Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Shear fatigue

Fig. 13. Shear fatigue fracture can be seen to occur symmetrically in the last shear band pair (rightmost pair). These partial cracks appear as the dark regions growing at 45°to the main craze dane, disjoint from the main crack... Fig. 13. Shear fatigue fracture can be seen to occur symmetrically in the last shear band pair (rightmost pair). These partial cracks appear as the dark regions growing at 45°to the main craze dane, disjoint from the main crack...
Rg. 17. Schematic diagram showing the craze-dominated DCG regions constrained on the sides and terminated in the front by shear fatigue fracture regions... [Pg.278]

Fig. 23. Schematic diagram showing shear fatigue lifetime and craze fatigue lifetime branches with a transition zone... Fig. 23. Schematic diagram showing shear fatigue lifetime and craze fatigue lifetime branches with a transition zone...
Fig. 30. Plane strain, shear fatigue fracture surface in PC. The fracture surface is oriented approximately 4S to the load direction. Fracture occurs through coalescence of voided areas within a shear band. Repnnled courtesy of MatsumotC ... Fig. 30. Plane strain, shear fatigue fracture surface in PC. The fracture surface is oriented approximately 4S to the load direction. Fracture occurs through coalescence of voided areas within a shear band. Repnnled courtesy of MatsumotC ...
ASTM C 394-62 (1988) Standard Method of Test for Shear Fatigue of Sandwich Core Materials, 2 pp (Comm F-7)... [Pg.404]

Fig. 12.32 Shear fatigue strength of swing friction stir welding. Source Ref 5... Fig. 12.32 Shear fatigue strength of swing friction stir welding. Source Ref 5...
The lap shear fatigue test for the joints of the front cab module of the Maglev Transrapid TR08 has been analyzed by a fine detail analysis with 3D solid elements using the real cross-section geometry. The adherend materials are aluminum on one side and GRP on the other see also Section 32.5.1. The PU adhesive Sikaflex -254 Booster is modeled with the Ogden strain energy equation (Eq. (1), with N=2). The computed stiffness correlates well with the test results. The local stress distribution is visualized in Fig. 32.11. [Pg.533]

Fig. 32.11 Detail FE analysis of a lap shear fatigue test, with strain = 20%. Fig. 32.11 Detail FE analysis of a lap shear fatigue test, with strain = 20%.
Aor Normal fatigue strength Axr Shear fatigue strength... [Pg.106]

Philips DC, Scott JM, Shear fatigue of unidirectional fibre composites. Composites, 8, 233-236, 1977. [Pg.743]

Aronhime J, Harel H, Gilbert A, Marom G, The rate-dependence of flexural shear fatigue and uniaxial compression of carbon-fibre and aramid-fibre composites and hybrids, Composites Sci Technol, 43(2), 105-116, 1992. [Pg.857]

Figure 17. Single-lap shear fatigue test setup. Figure 17. Single-lap shear fatigue test setup.
Perreux D, Suri C (1997) A study of the coupling between the phenomena of water absorption and damage in glass/epoxy composite pipes. Compos Sci Technol 57(9-10) 1403-1413 Phillips DC, Scott JM, Buckley N (1978) The effects of moisture on the shear fatigue of fibre composites. In Noton B, SignorelU R, Street K, Phillips L (eds) Proceedings of the 1978 international conference on composite materials (ICCM/2), Toronto, 16-20 April 1978, pp 1544-1559... [Pg.143]

The shear fatigue of UD composites of carbon, glass and aramid fibres is shown in Figure 10.25. [Pg.260]

K.-H. Kwak, J. Suh and C.-T.T. Hsu, Shear-fatigue behavior of steel fiber reinforced... [Pg.274]

See other pages where Shear fatigue is mentioned: [Pg.454]    [Pg.280]    [Pg.282]    [Pg.285]    [Pg.286]    [Pg.286]    [Pg.366]    [Pg.2320]    [Pg.254]    [Pg.339]    [Pg.109]    [Pg.494]    [Pg.7492]    [Pg.346]    [Pg.260]    [Pg.260]    [Pg.261]    [Pg.111]    [Pg.590]    [Pg.515]    [Pg.1011]   
See also in sourсe #XX -- [ Pg.260 , Pg.260 ]



SEARCH



© 2024 chempedia.info