Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Silver, electrochemistry

In a prior publication, initial measurements of ket were reported for tris/cacodylate buffers of pH 6-8.5 and ionic strengths of 1-100 mM. The cytochrome c samples in those experiments had been chromatographically purified according to established procedures and then lyophilized for subsequent storage at -18 C. Solutions were then prepared directly from the lyophilized material. Since lyophilization has been shown to have very deleterious effects on the silver electrochemistry of cytochrome c and also results in the appearance of new chromatographic bands, we have repeated our earlier experiments using purified, non-lyophilized samples. [Pg.65]

Combination silver—silver salt electrodes have been used in electrochemistry. The potential of the common Ag/AgCl (saturated)—KCl (saturated) reference electrode is +0.199 V. Silver phosphate is suitable for the preparation of a reference electrode for the measurement of aqueous phosphate solutions (54). The silver—silver sulfate—sodium sulfate reference electrode has also been described (55). [Pg.92]

Because silver, gold and copper electrodes are easily activated for SERS by roughening by use of reduction-oxidation cycles, SERS has been widely applied in electrochemistry to monitor the adsorption, orientation, and reactions of molecules at those electrodes in-situ. Special cells for SERS spectroelectrochemistry have been manufactured from chemically resistant materials and with a working electrode accessible to the laser radiation. The versatility of such a cell has been demonstrated in electrochemical reactions of corrosive, moisture-sensitive materials such as oxyhalide electrolytes [4.299]. [Pg.262]

The limited anodic potential range of mercury electrodes has precluded their utility for monitoring oxidizable compounds. Accordingly, solid electrodes with extended anodic potential windows have attracted considerable analytical interest. Of the many different solid materials that can be used as working electrodes, the most often used are carbon, platinum, and gold. Silver, nickel, and copper can also be used for specific applications. A monograph by Adams (17) is highly recommended for a detailed description of solid-electrode electrochemistry. [Pg.110]

The microarray electrodes used for solid state electrochemistry are a slight variation of the transistor decribed in Sect. 5.2.2 The most appealing feature is the location of all the necessary electrodes on a single microchip, the reference electrode being provided by the application of a droplet of silver epoxy to one of the gold micro electrodes (Fig. 7). [Pg.80]

C19-0097. Electrochemistry can be used to measure electrical current in a silver coulometer, in which a silver cathode is immersed in a solution containing Ag" " ions. The cathode is weighed before and after passage of current. A silver cathode initially has a mass of 10.77 g, and its mass increases to 12.89 g after current has flowed for 15.0 minutes. Compute the quantity of charge in coulombs and the current in amperes. [Pg.1422]

Mohamed, A.A., Bruce, A.E. and Bruce, M.R.M. (1999) The electrochemistry of gold and silver complexes, in Chemistry of Organic Derivatives of Gold and Silver (ed. S. Patai), John Wiley and Sons,... [Pg.40]

The first example of an air-stable silver(III) complex of an A-confused tetraphenylporphyrin (5,10,15,20-tetraphenyl-2-aza-21-carboporphyrin argentate(III) (3)) has been described.1 3 The complex is diamagnetic and the electrochemistry shows that ring reduction or oxidation is possible. [Pg.917]

Jeanmaire D.L., Vanduyne R.P., Surface Raman spectro-electrochemistry. 1. Heterocyclic, aromatic, and aliphatic-amines adsorbed on anodized silver electrode, J. Electroanal. Chem. 1977 84 1-20. [Pg.253]

In addition to the well-known luminescent Re(NAN)(GO)3 moieties, the electrochemically active ferrocenyl groups were employed as building blocks for the construction of polynuclear silver(i) alkynyl complexes. Yip reported the synthesis, structural characterization, and electrochemistry of a tetranuclear complex, [Ag3(dppm)3(C=CFc)(OTf)]OTf 96 (Figure 43), with the Ag3(dppm)3 skeletal unit being capped by a ferrocenylethynyl ligand on one side and an OTP anion on the other, all in a /Z3-771-bonding mode.170... [Pg.230]

The authors acknowledge very helpful discussions with Dr. R. Adzic of the Institute of Electrochemistry, Belgrade, concerning the underpotential deposition of lead on single crystal silver substrates after chemical polishing. The authors also acknowledge support of the research by the U.S. Office of Naval Research. [Pg.153]

Silver-silver salt electrodes, in electrochemistry, 22 684 Silver soap(s), 19 329... [Pg.846]

Buckley, A. N., 1994. A survey of the application of X-ray photoelectron spectroscopy to flotation research. Colloids Surf, 93 159 - 172 Buckley, A. N. and Woods, R., 1995. Identifying chemisorption in the interaction of thiol collectors with sulphide minerals by XPS adsorption of xanthate on silver and silver sulphide. Colloids and Surfaces A Physicochemical and Engineering Aspects, 104,2 - 3 Buckley, A. N. and Woods, R., 1996. Relaxation of the lead-deficient sulphide surface layer on oxidized galena. Journal of Applied Electrochemistry, 26(9) 899 - 907 Buckley, A. N. and Woods, R., 1997. Chemisorption—the thermodynamically favored process in the interaction of thiol collectors with sulphide minerals. Inert. J. Miner. Process, 51 15-26... [Pg.270]

Having identified the main features of electrochemistry, the remainder of this chapter will focus on the use of electrolytic cells and will use as examples the electrodeposition (or electroplating) of metals such as copper, zinc, iron, chromium, nickel and silver. The chapter will also consider the electrochemistry of some organic molecules. Electroanalysis will not be considered since a full description is not within the scope of this chapter. Eor those interested readers, there is a review on the topic [2],... [Pg.230]

Solubility data (pA sp) for two dozen hexacyanoferrate(II) and hexacyanoferrate(III) salts, and Pourbaix (pe/pH) diagrams for iron-cyanide-water, iron-sulfide-cyanide-(hydr)oxide, iron-arsenate-cyanide-(hydr)oxide, and iron-copper-cyanide-sulfide-(hydr)oxide, are given in a review ostensibly dedicated to hydrometallurgical extraction of gold and silver. " The electrochemistry of Prussian Blue and related complexes, in the form of thin films on electrodes, has been reviewed. ... [Pg.422]

Electrochemistry of Zinc, Cadmium, Lead, Gold, Silver, Mercury, and Copper... [Pg.723]


See other pages where Silver, electrochemistry is mentioned: [Pg.539]    [Pg.539]    [Pg.554]    [Pg.218]    [Pg.208]    [Pg.353]    [Pg.916]    [Pg.101]    [Pg.125]    [Pg.229]    [Pg.282]    [Pg.290]    [Pg.846]    [Pg.305]    [Pg.29]    [Pg.84]    [Pg.311]    [Pg.704]    [Pg.723]    [Pg.723]    [Pg.839]    [Pg.840]    [Pg.844]    [Pg.846]    [Pg.848]    [Pg.850]    [Pg.852]    [Pg.854]    [Pg.856]    [Pg.858]    [Pg.860]    [Pg.862]    [Pg.864]    [Pg.866]   
See also in sourсe #XX -- [ Pg.204 , Pg.205 , Pg.212 , Pg.214 , Pg.219 , Pg.226 , Pg.236 , Pg.242 ]




SEARCH



© 2024 chempedia.info