Spring-forward

Zahlan, N. and O Neill, J.M. (1989) Design and fabrication of composite components The spring-forward phenomenon. Composites, 20(1), 77-81. 

For warpage simulations using shell elements (Chap. 8), the thickness shrinkage is not involved in the stmctural analyses, and the spring forward effect must therefore be imposed. Figure 6.9 displays a predicted deflection of a box-like part (Bakharev et al. 2005). The concave warpage of the box is due to the comer effect. 

A spring-forward mechanism of shrinkage and warpage was modelled for fiber reinforced thermosets. The process is affected by the presence of release agents. 

The so-called spring-forward phenomena are observed in continuous fiber reinforced thermoset laminates. These materials have characteristic uneven dis-... 

The Back Pressure Regulator (BPR) shown at the end can be a gas dome-loaded Grove Inc. regulator or a spring-loaded Tescom model. The same holds for the forward pressure regulators. Instead of regulators, controllers can be used too, especially since small electronic control valves are now available. 

I step forward, alone, feeling my soul catch and hold to these same words, to the shape and spring of them, to the bowing of my knee, my lowered head, the pressing of my palms at my breast. 

I realized my jaw had fallen open, and closed it. Fortunately she was looking down at her hands, not at me. I was very young and very poor, so I was married off to a man very old and very rich. Then I met Zorzi, who showed me what I lacked. We were so in love... I simply cannot describe the difference he made to my life. It was spring after winter, it was daybreak. After his father s murder, he insisted I must not come forward to testify, but I was terrified that he might be accused of the killing. I went to my husband and told him what had happened. I said that I would have to report this to the Ten. He ordered me out of his house— but by then Zorzi had already fled to the mainland. After that I needed to earn a living, and I knew only one way I could do it. She gave Jacopo a wistful smile. 

The fuze (See Fig 1-84), consists of a diecast body (C) with a neck which houses the primer (A). A cavity in the middle of the fuze body, extending across the perpendicular to the fuze axis, holds a rotor (E) and a lock assembly (G). A body pin (F) serves to hold the lock cup and lock spring. The entire forward part of the fuze body and its mechanism is covered by a thin steel ogive (B). When sufficient rota-... 

---