Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Surface treatment of metals

Preparing the surface of a metallic sample involves multiple steps, and the sum of these steps are not always applied. Obtaining a quality adhesive bond without cleaning (and abrading) the metal [Pg.49]

Handbook of Adhesives and Surface Preparation, ed. Sina Ebnesajjad. IX)I 10.1016/B978-1-4377-4461-3.10005-7 2011 Elsevier Inc. All rights reserved. [Pg.49]

TTiis chapter has been adapted from Material Surface Preparation Techniques in Surface Treatment of Materials for Adhesion Bonding, S. Ebnesajjad C.F. Ebnesajjad 2006 Elsevier Inc. [Pg.49]

Metals Grit blast Loose material (weak boundary) removal from the surfaoe and Increase In contact surface area [Pg.50]

Metals Acid etch/llquid pickling Surface oxidation [Pg.50]

Inorganic waste with metals from metal treatment and the coating of metals non-ferrous hydro-metallurgy Wastes from shaping and surface treatment of metals and plastics Oil wastes (except edible oils, 0500 and 1200)... [Pg.520]

Hartwell, R. R., Surface Treatment of Metals, Amer. Soc. Metals, Cleveland, Ohio, 69 (1941)... [Pg.515]

Wastes from shaping and surface treatment of metals and plastics... [Pg.523]

The chemistry of hydrogen peroxide and Caro s acid can be used in many applications involving metals metal extraction and separation from ores or waste, hydrometallurgy, and surface treatment of metals and alloys. Compared to alternative treatments, the direct chemical costs are sometimes higher, but the difference is often outweighed by advantages in simplicity of operation (cost savings on equipment), and in lower overall effluent production. [Pg.245]

The principal areas of science and engineering dealing with metals and alloys are chemical metallurgy and physical metallurgy. Subjects of chemical metallurgy are the extraction and refining of metals, liquid metal treatments, corrosion protection, and surface treatment of metals. The study of metals and alloys with respect to their crystal structures, constitution, microstructure, and properties (especially, mechanical) is the subject of physical metallurgy. ... [Pg.117]

Fig. 5.63 a Electrically heated oven for the surface treatment of metal plates, b Hollow enclosure for the calculation of the radiative exchange of the top half of the oven... [Pg.584]

Beilstein Handbook Reference) AI3-62190 Benzene, 1,r-(sulfinylbis(methylene))bis- Benzyl sulfoxide BRN 2049262 Dibenzyl sulfoxide Dibenzyl sulphoxide EINECS 210-668-7 NSC 55 Preventol Cl 5 Sulfoxide, dibenzyl Tardiol D. An organic inhibitor for use in cleansing acids and in the surface treatment of metals. Leaflets mp = 134° bpn 210° (dec) Xm = 220, 253, 260, 266, 270 nm (MeOH) insoluble in H2O, soluble in EtzO,... [Pg.189]

In some cases, foundries also perform assembly, surface finishing and coating of the castings. However, these activities are not discussed in this document. Surface finishing and coating techniques are discussed in the BREF documents on Surface Treatment of Metals (STM BREF) and on Surface Treatment Using Solvents (STS BREF). [Pg.87]

Reference Document on Best Available Techniques for the Surface Treatment of Metals STM... [Pg.365]

See other pages where Surface treatment of metals is mentioned: [Pg.119]    [Pg.947]    [Pg.948]    [Pg.949]    [Pg.953]    [Pg.959]    [Pg.961]    [Pg.965]    [Pg.967]    [Pg.971]    [Pg.973]    [Pg.979]    [Pg.983]    [Pg.985]    [Pg.987]    [Pg.989]    [Pg.993]    [Pg.999]    [Pg.1001]    [Pg.1003]    [Pg.1007]    [Pg.116]    [Pg.792]    [Pg.281]    [Pg.119]    [Pg.281]    [Pg.245]    [Pg.947]    [Pg.948]    [Pg.949]    [Pg.951]    [Pg.953]    [Pg.955]    [Pg.957]    [Pg.959]    [Pg.961]    [Pg.963]   
See also in sourсe #XX -- [ Pg.38 , Pg.39 ]

See also in sourсe #XX -- [ Pg.36 , Pg.39 ]



SEARCH



Metal surface treatment

Surface of metals

© 2024 chempedia.info