone. 

Refluxing linoleic acid and a primary or secondary alkyl amine with -toluenesulfonic acid in toluene for 8—18 h also yields the substituted amides (32—34). The reaction of methyl esters with primary or secondary amines to make substituted amides is catalyzed with sodium methoxide. Reactions are rapid at 30°C under anhydrous conditions (35). Acid chlorides can also be used. Ai,A/-dibutyloleamide [5831-80-17 has been prepared from oleoyl chloride and dibutyl amine (36). 

All lation. In alkylation, the dialkyl sulfates react much faster than do the alkyl haHdes, because the monoalkyl sulfate anion (ROSO ) is more effective as a leaving group than a haHde ion. The high rate is most apparent with small primary alkyl groups, eg, methyl and ethyl. Some leaving groups, such as the fluorinated sulfonate anion, eg, the triflate anion, CF SO, react even faster in ester form (4). Against phenoxide anion, the reaction rate is methyl triflate [333-27-7] dimethyl sulfate methyl toluenesulfonate [23373-38-8] (5). Dialkyl sulfates, as compared to alkyl chlorides, lack chloride ions in their products chloride corrodes and requires the use of a gas instead of a Hquid. The lower sulfates are much less expensive than lower bromides or iodides, and they also alkylate quickly. 

In laboratory preparations, sulfuric acid and hydrochloric acid have classically been used as esterification catalysts. However, formation of alkyl chlorides or dehydration, isomerization, or polymerization side reactions may result. Sulfonic acids, such as benzenesulfonic acid, toluenesulfonic acid, or methanesulfonic acid, are widely used in plant operations because of their less corrosive nature. Phosphoric acid is sometimes employed, but it leads to rather slow reactions. Soluble or supported metal salts minimize side reactions but usually require higher temperatures than strong acids. 

An aiyl methane- or toluenesulfonate ester is stable to reduction with lithium aluminum hydride, to the acidic conditions used for nitration of an aromatic ring (HNO3/HOAC), and to the high temperatures (200-250°) of an Ullman reaction. Aiyl sulfonate esters, formed by reaction of a phenol with a sulfonyl chloride in pyridine or aqueous sodium hydroxide, are cleaved by warming in aqueous sodium hydroxide. ... 

From benzylmagnesium chloride and ethyl />-toluenesulfon-ate. Gilman and Beaber, J. Am. Chem. Soc. 47, 518 (1925). 

Toluenesulfonic anhydride has been prepared from the acid by the use of thionyl chloride and phosphorus pentoxide. It has also been obtained by heating oxime -toluenesulfonates, by reaction of -toluenesulfonic acid with di- -tolylcarbodiimide, and by the interaction of methoxyacetylene and -toluenesul-fonic acid. ... 

In a 2-1. flask fitted with a total-reflux, variable-take-off distillation head is placed a solution of 53 g. (0.472 mole) of dihydroresorcinol (Note 1), 2.3 g. of -toluenesulfonic acid monohydrate and 250 ml. of absolute ethanol in 900 ml. of benzene. The mixture is heated to boiling and the azeotrope composed of benzene, alcohol, and water is removed at the rate of 100 ml. per hour. When the temperature of the distilling vapor reaches 78° (Note 2), the distillation is stopped and the residual solution is washed with four 100-ml. portions of 10% aqueous sodium hydroxide which have been saturated with sodium chloride. The resulting organic solution is washed with successive 50-ml. portions of water until the aqueous washings are neutral and then concentrated under reduced pressure. The residual liquid is distilled under reduced pressure. The yield of 3-ethoxy-2-cyclohexenone (Note 3), b.p. 66-68.5°/0.4 mm. or 115-121°/11 mm., Mq 1.5015, is 46.6-49.9 g. (70-75%). 

Lithium aluminum hydride (LiAlH4) is the most powerful of the hydride reagents. It reduces acid chlorides, esters, lactones, acids, anhydrides, aldehydes, ketones and epoxides to alcohols amides, nitriles, imines and oximes to amines primary and secondary alkyl halides and toluenesulfonates to... 

Ji-Methoxy-ll, 11-ethylenedioxy-lS-methylestra-1,3,5(lO)-tnene. A solution of (+)3-methoxy-18-methylestra-l,3,5(10)-trien-17-one (5 g) dissolved in ethylene glycol (5 ml) and ethyl orthoformate (10 ml) containing />-toluenesulfonic acid (0.3 g) is heated under reflux for 2 hr in a nitrogen atmosphere. The resulting solution is diluted with methylene chloride and washed with dilute sodium bicarbonate and water. The organic phase is dried over sodium sulfate and evaporated to dryness in the presence of a trace of pyridine. Trituration of the residue with petroleum ether yields 4.7 g (82 %) of the pure ketal. 

Because halides are poorer leaving groups than p-toluenesulfonate, alkyl p-toluene-sulfonates can be converted to alkyl halides by Sn2 reactions involving chloride, bromide, or iodide as the nucleophile. 

The reaction of alcohols with acyl chlorides is analogous to their reaction with p-toluenesulfonyl chloride described earlier (Section 8.14 and Table 15.2). In those reactions, a p-toluenesulfonate ester was formed by displacement of chloride from the sulfonyl group by the oxygen of the alcohol. Carboxylic esters arise by displacement of chloride from a carbonyl group by the alcohol oxygen. 

If Y is to be a valid measure of solvent ionizing power, presumably the defining reaction should proceed via the Lim (pure SnI) process. This was the basis for the original choice of r-butyl chloride. It is now believed that /-butyl chloride sol-volyzes with some solvent participation, and modern versions of Y are based on other compounds, of which 2-adamantyl tosylate (p-toluenesulfonate, OTs), 6, is the most favored." ... 

A mixture of 200 grams of 2-benzoyloxyethanol in 2 liters of pyridine at -5°C is treated with 275 grams of p-toluenesulfonyl chloride and the resulting mixture is stirred at O C for 2 hours. Water is added slowly at O " to 5°C. Extracting with chloroform, washing the extract with dilute hydrochloric acid, water and potassium bicarbonate, and evaporating the solvent leaves benzyloxyethyl p-toluenesulfonate. 

---