Sulfides carbanions

There are many synthetic applications for sulfide carbanions. Sulfide 304 required the addition of DABCO to facilitate deprotonation by butyllithium, but the resulting anion coupled readily with allylic chloride 305 under these conditions to give 306. The sulfide moiety was removed by a dissolving metal reduction (for example, see secs. 4.9.D, 4.9.F) to give dendrolasin, 307.The ability to remove the sulfur after activating... 

Sulfonate carbanions have been used less extensively than sulfone, sulfoxide, and sulfide carbanions. Sulfonates are good leaving groups and subject to nucleophilic displacement or elimination in the presence of the bases required to generate the carbanion. Cyclic sulfonates (sultones such as 330) have been alkylated via... 

Carbanions in the form of ylides also add to azirines. For example, treatment of 1-azirine (227) with dimethylsulfonium methylide gives 1-azabicyclobutane (229) in good yield (72JA2758). The addition of the methylene group occurs by initial nucleophilic attack by the ylide to give intermediate (228) which cyclizes with expulsion of dimethyl sulfide. 

Perfluoroisobutylene and potassium sulfide give 2,4-bis[hexafluoroisopro-pylidene]-l,3-dithietane and a small amount of the bis(perfluoro-tcrr-butyl)trisul-fide. The trisulfide is the result of a reaction of the nascent perfluoro-rerr-butyl carbanion with sulfur. The same products in different yields are obtained with sulfur and cesium fluoride [i] (equation 2). 

A somewhat more complex side chain is incorporated by alkylation of the carbanion of the substituted cyanoacetate, 148, with 2-chloroethylmethyl sulfide. Condensation of the resulting cyanoester (149) with thiourea followed by hydrolysis of the resulting imine (150) affords methitural (151)... 

Freparatively useful induced diastereoselectivities have been reported mainly for 1,1-di-substituted allyllithium derivatives which bear carbanion-stabilizing substituents. l-[Methyl-thio-l-(trimethylsilyl)-2-propenyl]lithium106 and the appropriate 1-phenylthio107 derivative, generated from the allylic sulfide with sec-butyllithium, in the reaction with tetrahydropyranyl-protected pregnolone, furnish a single diastereomer. 

The big difference between the extent of asymmetric induction on the addition to a prostereogenic carbonyl group of simple carbanions a to a chiral sulfoxide on the one hand and enolates of sulfinyl esters on the other, can be attributed to the capacity of the ester function to chelate magnesium in the transition states and intermediates. The results already described for the addition of chiral thioacetal monosulfoxide to aldehydes (see Section 1.3.6.5.) underscore the importance of other functions, e.g., sulfide, for the extent of asymmetric induction. 

Thia-[2,3]-Wittig sigmatropic rearrangement of lithiated carbanions 47, obtained by deprotonation of the S-allylic sulfides 46, affords the thiols 48 or their alkylated derivatives 49. The corresponding sulfonium ylides 51, prepared by deprotonation of the sulfonium salts 50 also undergoes a [2,3]-sigmatropic shift leading to the same sulfides 49 [36,38] (Scheme 13). As far as stereochemistry is concerned, with crotyl (R R =H,R =Me) and cinnamyl (R, R =H,R =Ph) derivatives, it has been shown that the diastereoselectivity depends on the nature of the R substituent and on the use of a carbanion or an ylide as intermediate. 

Nucleophilic addition to a, -unsaturated sulfones has long been known. For example, treatment of divinyl sulfone with sodium hydroxide has been known to afford bis( -hydroxyethyl) sulfone "", while the reaction of a- and -naphthyl allyl sulfones and allyl benzyl sulfone " with alkali hydroxide or alkoxide gave -hydroxy or alkoxy derivatives. In the latter reaction, the allyl group underwent prototropy to the 1-propenyl group, which in a subsequent step underwent nucleophilic attack . Amines, alcohols and sulfides are known to add readily to a, -unsaturated sulfones, and these addition reactions have been studied widely. In this section, the addition of carbon nucleophiles to a, ji-unsaturated sulfones and the reactions of the resulting a-sulfonyl carbanions will be examined. 

Since alkyllithium compounds and their carbanions have an isoelectronic structure with alkoxides, their reaction behavior with carbenes is expected to be similar to that of alkoxides, showing enhanced reactivity in both C-H insertion and hydride abstraction.35 In this reaction, the hydride abstraction cannot be followed by recombination and, therefore, can be differentiated from the insertion. Indeed, the reaction of alkyllithium compounds 70 or nitrile anions (see Section IV.B) with ethyl(phenylthio)carbenoid, which is generated by the reaction of 1-chloropropyl sulfide 69 with BuLi, takes place at the -position of 70 more or less in a similar manner giving both insertion product 71 and hydride abstraction products 72 and 73, respectively. This again supports a general rule C-H bonds at the vicinal position of a negatively charged atom are activated toward carbene insertion reactions (Scheme 22). 

An explanatory mechanism for the formation of vinyl sulfides is shown in Scheme 24. In route a, (phenylthio)carbene 77 generated from chlorosulfide 75 reacts with the nitrile anion to form (phenylthio)carbanion 79, which then undergoes elimination of cyanide ion to produce vinyl sulfide 76. In route b, 75 reacts first with the nitrile anion 74 to produce P-(phenylthio)nitrile 78 followed by base-catalyzed P-elimination. However, route b is unlikely because 79 cannot be generated from 68 due to a larger pKa value of its ot proton than that of the nitrile. In fact, the reaction of chlorosulfide 75a with lithionitrile 80 gave a different product 81 in 63% yield. 

The pioneering work on thia-[2,3]-Wittig rearrangement was reported by Rautenstrauch in 1971 °. The reaction of allyl sulfides 137 with n-BuLi at —30°C for 1.5-4 h gave homoallyl sulfide or thiol 138 ([2,3]-product) exclusively (equation 81). In contrast, a similar reaction of vinyl sulfide 139 gave no [1,2]-rearrangement product 141 albeit a-thio-carbanion was generated as shown by its methylation to 140 (equation 82) °. 

The most popular method for generation of a-thio-carbanion (migration terminus) is direct lithiation (deprotonation) with alkyllithium or lithium amide. These deprotonation methods are widely applicable to various substrates, not only benzyl or allyl sulfides , but also dithioacetals 142 which form 143 (equation 83), and a phosphonate substituted system 144 which gives 145 (equation 84). ... 

The previous sections have dealt primarily with reactions in which the new carbon-carbon bond is formed by an SN2 reaction between the nucleophilic carbanions and the alkylating reagent. Another important method for alkylation of carbon involves the addition of a nucleophilic carbon species to an electrophilic multiple bond. The electrophilic reaction partner is typically an a,/i-unsaturated ketone, aldehyde, or ester, but other electron-withdrawing substituents such as nitro, cyano, or sulfonyl also activate carbon-carbon double and triple bonds to nucleophilic attack. The reaction is called conjugate addition or the Michael reaction. Other kinds of nucleophiles such as amines, alkoxides, and sulfide anions also react similarly, but we will focus on the carbon-carbon bondforming reactions. 

The range of monomers that can be incorporated into block copolymers by the living anionic route includes not only the carbon-carbon double-bond monomers susceptible to anionic polymerization but also certain cyclic monomers, such as ethylene oxide, propylene sulfide, lactams, lactones, and cyclic siloxanes (Chap. 7). Thus one can synthesize block copolymers involving each of the two types of monomers. Some of these combinations require an appropriate adjustment of the propagating center prior to the addition of the cyclic monomer. For example, carbanions from monomers such as styrene or methyl methacrylate are not sufficiently nucleophilic to polymerize lactones. The block copolymer with a lactone can be synthesized if one adds a small amount of ethylene oxide to the living polystyryl system to convert propagating centers to alkoxide ions prior to adding the lactone monomer. 

---