Sulfonic acid amides chlorides

BMB reduces only specific functional groups. In tetrahydrofiirane at 0° it reduces aldehydes and ketones to alcohols, -y-valerolactone (11) to y-hydroxyvaleraldehyde (12), and N,N-dimethylamides to aldehydes. Under the same conditions it does not reduce carboxylic acids, sulfonic acids, amides, esters, acid chlorides, anhydrides, or sulfones. The failure of the carboxyl group to react makes possible the conversion... 

Although perfluorocarbon sulfonic acid groups are very stable chemically as well as thermally, perfluorocarbon sulfonyl halide, especially sulfonyl chloride groups, are quite reactive. For example, sulfonyl chloride groups react with oxidants, reductants, various amines, phenol compounds, iodine compounds, etc. and give carboxylic acid, sulfinic acid, sulfonic acid amide, -CF2I and so forth. Some examples of how this feature can be used to generate various kinds of membranes will next be described... 

Sulfonic acid amides from thioethers via sulfonic acid chlorides s. 3, 420 SR -y S02NHs... 

Sodium hydroxide Sulfonic acid amides from sulfonic acid chlorides... 

Sulfonylisocyanates from sulfonic acid amides via sulfonyloxamyl chlorides... 

Cupric acetate Amines from chlorides via sulfonic acid amides Preferential replacement of halogen... 

Reactions of vinylogous amides with methanesulfonyl chloride also led to the formation of six-membered rings. Here the initial attack on oxygen produces a zwitterionic intermediate which can collapse to an enol sulfonic acid lactone (383,469). 

The antiparasitic drug clorsulon (206), contains a rather unusual trichloroethylene group. This function is established early in the syntliesis by treatment of the perhalogenated compound 203 obtained from reduction of 202 with iron powder. Chlorosulfonation of 204 by means of chloro-sulfonic acid, followed by conver.sion of. sulfonyl chloride 205 to the amide, gives clorsulon (206) 153],... 

Sulfonyl chlorides as well as esters and amides of sulfonic acids can be hydrolyzed to the corresponding acids. Sulfonyl chlorides can by hydrolyzed with water or with an alcohol in the absence of acid or base. Basic catalysis is also used, though of course the salt is the product obtained. Esters are readily hydrolyzed, many with water or dilute alkali. This is the same reaction as 10-4, and usually involves R —0 cleavage, except when R is aryl. However, in some cases retention of configuration... 

Aldicarb nitrile, see Aldicarb Aldicarb nitrile sulfone, see Aldicarb Aldicarb nitrile sulfoxide, see Aldicarb Aldicarb oxime, see Aldicarb Aldicarb oxime sulfone, see Aldicarb Aldicarb oxime sulfoxide, see Aldicarb Aldicarb sulfone, see Aldicarb Aldicarb sulfone acid, see Aldicarb Aldicarb sulfone alcohol, see Aldicarb Aldicarb sulfone aldehyde, see Aldicarb Aldicarb sulfone amide, see Aldicarb Aldicarb sulfone oxime, see Aldicarb Aldicarb sulfoxide, see Aldicarb Aldicarb sulfoxide acid, see Aldicarb Aldicarb sulfoxide alcohol, see Aldicarb Aldicarb sulfoxide aldehyde, see Aldicarb Aldicarb sulfoxide amide, see Aldicarb Aldicarb sulfoxide nitrile, see Aldicarb Aldicarb sulfoxide oxime, see Aldicarb Aldrin, see Dieldrin Aldrin diol, see Aldrin Alkyl hydroperoxides, see Acetaldehyde Allyl alcohol, see Allyl chloride, l,2-Dibromo-3-chloropropane, 1,2-Dichloropropane Allylbenzene, see Isopropylbenzene p-(2-Atnino-3-nitrophenyl)glucopyranoside, see 2-Nitroaniline Allyl chloride, see Allyl alcohol, l,2-Dibromo-3-chloropropane, 1,2-Dichloropropane 2-Aminobenzimidazole, see Benomvl... 

Sulfonic acids, R(Ar)S03H, form derivatives similar to those of carboxylic acids (see Table 16-3). These are sulfonyl chlorides, sulfonates (esters), and sulfonamides. The transsulfonylation reactions are similar to the transacylation reactions, except that the ester and amide cannot be made directly from the acid. See Problem 13.17 for preparation of sulfonyl chlorides and esters and Problem 13.18 for use of sulfonate esters as substrates in S l and S,42 reactions. 

Alternatively, sulfonamides can also be prepared by oxidation of sulfinamides with periodate (Entry 3, Table 8.8) or with MCPBA [125]. Polystyrene-bound sulfonyl chlorides, which can be prepared from polystyrene-bound sulfonic acids by treatment with PCI5, SOCI2 [126-129], CISO3H [130], or SO2CI2/PPI13 [131], react smoothly with amines to yield the corresponding sulfonamides (Entry 4, Table 8.8). Support-bound carbamates of primary aliphatic or aromatic amines can be N-sulfonylated in the presence of strong bases, and can therefore be used as backbone amide linkers for sulfonamides (Entries 5 and 6, Table 8.8). 

Dansyl chloride and phenylisothiocyanate (PITC) are the derivatizating agents most used in UV detection. Dansyl chloride reacts with the primary and secondary amino groups of peptides in a basic medium (pH 9.5), forming dansylated derivatives that are very stable to hydrolysis but are photosensitive. The derivatives are detectable in UV at 254 nm and by fluorescence. Dansyl sulfonic acid is formed as a by-product of the reaction, and excess reagent reacts with the dansyl derivatives to form dansyl amide the conditions of derivatization must therefore be optimized in order to avoid the formation of such by-products to the extent possible. The conditions of the reaction with dansyl chloride and of the separation of the derivatives thus formed have been thoroughly studied (83,84). Martin et al. (85) carried out derivatization using an excess concentration of dansyl chloride of 5 -10-fold in a basic medium (lithium carbonate, pH 9.5) in darkness for 1 h. 

Sulfonic acids, like sulfuric acid, are much stronger acids than carboxylic acids. However, their chemical behavior resembles that of carboxylic acids in many other respects. Sulfonic acids form the same type of derivatives, sulfonyl chlorides, esters, amides, and so on, as do carboxylic acids. These derivatives are intercon-verted by nucleophilic substitution reactions that resemble those of carboxylic acid derivatives. 

A primary or secondary amine attacks a sulfonyl chloride and displaces chloride ion to give an amide. Amides of sulfonic acids are called sulfonamides. This reaction is similar to the formation of a sulfonate ester from a sulfonyl chloride (such as tosyl chloride) and an alcohol (Section 11-5). 

Camphor-10-sulfonic acid (1) is available in large quantities in both enantiomeric forms. In only 3 steps the cyclic sulfonamide 2 (sultam) can be synthesized, which can be acylated with acid chlorides after deprotonation with sodium hydride (Scheme 1) [1, 2]. The resulting amides 3 are considerable more reactive towards nucleophiles than the corresponding carboxylic esters and the a,/ -unsaturated derivatives undergo, with excellent selectivities, Diels-Alder reactions or Michael additions under mild conditions. Al-... 

---