Size reduction, biomass conversion

Particle Size Reduction. Changes in the physical characteristics of a biomass feedstock often are requited before it can be used as a fuel. Particle size reduction (qv) is performed to prepare the material for direct fuel use, for fabrication into fuel pellets, or for a conversion process. Particle size of the biomass also is reduced to reduce its storage volume, to transport the material as a slurry or pneumatically, or to faciHtate separation of the components. 

Chapters 6 to 12 address specific groups of processes and methods employed for converting biomass to energy and fuels. In this chapter, the physical processes employed to prepare biomass for use as fuel or as a feedstock for a conversion process are discussed. The processes examined are dewatering and drying, size reduction, densification, and separation. The physical process, a few specific examples of the process, and its relationship to the thermochemical or microbial process that may be used for subsequent conversion are described. 

Reduction in physical size is often required before biomass is used as a fuel or feedstock. Size-reduction techniques are employed to prepare biomass for direct fuel use, fabrication into fuel pellets, cubes, and briquettes, or conversion. Smaller particles and pieces of biomass reduce its storage volume, facilitate handling of the material in the solid state and transport of the material as a slurry or pneumatically, and sometimes permit ready separation of components such as bark and whitewood. The size of the pieces or particles can be critical when drying is used because the exposed surface area, which is a function of physical size, can determine drying time and the methods and conditions needed to remove moisture. There are a few exceptions where size reduction is not needed, such as in whole-tree burning. 

Any improvement on thermochemical conversion of biomass ought to consider the reduction of particulate matter (PM). One has to take into account that particulates harmful to the environment in the size less than 1 micron behave like gaseous effluents. They can not be withdrawn by means of cyclones, etc. The goal of any improvement is to decrease the amount of particulates already in the thermochemical conversion. 

---