Sliding angle

Sliding angle (a), contact angle and drop size and, 22 113-114 Sliding plate rheometer, 22 738, 740 Slightly toxic substances, 23 113... 

Rat (White) 15 d continuous 26 (mild motor disorders during the first 4 days of exposure, 4.4° decrease in sliding angle) Dalin and Kristoffersson 1974... 

Entry Refractive Index 193 nm Sliding Angle (°) Receding Contact Angle (°)... 

Figure 23.16 Schematic presentation of sessile droplet sliding angle measurement.

The effects of the composite parameter WjFM on the friction coefficient of the contact lens coated by methane plasma polymer at a fixed coating thickness 31.2nm are shown in Figure 35.3. The friction coefficient, which is the tangential force divided by the normal force, was calculated from the sliding angle of a contact lens placed on a glass plate that was coated with plasma polymer of tetrafluoroethylene (TFE). The friction coefficient of the methane plasma polymerized contact lens is independent of WjFM in the range 2.6-29.1 GJ/kg. 

Typically in the paper industry the frictional characteristics are defined by determining the slide angle at which two pieces of paper or boxes will slide over one another. A typical lab device for determining the slide angle of a paper sample is shown in Figure 12.60. 

The slide angle is read from a protractor attached to the equipment. 

The connection is broken, the incline stops moving and remains in position so the slide angle can be determined. 

Chem. Descrip. Acrylic polymer Uses Acrylic for overprint vehides, coatings Features Can be formulated as nonskid overprint vehide with consistent slide angles good adhesion to flexible substrates exc. ice-wafer crinkle resist. 

Uses Antislip agent for water-based inks and coatings Features Inc. slide angle without reducing gloss Properties Tan translucent liq. dens. 8.33 Ib/gal vise. 100 cps max. pH 8.5-9.5 nonionic 39-41% act. 

Miwa, M., Nakajima, A., Fujishima, A., Hashimoto, K., and Watanabe, T., Effects of the surface roughness on sliding angles of water droplets on superhydrophobic surfaces, Langmuir, 16, 5754, 2000. 

The measurement of sliding angles and roll-off angles at a defined drop volume of 35 pi was performed by motorized rotation of the contact angle measurement system along its horizontal axis. 

---