Suspension heterogeneous

Suspensions Heterogeneous systems containing coarsely dispersed material that settles. A wide variety of pharmaceutical preparations have been used as suspensions, for example. White Lotion, Magma of Bismuth, and Compound Mixture of Opium and Glycyrrhiza (Brown Mixture). In addition, several official ointments are suspensions of solids in a semisolid base. A large number of suspensions are categorized as mixtures in the United States Pharmacopeia and the National Formulary ... 

Emulsion Polymerization. Emulsion and suspension reactions are doubly heterogeneous the polymer is insoluble in the monomer and both are insoluble in water. Suspension reactions are similar in behavior to slurry reactors. Oil-soluble initiators are used, so the monomer—polymer droplet is like a small mass reaction. Emulsion polymerizations are more complex. Because the monomer is insoluble in the polymer particle, the simple Smith-Ewart theory does not apply (34). 

Dispersion Characteristics The chief characteristics of gas-in-liquid dispersions, like those of hquid-in-gas suspensions, are heterogeneity and instabihty. The composition and structure of an unstable dispersion must be obsei ved in the dynamic situation by looking at the mixture, with or without the aid of optical devices, or by photographing it, preferably in nominal steady state photographs usually are required for quantitative treatment. Stable foams may be examined after the fact of their creation if they are sufficiently robust or if an immobilizing technique such as freezing is employed [Chang et al., Ind. Eng Chem., 48, 2035 (1956)]. 

In the present work the acid-base surface properties of three Al O samples for a chromatography are investigated acidic (I), basic (II) and neutral (III) ones with the using of heterogeneous titration of their suspensions by HCl and NaOH solutions. To establish the correlations between the acid-base and adsoi ption properties studied Al O the representatives of cationic dyes -diamond green (DG), fuchsine (F) and anionic dyes - eriochrom black T and chromic dark blue have been used. 

There are a large number of processes in the chemical industries that handle a variety of suspensions of solid particles in liquids. The application of filtration techniques for the separation of these heterogeneous systems is sometimes very costly. If, however, the discrete phase of the suspension largely contains settleable particles, the separation can be effected by the operation of sedimentation. The process of sedimentation involves the removal of suspended solid particles from a liquid stream by gravitational settling. This unit operation is divided into thickening,... 

Primary nucleation is the classical form of nucleation. It occurs mainly at high levels of supersaturation and is thus most prevalent during unseeded crystallization or precipitation. This mode of nucleation may be subdivided into either homogeneous viz. spontaneously from clear solution, or heterogeneous viz. in the presence of dust particles in suspension, or solid surfaces. 

As with organic solvents, proteins are not soluble in most of the ionic liquids when they are used as pure solvent. As a result, the enzyme is either applied in immobilized form, coupled to a support, or as a suspension in its native form. For production processes, the majority of enzymes are used as immobilized catalysts in order to facilitate handling and to improve their operational stability [24—26]. As support, either inorganic materials such as porous glass or different organic polymers are used [27]. These heterogeneous catalyst particles are subject to internal and external... 

The values of these ratios change appreciably by passing from the heterogeneous (suspension) to the homogeneous (DMF) system. In the case of copolymerization in suspension in the presence of the K2S208—AgN03 oxidation-reduction system at 30—40 °C, the ratios were found to be ry = 0,77 0,2 and r2 = 1,09 0,04, whereas in the case of the copolymerization in solution they are = 0,52 and r2 = 1,7. The difference in these values seems to be the result of the different solubility of the monomers in water and of the different rate of diffusion of the monomers to the surface of the precipitated copolymer20. From this it follows that 4 is the more reactive monomer in this binary system. 

There were several studies of hydraulic transport in the 1950s, sparked off particularly by an interest in the economic possibilities of transportation of coal and other minerals over long distances. Newitt et al.p2) working with solids of a range of particle sizes (up to 5 fim) and densities (1180-4600 kg/m3) in a 25 mm diameter pipe, suggested separate correlations for flow with a bed deposit and tor conditions where the particles were predominantly in heterogeneous suspension. 

ZANDt and Govatos 45 suggest that the transition from flow with bed formation to flow as a heterogeneous suspension occurs at the condition where ... 

Wilson, K. C. and Puoh, F. ]. Can. Ji. Chem. Eng. 66 (1988) 721. Dispersive-force modelling of turbulent suspensions in heterogeneous slurry flow. 

Particles whose dimensions are between 1 nanometer and 1 micrometer, called colloids, are larger than the t3/pical molecule but smaller than can be seen under an optical microscope. When a colloid is mixed with a second substance, the colloid can become uniformly spread out, or dispersed, throughout the dispersing medium. Such a dispersion is a colloidal suspension that has properties intermediate between those of a true solution and those of a heterogeneous mixture. As Table 12-3 demonstrates, colloidal suspensions can involve nearly any combination of the three phases of matter. Gas-gas mixtures are the exception, because any gas mixes uniformly with any other gas to form a true solution. 

Ultrafiltration of heterogenous colloidal suspensions such as citrus juice is complex and many factors other than molecular weight contribute to fouling and permeation. For example, low MW aroma compounds were unevenly distributed in the permeate and retentate in UF in 500 kd MWCO system (10). The authors observed that the 500 kd MWCO UF removed all suspended solids, including pectin and PE. If PE is complexed to pectate in an inactive complex, then it is conceivable that release of PE from pectin with cations will enhance permeation in UF. At optimum salt concentration, less PE activation was observed at lower pH values than at higher pH (15). In juice systems, it is difficult to separate the effect of juice particulates on PE activity. Model studies with PE extracts allows UF in the absence of large or insoluble particulates and control of composition of the ultrafilter. In... 

---