Stereoselective chiral auxiliaries

Chiral Controller. (Synonymous with Chiral Auxiliary). A chiral structural unit which when attached to a substrate enhances stereoselectivity in the formation of new stereocenter(s). 

The powerful influence of an oxygen substituent on the rate and stereoselectivity of cyclopropanation augured well for the development of a chiral auxiliary based approach to asymmetric synthesis [54]. The design of the chiral auxiliary would take into account ... 

Most asymmetric induction processes with Chital auxiliaries involve a stereo-differentiating reaction that affords one diastereomet as the primary product To obtain the desired enantiomer, the Chiral auxiliary must be removed Highly dia-stereoselective reactions between otganocoppet reagents and allylic substrates with... 

In addition to ketone enolates, azaenolatcs with chiral auxiliary groups attached to the nitrogen atom are suitable for the introduction of an a-unsubstituted enolate of the keto-type into an aldehyde in a stereoselective manner (see Section D.1.3.5.). 

Compared to the lithium enolates of l and 5, the higher stereoselectivity obtained by the Mukaiyama variation is, in general, accompanied by reduced chemical yields. The chiral alcoholic moieties of the esters 3 and 7 can be removed either by reduction with lithium aluminum hydride (after protection of the earbinol group) or by aqueous alkaline hydrolysis with lithium hydroxide to afford the corresponding carboxylic acid. In both cases, the chiral auxiliary reagent can be recovered. 

R)- and (,S )-1.1,2-Triphenyl-l,2-ethancdiol which are reliable and useful chiral auxiliary groups (see Section 1.3.4.2.2.3.) also perform ami-sclcctive aldol additions with remarkable induced stereoselectivity72. The (/7)-diastercomer, readily available from (7 )-methyl mandelate (2-hy-droxy-2-phcnylaeetate) and phenylmagnesium bromide in a 71 % yield, is esterified to give the chiral propanoate which is converted into the O-silyl protected ester by deprotonation, silylation, and subsequent hydrolysis. When the protected ester is deprotonated with lithium cyclohexyliso-propylamide, transmetalated by the addition of dichloro(dicyclopentadienyl)zirconium, and finally reacted with aldehydes, predominantly twm -diastereomers 15 result. For different aldehydes, the ratio of 15 to the total amount of the syn-diastereomers is between 88 12 and 98 2 while the chemical yields are 71 -90%. Furthermore, high induced stereoselectivity is obtained the diastereomeric ratios of ami-15/anti-16 arc between 95 5 and >98 2. 

In another approach, a glucose-derived titanium enolate is used in order to accomplish stereoselective aldol additions. Again the chiral information lies in the metallic portion of the enolate. Thus, the lithiated /m-butyl acetate is transmetalated with chloro(cyclopentadienyl)bis(l,2 5,6-di-0-isopropylidene- -D-glucofuranos-3-0-yl)titanium (see Section I.3.4.2.2.I. and 1.3.4.2.2.2.). The titanium enolate 5 is reacted in situ with aldehydes to provide, after hydrolysis, /i-hydroxy-carboxylic acids with 90 95% ee and the chiral auxiliary reagent can be recovered76. 

Crystalline, diastereomerieally pure syn-aIdols are also available from chiral A-acylsultams. lhe outcome of the induction can be controlled by appropriate choice of the counterion in the cnolate boron enolates lead, almost exclusively, to one adduct 27 (d.r. >97 3, major adduct/ sum of all other diastereomers) whereas mediation of the addition by lithium or tin leads to the predominant formation of adducts 28. Unfortunately, the latter reaction is plagued by lower induced stereoselectivity (d.r. 66 34 to 88 12, defined as above). In both cases, however, diastereomerieally pure adducts are available by recrystallizing the crude adducts. Esters can be liberated by treatment of the adducts with lithium hydroxide/hydrogen peroxide, whereby the chiral auxiliary reagent can be recovered106. 

Acetylsultam 15 is also used for stereoselective syntheses of a-unsubstituted /1-hydroxy-carboxylic acids. Thus, conversion of 15 into the silyl-A/O-ketene acetal 16 and subsequent titanium(IV) chloride mediated addition to aldehydes lead to the predominant formation of the diastereomers 17. After separation of the minor diastereomer by flash chromatography, alkaline hydrolysis delivers /f-hydroxycarboxylic acids 18, with liberation of the chiral auxiliary reagent 1919. 

When a mixture of aldehydes and (Z)-l-ethylthio-l-trimethylsilyloxy-l-propene is added slowly to a solution of tin(Il) triflate and 10-20 mol% of the chiral diamine 4 in acetonitrile, /1-silyloxy thioesters 5 are obtained in high simple diastereoselection and induced stereoselectivity. Thus, the chiral auxiliary reagent can be used in substoichiometric amount. A rationale is given by the catalytic cycle shown below, whereby the chiral tin(II) catalyst 6 is liberated once the complex 7 has formed33. 

An efficient stereoselective Strecker synthesis of phenylglycine has been achieved using the tert-butyl ester tm-leucine as the chiral auxiliary. Its benzaldimine reacts with hydrogen cyanide in hexane at — 23 °C to furnish the ( )-diastereomer with the excellent diastereoselectivity of >98 254. 

A decisive improvement in the stereoselective performance of the Ugi reaction was achieved by the use of 1-ferrocenylalkylamines, in particular, l-ferrocenyl-2-methylpropylamine. as the inducing chiral auxiliary 18, S7. The iminc formed from the (/ )-enantiomer and isobutyralde-hyde reacts at — 78 °C with tm-butyl isocyanidc and benzoic acid to give the (S )-valine derivative with a diastereoselectivity of about 100 1. 

The latter work is a rare example in which a high stereoselectivity was reported for a substrate-controlled Ugi synthesis. In asymmetric Ugi reactions carried out with removable chiral auxiliaries, however, high diastei eoselections were achieved (see Section 1.4.4.3.1.). 

In another approach to the meso problem , utilization of a chiral auxiliary attached at nitrogen appears to induce very high stereoselectivity. Reduction of the optically active imide 10a (see Appendix) with tetramethylammonium triacetoxyborohydridc in acetone/ acetic acid at 25 "C gives a 4 96 mixture of the diastcreomers 11a and 12a in 87% yield44. On changing the solvent to acetonitrile/acetic acid the diastereomeric ratio is improved to < 1 99, but the yield is lower (63%). 

Only one example, showing high stereoselectivity, is known in this class of reactions. On treatment of the acyclic glycine cation equivalent 1 (see Appendix), containing the ( + )-cam-phor-10-sulfonamide ester as a chiral auxiliary, with boron trifluoridc and anisole at 0"C a mixture of aromatic substitution products is obtained in essentially quantitative yield 55. Besides 11 % of cuV/io-substitution product, the mixture contains (R,S)-2 and its (/ ,/ )-epimer in a ratio >96 4 (NMR). The same stereoisomer 2 predominates when the reaction is conducted in sulfuric acid/acetic acid 1 9, although the selectivity is slightly lower (91 9 besides 25% of ortho substitution). 

To date, direct asymmetric synthesis of optically active chiral-at-metal complexes, which by definition leads to a mixture of enantiomers in unequal amounts thanks to an external chiral auxiUary, has never been achieved. The most studied strategy is currently indirect asymmetric synthesis, which involves (i) the stereoselective formation of the chiral-at-metal complex thanks to a chiral inductor located either on the ligand or on the counterion and then (ii) removal of this internal chiral auxiliary (Fig. 4). Indeed, when the isomerization of the stereogenic metal center is possible in solution, in-... 

Among the most useful carbonyl derivatives are (V-acyloxazolidinones, and as we shall see in Section 2.3.4, they provide facial selectivity in aldol addition reactions. l,3-Thiazoline-2-thiones constitute another useful type of chiral auxiliary, and they can be used in conjunction with Bu2B03SCF3,44 Sn(03SCF3)2,45 or TiCl446 for generation of enolates. The stereoselectivity of the reactions is consistent with formation of a Z-enolate and reaction through a cyclic TS. 

Camphor-derived sulfonamide can also permit control of enantioselectivity by use of additional Lewis acid. These chiral auxiliaries can be used under conditions in which either cyclic or noncyclic TSs are involved. This frequently allows control of the syn or anti stereoselectivity.143 The boron enolates give syn products, but inclusion of SnCl4 or TiCl4 gave excellent selectivity for anti products and high enantioselectivity for a range of aldehydes.145... 

Scheme 2.25 shows some examples of additions of enolate equivalents. A range of Lewis acid catalysts has been used in addition to TiCl4 and SnCl4. Entry 1 shows uses of a lanthanide catalyst. Entry 2 employs LiC104 as the catalyst. The reaction in Entry 3 includes a chiral auxiliary that controls the stereoselectivity the chiral auxiliary is released by a cyclization using (V-methylhydroxylamine. Entries 4 and 5 use the triphenylmethyl cation as a catalyst and Entries 6 and 7 use trimethylsilyl triflate and an enantioselective catalyst, respectively. 

As is the case for aldol addition, chiral auxiliaries and catalysts can be used to control stereoselectivity in conjugate addition reactions. Oxazolidinone chiral auxiliaries have been used in both the nucleophilic and electrophilic components under Lewis acid-catalyzed conditions. (V-Acyloxazolidinones can be converted to nucleophilic titanium enolates with TiCl3(0-/-Pr).320... 

The highly ordered cyclic TS of the D-A reaction permits design of diastereo-or enantioselective reactions. (See Section 2.4 of Part A to review the principles of diastereoselectivity and enantioselectivity.) One way to achieve this is to install a chiral auxiliary.80 The cycloaddition proceeds to give two diastereomeric products that can be separated and purified. Because of the lower temperature required and the greater stereoselectivity observed in Lewis acid-catalyzed reactions, the best diastereoselectivity is observed in catalyzed reactions. Several chiral auxiliaries that are capable of high levels of diastereoselectivity have been developed. Chiral esters and amides of acrylic acid are particularly useful because the auxiliary can be recovered by hydrolysis of the purified adduct to give the enantiomerically pure carboxylic acid. Early examples involved acryloyl esters of chiral alcohols, including lactates and mandelates. Esters of the lactone of 2,4-dihydroxy-3,3-dimethylbutanoic acid (pantolactone) have also proven useful. 

In Step D another thiazoline chiral auxiliary, also derived from cysteine, was used to achieve double stereodifferentiation in an aldol addition. A tin enolate was used. The stereoselectivity of this reaction parallels that of aldol reactions carried out with lithium or boron enolates. After the configuration of all the centers was established, the synthesis proceeded to P-D lactone by functional group modifications. 

A very short and efficient synthesis based on the desymmetrization principle is shown in Scheme 13.39. mc.vo-2,4-Dimethylglularaldchyde reacted selectively with the diethylboron enolate derived from a bornanesultam chiral auxiliary. This reaction established the stereochemistry at the C(2) and C(3) centers. The dominant aldol product results from an anti-Felkin stereoselectivity with respect to the C(4) center. 

---