Sol-gel content

For prolonged immersion (up to 18 months), the 1 8 PANI/sol gel ratio samples were chosen for testing as it was recognised that high sol-gel content improves the... 

In the present work it was studied the dependence of analytical characteristics of the composite SG - polyelectrolyte films obtained by sol-gel technique on the content of non-ionic surfactant in initial sol. Triton X-100 and Tween 20 were examined as surfactants polystyrene sulfonate (PSS), polyvinyl-sulfonic acid (PVSA) or polydimethyl-ammonium chloride (PDMDA) were used as polyelectrolytes. The final films were applied as modificators of glass slides and pyrolytic graphite (PG) electrode surfaces. 

Polychloroprene polymers also vary in the degree of branching in the polymer. Polychloroprenes with little or no branching are called sol polymers, whereas those with considerable branching are referred to as gel polymers. Sol polymers are soluble in aromatic solvents. All of the solvent-grade polychloroprene polymers (except Neoprene AG) are sol polymers. The gel content in the polychloroprene affects the cohesive strength, resilience, elongation, open tack time, resistance to permanent set, and oil swell. 

Recently, Mark and co-workers also reported on organophilic silica formed by the combination of the sol-gel procedure and water-in-oil micro-emulsion method, in which methacryloyloxypropyltrimethoxysilane was used as one component of silica matrix [8]. The size of the silica particle was controlled by the content of water and emulsifier used. The surface of the particles was effectively covered with methacryloyl. organic groups. This organophilic silica is expected to be used as a novel component of composite materials. 

Recently, interesting composite materials incorporating polymeric materials into the sol-gel glasses have been reported by Wilkes and his co-workers [9]. These materials are named ceramers . The properties of ceramers strongly depend on the reaction conditions, i.e., acidity, water content, reaction temperature, the amount of organic polymer, the molecular weight of polymer, solvent, and so on. 

Poly(arylene ether ketone) and poly(arylene ether sulfone) were also tried to be incorporated into the hybrids with silica gel by means of the sol-gel procedure [19, 20], For example, triethoxysilyl-terminated organic polymer was subjected to co-hydrolysis with tetraethoxysilane. A systematic change in mechanical and physical properties of the hybrid glass has been found with the content of organic polymer and the annealing temperatures. 

Figure 2 shows that the conversion does not depend directly on the total nitrogen content of the catalyst as it was seen before for the "AlPONs" synthesised by the sol-gel method [5]. 

Quaternary alkylammonium salts are generally water-soluble surfactants. The sol-gel-derived anion-sensing membranes encapsulating a quaternary alkylammonium salt, especially with high contents, are easy to deteriorate due to the exudation of the cationic site from the membrane to aqueous sample phases. Moreover, another issue concerning the dispersibility of ammonium salts in sol-gel-derived membranes may happen when high... 

Kamitakahara, M., Kawashita, M., Miyata, N., Kokubo, T. and Nakamura, T. (2001) Bioactivity and mechanical properties of polydimethylsiloxane (PDMS)-CaO-Si02 hybrids with different PDM S contents. Journal of Sol-Gel Science and Technology, 21, 75-81. 

Huang, H.H., Orler, B. and Wilkes, G. L. (1985) Ceramers — hybrid materials incorporating polymeric oligomeric species with inorganic glasses by a sol-gel process. 2. Effect of acid content on the final properties. Polymer Bulletin, 14, 557-564. 

---