Sequential solutions enthalpy equations

The essential differences between sequential-modular and equation-oriented simulators are ia the stmcture of the computer programs (5) and ia the computer time that is required ia getting the solution to a problem. In sequential-modular simulators, at the top level, the executive program accepts iaput data, determines the dow-sheet topology, and derives and controls the calculation sequence for the unit operations ia the dow sheet. The executive then passes control to the unit operations level for the execution of each module. Here, specialized procedures for the unit operations Hbrary calculate mass and energy balances for a particular unit. FiaaHy, the executive and the unit operations level make frequent calls to the physical properties Hbrary level for the routine tasks, enthalpy calculations, and calculations of phase equiHbria and other stream properties. The bottom layer is usually transparent to the user, although it may take 60 to 80% of the calculation efforts. 

As is true in the design of many separation techniques, the choice of specified design variables controls the choice of the design method. For the flash chamber, we can use either a sequential solution method or a simultaneous solution method. In the sequential procedure, we solve the mass balances and equilibrium relationships first and then solve the energy balances and enthalpy equations. In the simultaneous solution method, all equations must be solved at the same time. In both cases, we solve for flow rates, compositions, and temperatures before we size the flash drum. 

In the sequential solution procedure, we first solve the mass balance and equilibrium relationships, and then we solve the energy balance and enthalpy equations. In other words, the two sets of equations are uncoupled. The sequential solution procedure is applicable when the last degree of freedom is used to specify a variable that relates to the conditions in the flash drum Possible choices are ... 

If the temperature of the feed to the drum, Tp, is the specified variable, the mass and energy balances and the equilibrium equations must be solved simultaneously. You can see from the energy balance, Eq. (2-7 why this is true. The feed enthalpy, hp, can be calculated, but the vapor and liquid enthalpies, and depend upon x, which are unknown. Thus a sequential solution is not possible. 

---