Telechelic

E. J. Goethals, ed., Telechelic Polymers Sjsthesis and Applications, CRC Press, Boca Raton, Fla., 1989. 

Telechelic Ionomers. Low molecular weight polymers terminated by acid groups have been treated with metal bases to give ionomers in which the cations can be considered as connecting links in the backbones (67—71). The viscoelastic behavior of concentrated solutions has been linked to the neutralizing cation. 

Unfortunately, because self-condensation of silanols on the same silicone can occur almost spontaneously, the reaction of disdanol or trisilanol compounds with telechelic sdanol polymers to form a three-dimensional network is not feasible. Instead, the telechelic polymers react with cross-linkers containing reactive groups such as alkoxysdanes, acyloxysdanes, silicon hydrides, or methylethyloximesilanes, as in the reactions in equations 18—21 (155). 

The quantum yield of polymerization is 6.72 and for photoinitiation < / = 2.85 x 10 . The polystyrene produced with this initiator shows photosensitivity when irradiated with UV light (A = 280 nm). This polymer, which carries two photosensitive end groups of - SC(S) N(CH3)2, behaves as a telechelic polymer and it is useful for production of ABA block copolymer. 

Ameduri, B. and Boutevin, B. Synthesis and Properties of Fluorinated Telechelic Monodis-persed Compounds. Vol. 102, pp. 133-170. 

Primary radical termination is also of demonstrable significance when very high rates of initiation or very low monomer concentrations are employed. It should be noted that these conditions pertain in all polymerizations at high conversion and in starved feed processes. Some syntheses of telechelics are based on this process (Section 7.5.1). Reversible primary radical termination by combination with a persistent radical is the desired pathway in many forms of living radical polymerization (Section 9.3). 

Group transfer processes are of particular importance in the production of telechelic or di-end functional polymers. 

Transfer constants of the methacrylate macromonomers in MMA polymerization do not depend on the ester group but are slightly higher for MAA trimer. Compounds 72 and 73 are derived from the MMA trimer (67) by selective hydrolysis or hydrolysis and reesterification respectively. They offer a route to telechelic polymers. 

Heitz, W. in Telechelic Polymers Synthesis and Applications, Goethais, E.J., Ed. CRC Press Boca Raton, Florida, 1989 p 61. 

End-functional polymers, including telechelic and other di-end functional polymers, can be produced by conventional radical polymerization with the aid of functional initiators (Section 7,5.1), chain transfer agents (Section 7.5.2), monomers (Section 7.5.4) or inhibitors (Section 7.5.5). Recent advances in our understanding of radical polymerization offer greater control of these reactions and hence of the polymer functionality. Reviews on the synthesis of end-functional polymers include those by Colombani,188 Tezuka,1 9 Ebdon,190 Boutevin,191 Heitz,180 Nguyen and Marechal,192 Brosse et al.rm and French.194... 

A telechelic polymer is a di-end-functional polymer where both ends possess the same functionality. 

The synthesis of telechelics by what Tobo]sky,9> termed dead-end polymerization is described in several review s.191,191 In dead-end polymerization very high initiator concentrations and (usually) high reaction temperatures are used. Conversion ceases before complete utilization of the monomer because of depletion of the initiator. Target molecular weights are low (1000-5000) and termination may be mainly by primary radical termination.. The first use of this methodology to prepare lelechelic polystyrene was reported by Guth and Heitz.177... 

When a polymer is prepared by radical polymerization, the initiator derived chain-end functionality will depend on the relative significance and specificity of the various chain end forming reactions. Tlius, for the formation of telechelic polymers ... 

These conditions severely limit the range of initiators and monomers that can be used and require that attention to reaction conditions is of paramount importance. The relatively low incidence of side reactions associated with the use of azo-compounds (Section 3.3.1) has led to these initiators being favored for this application. Functional azo compounds used in telechelic syntheses include 9,19c> 198 10l99,2ml and ll20l,2<12. The acylazidc end groups formed with initiator 11 may be thermally transformed to isocyanate ends.201 2t, ... 

Depending on the choice of transfer agent, mono- or di-cnd-functional polymers may be produced. Addition-fragmentation transfer agents such as functional allyl sulfides (Scheme 7.16), benzyl ethers and macromonomers have application in this context (Section 6.2.3).212 216 The synthesis of PEG-block copolymers by making use of PEO functional allyl peroxides (and other transfer agents has been described by Businelli et al. Boutevin et al. have described the telomerization of unsaturated alcohols with mercaptoethanol or dithiols to produce telechelic diols in high yield. 

Ebdon and coworkers22 "232 have reported telechelic synthesis by a process that involves copolymerizing butadiene or acetylene derivatives to form polymers with internal unsaturation. Ozonolysis of these polymers yields di-end functional polymers. The a,o>dicarboxy1ic acid telechelic was prepared from poly(S-s tot-B) (Scheme 7.19). Precautions were necessary to stop degradation of the PS chains during ozonolysis. 28 The presence of pendant carboxylic acid groups, formed by ozonolysis of 1,2-diene units, was not reported. 

ADMET is quite possibly the most flexible transition-metal-catalyzed polymerization route known to date. With the introduction of new, functionality-tolerant robust catalysts, the primary limitation of this chemistry involves the synthesis and cost of the diene monomer that is used. ADMET gives the chemist a powerful tool for the synthesis of polymers not easily accessible via other means, and in this chapter, we designate the key elements of ADMET. We detail the synthetic techniques required to perform this reaction and discuss the wide range of properties observed from the variety of polymers that can be synthesized. For example, branched and functionalized polymers produced by this route provide excellent models (after quantitative hydrogenation) for the study of many large-volume commercial copolymers, and the synthesis of reactive carbosilane polymers provides a flexible route to solvent-resistant elastomers with variable properties. Telechelic oligomers can also be made which offer an excellent means for polymer modification or incorporation into block copolymers. All of these examples illustrate the versatility of ADMET. 

SYNTHETIC METHODS SILICON-CONTAINING POLYMERS, FUNCTIONALIZED POLYOLEFINS, AND TELECHELICS... 

Another example of the flexibility of ADMET is the demonstration of successful polymerization of o /v-telechelic diene carbosilane macromonomers.45 The synthesis of macromonomer 30 is achieved using catalyst 23 and copolymerized with a rigid small-molecule diene, 4,4/-di-trans-l-propenylbiphenyl (Fig. 8.17). 

Figure 8.17 Copolymerization of telechelic oligomer 30 with a rigid aromatic diene.

This strategy is used for the synthesis of three different exact-mass telechelic oligomers. GPC, NMR, and GC/MS evidence indicates that clean depolymerization chemistry occurs for all three samples. Poly( 1,4-butadiene) (38) is broken down into oligomeric units with two, three, and four repeat units using catalyst 23. Catalyst 14 is more efficient and produces even lower molecular weight oligomers, primarily one and two repeat units. When allylchlorodimethylsilane is used instead of ethylene with 14, telechelic dimers are the only product. 

Figure 8.20 Metathesis depolymerization produces exact-mass telechelic oligomers.

Figure 8.21 Synthesis of various difunctional telechelic oligomers via ADMET depolymerization.

Diol-functionalized telechelic polymers have been desired for the synthesis of polyurethanes however, utilizing alcohol-functionalized a-olefins degrades both 14 and 23. Consequently, in order for alcohols to be useful in metathesis depolymerization, the functionality must be protected and the oxygen atom must not be /3 to the olefin or only cyclic species will be formed. Protection is accomplished using a/-butyldimcthylsiloxy group, and once protected, successful depolymerization to telechelics occurs readily. 

Imide-terminated telechelics are also synthesized by metathesis depolymerization, and it is found that phthalimide-substituted olefins allow for productive depolymerization when only one methylene spacer separates the nitrogen atom and the olefin (Fig. 8.21). This combination of steric hindrance around the nitrogen lone pair and decreased electron donation from resonance prevents the negative neighboring group effect. However, secondary acyclic amines are unable to produce telechelics through metathesis depolymerization because of unfavorable catalyst-amine interactions. 

In order to prove that intramolecular cyclization occurs before telechelic oligomer formation, an experiment similar to previous work by Calderonlf is performed using 14 in place of Calderon s classical catalyst system. Macrocyclic species are formed when a toluene solution of polybutadiene is exposed to this catalyst, supported by both NMR and GC data. The vinylic resonances are clearly shifted upfield from polybutadiene. GC analysis shows macrocyclic trimers and tetramer regioisomers. 

Dimethylphenol, synthesis of, 383 /V,/V-Dimorpholinodicthyl ether (DMDEE), 225, 230 Dinitrile-diamine polyamides, 158 Dioctyltin dilaurate, 232 Diol-functionahzed telechelic polymers, 457... 

Imide precursor, 317 Imide-terminated telechelics, 457 Impact strength tests, 243 Impet, 21... 

---