Stability during polymerization

One important requirement in replacing a conventional, nonreactive surfactant with a reactive one is that neither the molecular weight nor the particle size distribution of the latex may significantly change. Also, the Surfmer reactivity is important if the Surfmer is too reactive compared to the other monomers in the recipe, it will become partially buried inside the growing polymer particles. This will cause poor stability during polymerization and broadening of the particle size distribution. 

Typical enulsifiers used in emulsion polymerization of VC are anirmic emulsifiers like sodium alkyl sulfonates, sodium diaUcyl sulfosucdnates, fatty acid soaps and sodium ethoxy sulfates. Neutral emulsifiers like alltyl phenol ethoxylates and fatty acid ethoxylates are often added during after polymerization in Oder b> increase latex stability. The emulsifiers are not only chosen for control of the particle formation and latex stability during polymerization, but for a number of other reasons like mechanical stability, reactor wall build-up, plastisol formation, heat and colour stability and water resistance of the final product [1]. 

Chemical Reactivity - Reactivity with Water No reaction Reactivity with Common Materials Corrosive, particularly when diluted. Attacks most common metals, including most stainless steels. Excellent solvent for many synthetic resins or rubber Stability During Transport Stable Neutralizing Agents for Acids and Caustics Dilute with water, rinse with sodium bicarbonate solution Polymerization Not pertinent Inhibitor of Polymerization Not pertinent. 

---