Tertiary alcohol system

In 2009, Tu et al. developed a novel iron-catalyzed C(sp )-C(sp ) bond-forming reaction between alcohols and olefins or tertiary alcohols through direct C(sp )-H functionalization. A series of primary alcohols were treated with alkenes or tertiary alcohols as their precursors, using the general catalysis system FeCls (0.15 equiv)/ 1,2-dichloroethane (DCE) (Scheme 36) [46]. 

Hj concentration as a function of time for various alcohols as electron donor. In the presence of primary and secondary alcohols the rates of Hj generation are equal although the induction periods at the start of illumination are different. In the presence of a tertiary alcohol the rate of formation is substantially lower. As mentioned in section 4.2 alcohols are not strongly adsorbed at the TiO particles and therefore do not react with the positive holes before they are trapped. The main scavenger in this system is the platinum deposit which scavenges electrons and catalyses the reduction of hydrogen ions 2 e" -I- 2 —> H2- A surprising observation was that the H2... 

Trifluoromethanesulfonates of alkyl and allylic alcohols can be prepared by reaction with trifluoromethanesulfonic anhydride in halogenated solvents in the presence of pyridine.3 Since the preparation of sulfonate esters does not disturb the C—O bond, problems of rearrangement or racemization do not arise in the ester formation step. However, sensitive sulfonate esters, such as allylic systems, may be subject to reversible ionization reactions, so appropriate precautions must be taken to ensure structural and stereochemical integrity. Tertiary alkyl sulfonates are neither as easily prepared nor as stable as those from primary and secondary alcohols. Under the standard preparative conditions, tertiary alcohols are likely to be converted to the corresponding alkene. 

Due to the potential problems associated with f3-H elimination, the first examples that were reported involved the intramolecular formation of G-O bonds between tertiary alcohols and aryl bromides using Pd(OAc)2 with 2,2 -bis(di-/>-tolylphosphino)-l,l -binapthyl (tol-BINAP) or bis(diphenylphosphino)ferrocene (dppf) as the ligands (Equation (12)).91 Although the coupling with primary and secondary alcohols was troublesome with this system, the more recent introduction of ligands 23-28 (Figure 3) has ameliorated many of these difficulties (Equation (13)).92... 

Method D The alcohol (11.5 mol) is added to TBA-Br (0.32 g, 1 mmol) in aqueous NaOH (50%, 5 ml) and the mixture is stirred for 5 min. A suspension of the halonitro-benzamide (0.1 mol) in PhMe (150 ml) is then added and the two-phase system is stirred at 40 C until the reaction is shown to be complete by TLC analysis. The mixture is cooled to room temperature and the organic phase is separated and evaporated. H20 (300 ml) is added and the ether comes out of solution. (Method D fails with phenols and with secondary and tertiary alcohols.)... 

Alcohols, their corresponding olefins and alkyl cations are in equilibrium, with the alcohol generally predominating over the olefin (Purlee et al., 1955 Taft and Riesz, 1955 Boyd et al., 1960). The alkyl cation concentration is extremely low and this species never exists as more than a transient intermediate whose relation to the solvent is little known. In 5% H2SO4 the ratio of alcohol to olefin is about 1200 to 1 at 50° for the isobutylene-tertiary butyl alcohol system (Taft and Riesz, 1955). As the temperature increases the ratio of alcohol to olefin at equilibrium decreases (Boyd et al., 1960). This can be illustrated by examining the position of equilibrium in equation (8). Values of Kp, [alcohol (1)]/ [olefin (g)], were shown to vary from 5 54 at 50° to 1-34 at 70°. The equilibrium constant [alcohol (l)]/[olefin (1)] can be calculated from... 

Thus, a wide variety of vinyl ethers could be synthesized using this method (Scheme 10.5). This catalyhc vinylation system was found to be applicable to the synthesis of vinyl ethers from secondary and tertiary alcohols. No deuterium was introduced into the resulhng phenyl vinyl ether when phenol-d was allowed to... 

Amitriptyline Amitriptyline, 5-(3-dimethylaminopropyliden)-10,ll-dihydrodibenzocy-cloheptene (7.1.4), differs from imipramine in that the nitrogen atom in the central part of the tricyclic system is replaced by a carbon, which is bound to a side chain by a double bond. Amitriptyline (7.1.4) is synthesized by interaction of 10,ll-dihydro-A,iV-dimethyl-57f-dibenzo[a,d]cyclohepten-5-one with 3-dimethylaminopropyhnagnesium bromide and the subsequent dehydration of the resulting tertiary alcohol (7.1.3) using hydrochloric acid [ 11]. 

P.W. Collins, R.L. Shone, A.F. Gasieski, W.E. Perkins, R.G. Blanch , Stabilization of a prostaglandin tertiary allylic alcohol system by fluorine Synthesis, acid stability studies and pharmacology of a 16-fluoromethyl analog of SC-46275, Bioorg. Med. Chem. Lett. 2 (1992) 1761-1766. 

Dosa and Fu reported the first catalytic enantioselective phenyl transfer reaction to ketones (equation 25)100. In the presence of 1.5 equivalents of MeOH, the chiral tertiary alcohol was produced in good yield and with high enantioselectivity. Walsh and workers recently reported the Ti(OE -i Vchiral dihydroxybis(sulfonamide) catalyst 34 system, whereby enones have been converted to enantioenriched allyl alcohols101. 

Krause and Belting studied a tandem catalyzed reaction, in this case intramolecular cyclization and intermolecular hydroalkoxylation. The substrates were various homo-propargylic alcohols in the presence of non-tertiary alcohols and a dual catalyst system consisting of Br( >nsted acids and a gold precatalyst (Equation 8.43). 

The chroman ring system is stable to organometallic reagents, for example in the formation of the tertiary alcohol (690) in high yield (63HCA650), and to the usual interconversion of carboxylic acid, acyl chloride, carboxamide and nitrile. 

Doyle and co-workers have employed Rh2(pfb)4 as a highly selective catalyst for the room temperature synthesis of silyl ethers from alcohols and triethylsilane.159 The selectivity of the catalyst is demonstrated by reactions of olefinic alcohols, in which hydrosilylation is not competitive with silane alcoholysis when equimolar amounts of silane and alcohol are employed. High yields (>85%) of triethylsilyl ethers are obtained from reactions of alcohols such as benzyl alcohol, 1-octanol, 3-buten-l-ol, cholesterol, and phenol. Tertiary alcohols are not active in this system. 

Two empirical increment systems (Table 4.22) derived from experimental data as collected in Table 4.23 permit prediction of alkanol carbon-13 shifts. One is related to the shift value B of the hydrocarbon R —H and involves, as usual, addition of the increments Z, = <5,(r oh) — r)(- R > according to eq. (4.8 a) [268]. The other employs a linear equation (4.8 b), correlating the shifts of an alkanol R — OH and the corresponding methyl-alkane R —CH3 by a constant bk and a slope ak, which is 0.7-0.8 for a and about 1 for ji and y positions [269]. Specific parameter sets characterize primary, secondary, and tertiary alcohols (Table 4.22). The magnitudes of Z) increments in eq. (4.8 a) decrease successively from primary to tertiary alcohols (Table 4.22), obviously as a result of reduced populations of conformers with yliauche interactions in the conformational equilibrium when the degree of alkylation increases. 

Burgess reagent, (methoxycarbonylsulfamoyl)triethylammonium hydroxide, usually used for the dehydration of secondary or tertiary alcohols, was successfully employed in the formation of cyclic sulfamidates from the corresponding epoxides. It was further shown that the same reaction with aromatic epoxides resulted in the formation of seven-membered ring systems, for example, 57 (Figure 23) <2003SL1247>. 

---