Steam distillation continuous flash

Steam Distillation—Continuous Flash, Multicomponent or Binary... 

Batch with Constant Reflux Ratio, 48 Batch with Variable Reflux Rate Rectification, 50 Example 8-14 Batch Distillation, Constant Reflux Following the Procedure of Block, 51 Example 8-15 Vapor Boil-up Rate for Fixed Trays, 53 Example 8-16 Binary Batch Differential Distillation, 54 Example 8-17 Multicomponent Batch Distillation, 55 Steam Distillation, 57 Example 8-18 Multicomponent Steam Flash, 59 Example 8-18 Continuous Steam Flash Separation Process — Separation of Non-Volatile Component from Organics, 61 Example 8-20 Open Steam Stripping of Heavy Absorber Rich Oil of Light Hydrocarbon Content, 62 Distillation with Heat Balance,... 

Method 1. Arrange the flash containing the reaction mixture for steam distillation as in Fig. 11, 40, 1. Proceed with the steam distillation until crystals of p-dibromobenzene appear in the condenser. Change the receiver and continue with the distillation until all the p-dibromobenzene has passed over from time to time run out the water from the condenser so that the crystals melt and run down into the receiver. Reject the residue in the sk. Transfer the first distillate to a separatory funnel, wash it with a little water, and dry the lower layer with a little anhydrous magnesium sulphate or anhydrous calcium chloride filter. Distil slowly from a small distilling flask use a wire gauze or an air bath (Fig. 11,5,3). Collect the fraction which passes over at 150-170 pour the residue (B), while it is still hot, into a small beaker or porcelain basin for the isolation of p-dibromobenzene. Redistil the fraction of b.p. 150-170° and collect the bromobenzene at 154-157° (3). The yield is 60 g. 

---