Sulphur hydrides sulphide

In addition to the hydrides of formula HjX, oxygen forms the hydride H2O2, hydrogen peroxide, and sulphur forms a whole series of hydrides called sulphanes. These are yellow liquids which are thermodynamically unstable with respect to hydrogen sulphide and sulphur. 

Since the hydrogen-element bond energy decreases from sulphur to tellurium they are stronger acids than hydrogen sulphide in aqueous solution but are still classified as weak acids—similar change in acid strength is observed for Group Vll hydrides. 

Two contrasting conclusions have been reported in the reactions of lithium aluminium hydride in THF with phosphine oxides and phosphine sulphides respectively. The secondary oxide, phenyl-a-phenylethylphos-phine oxide (42), has been found to be racemized very rapidly by lithium aluminium hydride, and this observation casts some doubt on earlier reports of the preparation of optically active secondary oxides by reduction of menthyl phosphinates with this reagent. A similar study of the treatment of (/ )-(+ )-methyl-n-propylphenylphosphine sulphide (43) with lithium aluminium hydride has revealed no racemization. These results have been rationalized on the basis of the preferred site of attack of hydride on the complexed intermediate (44), which, in the case of phosphine oxides (X = O), is at phosphorus, and in the case of the sulphides (X = S), is at sulphur. Such behaviour is comparable to that observed during the reduction of phosphine oxides and sulphides with hexachlorodisilane. ... 

It is intriguing to note that this reaction scheme for the reduction of a sulphone to a sulphide leads to the same reaction stoichiometry as proposed originally by Bordwell in 1951. Which of the three reaction pathways predominates will depend on the relative activation barriers for each process in any given molecule. All are known. Process (1) is preferred in somewhat strained cyclic sulphones (equations 22 and 24), process (2) occurs in the strained naphtho[l, 8-hc]thiete 1,1-dioxide, 2, cleavage of which leads to a reasonably stabilized aryl carbanion (equation 29) and process (3) occurs in unstrained sulphones, as outlined in equations (26) to (28). Examples of other nucleophiles attacking strained sulphones are in fact known. For instance, the very strained sulphone, 2, is cleaved by hydride from LAH, by methyllithium in ether at 20°, by sodium hydroxide in refluxing aqueous dioxane, and by lithium anilide in ether/THF at room temperature. In each case, the product resulted from a nucleophilic attack at the sulphonyl sulphur atom. Other examples of this process include the attack of hydroxide ion on highly strained thiirene S, S-dioxides , and an attack on norbornadienyl sulphone by methyllithium in ice-cold THF . ... 

In Volume 4 the decompositions of inorganic and metal organic compounds are discussed (except for homonuclear diatomic molecules, considered in a later section). Chapter 1 covers hydrides (and deuterides) of oxygen, sulphur, nitrogen, boron, etc, Chapter 2 deals with oxides, sulphides and derivatives, Chapter 3 with... 

Phillips and Timms [599] described a less general method. They converted germanium and silicon in alloys into hydrides and further into chlorides by contact with gold trichloride. They performed GC on a column packed with 13% of silicone 702 on Celite with the use of a gas-density balance for detection. Juvet and Fischer [600] developed a special reactor coupled directly to the chromatographic column, in which they fluorinated metals in alloys, carbides, oxides, sulphides and salts. In these samples, they determined quantitatively uranium, sulphur, selenium, technetium, tungsten, molybdenum, rhenium, silicon, boron, osmium, vanadium, iridium and platinum as fluorides. They performed the analysis on a PTFE column packed with 15% of Kel-F oil No. 10 on Chromosorb T. Prior to analysis the column was conditioned with fluorine and chlorine trifluoride in order to remove moisture and reactive organic compounds. The thermal conductivity detector was equipped with nickel-coated filaments resistant to corrosion with metal fluorides. Fig. 5.34 illustrates the analysis of tungsten, rhenium and osmium fluorides by this method. 

Methylated poly(tertiary)phosphines, e.g. (18), can be made by the base-catalysed addition of P—H to vinylphosphine sulphides. The protecting sulphur atom(s) are removed by treatment with lithium aluminium hydride. 

---