Supercritical water oxidation references

Fig. 5.8 Examples of oxidative water treatment technologies used in industry, research and development [adapted from FIGAWA (1997), and supplemented by novel methods]. The numbers 1 to 9 refer to the generalized reaction sequences presented in Figure 5-9. a) Oxidation at elevated temperatures between 220°C < T <300°C or supercritical water oxidation at AT >374°C, Ap >221 bar (221000 kPa) (cf Chapter 1) b) oxidation in the presence of bimetallics Fe°/Ni° or Zn°/Ni° (Cheng and Wu, 2001) or heterogeneous oxidation in supercritical water catalyzed by metals Me = Cu, Ag, Au/Ag-alloy c) Fenton reaction at pH <5 d) photo-assisted Fenton reaction, irradiation in the UV-B/VIS range e) the mixture of oxidants O3/H2O2 is called PEROXONE f) ozonation using solid-bed catalysts with conditioned activated carbon (AC) g) vacuum-UV photolysis of water.

Carbon dioxide is not the only nonflammable, biocompatible, and widely available solvent. Let us not forget about water. In particular, supercritical water oxidation and related reactive processes have shown a tremendous capacity for reducing toxic chemicals to innocuous constituents. Akiya and Savage have authored a recent review. Of particular interest is the section on hydrolysis in SCF water. Numerous references are tabulated according to chemical family. With regard to the more toxic compounds, Klein et al. have been especially active for many years and Tester et al. have focused on alkyl halides. ... 

The main advantage of using catalysts in SCWO processes is to reduce the operating temperature. A complete review of catalytic oxidation in supercritical water can be found in reference [8]. 

---