Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Selenium physical properties

The physical properties of the Selenium also offer big advantages with respect to radiation shielding and beam collimation. Within the comparison of radiation isodose areas the required area-radius for a survey of 40pSv/h result in a shut off area that is for Selenium only half the size as for iridium. Sources of similar activity and collimators of same absorbtion value (95%) have been used to obtain values as mentioned in Table 3 below. [Pg.425]

Inorganic Compounds. Inorganic selenium compounds are similar to those of sulfur and tellurium. The most important inorganic compounds are the selenides, haUdes, oxides, and oxyacids. Selenium oxidation states are —2, 0, +1, +2, +4, and +6. Detailed descriptions of the compounds, techniques, and methods of preparation, and references to original work are available (1—3,5,6—10, 51—54). Some important physical properties of inorganic selenium compounds are Hsted in Table 3. [Pg.331]

Table 3. Physical Properties of Inorganic Selenium Compounds ... Table 3. Physical Properties of Inorganic Selenium Compounds ...
Table 16.2 Some atomic and physical properties of selenium, tellurium and polonium... Table 16.2 Some atomic and physical properties of selenium, tellurium and polonium...
Oxohalides and pseudohalides Table 16.7 Some physical properties of selenium oxohalides... [Pg.777]

Basic physical properties of sulfur, selenium, and tellurium are indicated in Table 1.3. Downward the sulfur sub-group, the metallic character increases from sulfur to polonium, so that whereas there exist various non-metallic allotropic states of elementary sulfur, only one allotropic form of selenium is (semi)metallic, and the (semi)metallic form of tellurium is the most common for this element. Polonium is a typical metal. Physically, this trend is reflected in the electrical properties of the elements oxygen and sulfur are insulators, selenium and tellurium behave as semiconductors, and polonium is a typical metallic conductor. The temperature coefficient of resistivity for S, Se, and Te is negative, which is usually considered... [Pg.7]

Table 1.3 Some physical properties of sulfur, selenium, and tellurium... Table 1.3 Some physical properties of sulfur, selenium, and tellurium...
Extensive structural, optical, and electronic studies on the chalcopyrite semiconductors have been stimulated by the promising photovoltaic and photoelectrochem-ical properties of the copper-indium diselenide, CuInSe2, having a direct gap of about 1.0 eV, viz. close to optimal for terrestrial photovoltaics, and a high absorption coefficient which exceeds 10 cm . The physical properties of this and the other compounds of the family can be modulated to some extent by a slight deviation from stoichiometry. Thus, both anion and cation deficiencies may be tolerated, inducing, respectively, n- and p-type conductivities a p-type behavior would associate to either selenium excess or copper deficiency. [Pg.43]

Handbook of Soil Conditioners Substances That Enhance the Physical Properties of Soil, edited by Arthur Wallace and Richard E. Terry Environmental Chemistry of Selenium, edited by William T. Frankenberger, Jr., and Richard A. Engberg... [Pg.431]

The coating chamber was equipped with a set of independently controlled stainless steel boats and a shutter system to enable the fabrication of multilayer structures. Pure selenium pellets were loaded into one boat and As Sei alloys into another. The two sources were evaporated sequentially (without breaking the vacuum) at boat temperatures of about 450 K. Typical coating rates were l j,m/min. After evaporation, they were allowed to anneal over several weeks in the dark at room temperature. During this period, due to structural bulk relaxation, most physical properties of the photoconductor film become stabilized. The compositions of the deposited films were determined by electron probe microanalysis, and the compositions quoted (0 < X < 0.20) are accurate to within 0.5 at.%. By shuttering the beginning and the end of the evaporation, a uniform arsenic composition across the film thickness can be obtained. In all experiments, a transparent gold electrode ( 300 jm thick) was used as the top contact. [Pg.67]

It has been shown 6 that when various rubbers are treated with the oxychloride, their physical properties are changed and they become amorphous powders, insoluble in the ordinary solvents for rubber. According to Frick the behaviour towards selenium oxychloride... [Pg.323]

Physical Properties.—Tellurium is known in amorphous and crystalline forms, but it appears to differ from sulphur and selenium in... [Pg.352]

Occurrence, Extraction and Purification—The Allotropy of Selenium—Colloidal Selenium—General Physical Properties of Selenium—Chemical Properties— Applications of Element—Physiological Action—Atomic Woighl—Valency— Constitution of Selenium Molecule—Detection and Estimation of Selenium. [Pg.437]

The elementary substances selenium and tellurium differ from sulfur in their physical properties in w ays expected from their relative positions in the periodic table. Then melting points, boiling points, and densities are higher, as shown in Table 17-1. [Pg.375]

The 1 1 chlorine trifluoride-platinum pentafluoride adduct, m. p. I7l , and the 1 1 iodine pentafluoride adduct, m. p. 140° resemble, in their physical properties, the selenium tetrafluoride adducts of osmium pentafluoride (SeF4,OsFg, m. p. 158°) and iridium pentafluoride (SeF. IrFg, m. p. 133°). They are probably bifluorine-bridged monomers ... [Pg.266]


See other pages where Selenium physical properties is mentioned: [Pg.326]    [Pg.173]    [Pg.784]    [Pg.87]    [Pg.129]    [Pg.514]    [Pg.623]    [Pg.664]    [Pg.828]    [Pg.924]    [Pg.924]    [Pg.703]    [Pg.326]    [Pg.336]    [Pg.97]    [Pg.104]    [Pg.384]    [Pg.1431]    [Pg.296]    [Pg.176]    [Pg.137]    [Pg.138]    [Pg.136]    [Pg.458]    [Pg.4]    [Pg.6]    [Pg.141]    [Pg.1051]    [Pg.21]   
See also in sourсe #XX -- [ Pg.353 ]

See also in sourсe #XX -- [ Pg.435 , Pg.877 , Pg.879 , Pg.881 , Pg.883 , Pg.884 ]

See also in sourсe #XX -- [ Pg.134 ]

See also in sourсe #XX -- [ Pg.134 ]

See also in sourсe #XX -- [ Pg.43 , Pg.493 , Pg.1013 , Pg.1015 , Pg.1017 , Pg.1019 , Pg.1020 , Pg.1021 ]

See also in sourсe #XX -- [ Pg.1061 ]

See also in sourсe #XX -- [ Pg.44 , Pg.549 , Pg.1126 , Pg.1128 , Pg.1130 , Pg.1132 , Pg.1133 , Pg.1134 ]

See also in sourсe #XX -- [ Pg.123 ]




SEARCH



Selenium properties

© 2026 chempedia.info