Tests ionic

The beneficial effects of several ionic liquids as mobile phase additives in HPLC using an electrochemical detection for the determination of heterocyclic aromatic amines have been evaluated (2). The tested ionic liquids were l-butyl-3-methyhmidazolium tetrafluoroborate, l-hexyl-3-methylimidazolium tetrafluoroborate, and... 

In order to detect these elements in organic compounds, it is necessary to convert them into ionlsable inorganie substanees so that the ionic tests of inoiganio qualitative analysis may be applied. This conversion may be accomplished by several methods, but the best procedure is to fuse the organic compound with metallio sodium (Lassalgne s test). In this way sodium cyanide, sodium sulphide and sodium halides are formed, which are readily identified. Thus ... 

The method is apphcable for unflocculated pulps or those in which the ionic characteristics of the solution produce a flocculent structure. If polymeric flocculants are used, the floccule size will be highly dependent on the feed concentration, and an approach based on the Kynch theoiy is preferred. In this method, the test is carried out at the expec ted feed solids concentration and is continued until underflow concentration is achieved in the cyhnder. To determine the unit area, Talmage and Fitch (op. cit.) proposed an equation derived from a relationship equivalent to that shown in Eq. (18-45) ... 

The system of anionic surfactants is another example of organic compounds mixtures. The procedure of their determination is proposed using coordinate pH in two-dimensional spectra of ionic associates anionic surfactants with rhodamine 6G. This procedure was tested on the analysis of surfactant waters and domestic detergents. 

Eor ionic liquids that do not mix completely with water (and which display sufficient hydrolysis stability), there is an easy test for acidic impurities. The ionic liquid is added to water and a pEf test of the aqueous phase is carried out. If the aqueous phase is acidic, the ionic liquid should be washed with water to the point where the washing water becomes neutral. Eor ionic liquids that mix completely with water we recommend a standardized, highly proton-sensitive test reaction to check for protic impurities. 

The solubility of water vapor in ionic liquids is of interest because ionic liquids are extremely hygroscopic. In addition, the solubility of water vapor in ILs is an excellent test of the strength of molecular interactions in these fluids. By using the gravi-... 

At first glance the hydrogen bond basicity (3 is controlled solely by the anions, with basicity decreasing in the order Cl > [RS03] >[BF4] > [PF ] > [N03] > [SCN] . However, while the general trend is clear, this is not the order that one would have expected, and the cations are obviously playing a role. Again, this may be a consequence of competition for the basic site (anion) between the test solute and the acidic site (cation) of the ionic liquid. It is unfortunate that no study to date has used a common anion across all possible cations. 

Although the reactants have only limited solubility in the catalyst phase, the rates of hydrogenation in [BMIM][SbFg] are almost five times faster than for the comparable reaction in acetone. All ionic catalyst solutions tested could be reused repeatedly. The loss of rhodium through leaching into the organic phase lay below the detection limit of 0.02 %. These results are of general importance for the field of... 

Iborra and co-workers (Entry 8) examined the transesterification of N-acetyl-i-tyrosine ethyl ester in different ionic liquids and compared their stabilizing effect relative to that found with 1-propanol as solvent [36]. Despite the fact that the enzyme activity in the ionic liquids tested reached only 10 to 50 % of the value in 1-propanol, the increased stability resulted in higher final product concentrations. Fixed water contents were used in both studies. 

Composition of the liquid environment The ionic composition, arising from dissolved salts and gases, has a considerable influence on the performance of inhibitors. In near-neutral aqueous systems the presence of certain ions tends to oppose the action of inhibitors. Chlorides and sulphates are the most common examples of these aggressive ions, but other ions, e.g. halides, sulphides, nitrates, etc. exert similar effects. The concentration of inhibitor required for protection will depend on the concentrations of these aggressive ions. Laboratory tests " have given some quantitative relationships... 

---