Surface condensers evolution

The complete assembly for carrying out the catalytic decomposition of acids into ketones is shown in Fig. Ill, 72, 1. The main part of the apparatus consists of a device for dropping the acid at constant rate into a combustion tube containing the catalyst (manganous oxide deposited upon pumice) and heated electrically to about 350° the reaction products are condensed by a double surface condenser and coUected in a flask (which may be cooled in ice, if necessary) a glass bubbler at the end of the apparatus indicates the rate of decomposition (evolution of carbon dioxide). The furnace may be a commercial cylindrical furnace, about 70 cm. in length, but it is excellent practice, and certainly very much cheaper, to construct it from simple materials. 

The condensation of the precursors (defects previously created) occurs in the area where they are in greater amormt, that is, in the zone of creatioa For defects created in the bulk, condensation occurs in the bulk, and for defects created at surfaces, condensation occms inside the initial solid in the irrunediate vicinity of the interface. Thus, condensation occurs in only one zone and this zone has, in all the cases, the sizes that constantly remain equal to those of the zones implied in the creation of the precursor. We can say that the whole of nucleation occmrs, according to the case, in one or more zones, but that in this last case, sizes of these zones constantly remain equal to each other during the evolution of the system. 

Equip a 1 litre bolt-head flask with dropi)ing fuuncl and a double surface reflux condenser to the top of the latter attach a device (e.g.. Fig. II, 8, 1. c) for the absorption of the hydrogen bromide evolved. Place 100 g. (108 ml.) of dry iso-valeric acid (Section 111,80) and 12 g. of pmified red phosphorus (Section 11,50,5) in the flask. Add 255 g. (82 ml.) of dry bromine (Section 11,49,5) slowly through the dropping funnel at such a rate that little or no bromine is lost with the hydrogen bromide evolved the addition occupies 2-3 hours. Warm the reaction mixture on a water bath until the evolution of hydrogen bromide is complete and the colour of the bromine has disappeared. Pour off the liquid reaction product into a Claisen flask and distil mider the reduced pressure of a water pump. Collect the a-bromo-wo-valeryl bromide at 117-122°/25-30 mm. The yield is 150 g. 

---