Sieve tray extractors capacity

Siemens-Martin furnace-regenerator, 590 Sieve tray extractors, 483 capacity, 484,487 diameters, 483, 487 efliciency. 483.487 pulsed, 478,483,487 sizing example, 486 Sieve trays, 428 assembly in a tower, 428 comparison with other types, example, 431... 

The Graesser contactor takes an extreme position in the diagram. It has the highest separation efficiency (10 stages per meter) but the lowest capacity (1-2 m/h). The other extremum takes the static sieve tray extractor with only one equilibrium stage per meter and up to 50 m/h capacity. The capacity of a pulsed sieve tray column is as high as 30 m/h with a separation efficiency of 5 to 6 stages per meter. 

FIG. 23-38 Efficiency and capacity range of small-diameter extractors, 50 to 150 mm diameter. Acetone extracted from water with toluene as the disperse phase, V /V = 1.5. Code AC = agitated cell PPC = pulsed packed column PST = pulsed sieve tray RDC = rotating disk contactor PC = packed column MS = mixer-settler ST = sieve tray. (Stichlmair, Chem. Ing. Tech. 52(3), 253-255 [1980]). 

Sieve-tray towers are very effective, both with respect to liquid-handling capacity and extraction efficiency, particularly for systems of low interfacial tension which do not require mechanical agitation for good dispersion. The general assembly of plates and downspouts is much the same as for gas-liquid contact except that a weir is not required. Towers packed with the same random packing used for gas-liquid contact have also been used for liquid extractors however, mass-transfer rates are poor. It is recommended instead that sieve-tray towers be used for systems of low interfacial tension and mechanically agitated extractors for those of high interfacial tension (Treybal, 1980). 

---