Serie iron

In moving across the transition series, iron is the first element which fails to attain its group oxidation state (-1-8). The highest oxidation state known (so far) is 4-6 in [Fe04] and even this is extremely easily reduced. On the... 

Many of the transition and post-transition metals form more than one cation. Consider, for example, iron in Group 8. This metal forms two different series of compounds with non-metals. In one series, iron is present as a +2 cation... 

Matzanke, B. F. Miiller-Matzanke, C. Raymond, K. N. In Physical Bioinorganic Chemistry Series Iron Carriers and Iron Proteins Ed. Loehr, T. M. VCH Publishers New York, 1989, p. 3. 

Indicate the position of iron, cobalt, and nickel in Mendeleev s periodic table of the elements, the electron configurations and sizes of their atoms, and their oxidation states. Explain the observed law of the change in the characteristic oxidation states in the series iron-cobalt-nickel. Why do the elements of the iron family fail to exhibit the highest oxidation state corresponding to the number of the group in the periodic table which they belong to ... 

How does the stability of ammines change in the series iron (I I), cobalt(II), nickel(II) ... 

Matzanke BF, Miiller-Matzanke G, Raymond KN (1989) Siderophore-mediated iron transport. In Loehr TM (ed) Physical bioinorganic chemistry series iron carriers and iron proteins, VCH, pp 1-121... 

See, for example, various chapters in the series Iron-Sulfur Proteins , ed. W. Lovenberg, Academic, New York, vol. 

Application To produce aqueous formaldehyde (AF) or urea formaldehyde precondensate (UFC) from methanol using Haldor Tbpspe A/S FK-Series iron/molybdenum-oxide catalysts. Description The process is carried out in a recirculation loop at low pressure (0 to 6 psig) (1 to 1.5 bar abs). Vaporized methanol is mixed with air and recycle gas that were boosted by the blower (1). The mixture may be preheated to about 480°F (250°C) in the optional heat exchanger (2) or it may be sent directly to the reactor (3). In the reactor, methanol and oxygen react in the catalyst-filled tubes to make formaldehyde. Reaction heat is removed by an oil heat transfer medium (HTM). The reacted gas exits the reactor at approximately 540°F (290°C) and is cooled in the LP steam boiler (4) to 260°F (130°C) before entering the absorber (5). In the absorber, the formaldehyde is absorbed in water or urea solution. Heat is removed by one or two cooling circuits (6, 7). From the lower circuit (6)... 

Marchetti, A., and Harrison, P. (2004). Effects of iron limitation on the elemental composition ratios of Pseudo-nitzschia, a dominant marine diatom during the SERIES iron enrichment experiment ASLO/TOS Ocean Research Conference. ASLO/TOS, Honolulu, HI. p. 100. 

Would you expect zinc to reduce cadmium ion (Refer to the electromp-tive-force series.) Iron to reduce mercuric ion Zinc to reduce lead ion Potassium to reduce magnesium ion ... 

Figure 3.22 shows a schematic of the Haldor-Topsoe A/S Formaldehyde Process. The process starting material is methanol and the catalyst used is Haldor Topsoe A/S FK-series iron/molybdenum-oxide catalysts [9]. The process is carried out in a recirculation loop at near atmospheric pressure (I—... 

The accelerated aging test is adopted for most of the solid catalyst used in heterogeneous catal3dic reaction. For example, the test conditions of heat-resistant stability for China s AllO series, A2 series and A3 series iron catalyst are at 5 MPa, 30,000h and 500°C hold for 20h, the loss of the ammonia concentration of the reactor outlet is not higher than 0.5%, while literature was to evaluate the stability by the reducing degree of activity at 600°C hold for 16 h. 

---