Selective detergency

Criteria for detergent selection Detergent should solubilize but not denature the protein Detergent should be readily available in pure form... 

A fundamental part of protein extraction is solubilization. Without some form of fractionation or enrichment processing step, several proteins tend to be underrepresented in datasets. Even with specialized membrane protein selective detergents, some form of bias may occur, as the abundance of these... 

Emulsifiers. Removing the remover is just as important as removing the finish. For water rinse removers, a detergent that is compatible with the remover formula must be selected. Many organic solvents used in removers are not water soluble, so emulsifiers are often added (see Emulsions). Anionic types such as alkyl aryl sulfonates or tolyl fatty acid salts are used. In other appHcations, nonionic surfactants are preferred and hydrophilic—lipophilic balance is an important consideration. 

A detergent that is compatible with the remover formula must be developed for water rinse removers. Anionic or nonionic surfactants should be selected, depending on the pH and intended application of the remover. 

To date (ca 1996) many potentially usefiil sucrose derivatives have been synthesized. However, the economics and complexities of sucrochemical syntheses and the avadabiLity of cheaper substitutes have limited their acceptance hence, only a few of them are in commercial use. A change in the price and availability of petroleum feedstocks could reverse this trend. Additional impetus may come from regioselective, site-specific modifications of sucrose to produce derivatives to facilitate and improve the economics of sucrochemical syntheses. For example, the microbe yigwbacterium tumifaciens selectively oxidizes sucrose to a three-keto derivative, a precursor of alkylated sucroses for detergent use (50). Similarly, enzymes have been used for selective synthesis of specific sucrose derivatives (21). 

In some cases, a mixture of natural petroleum feedstock is preblended with synthetic alkylated aromatics, such as detergent aromatic alkylate bottoms or with first-intent synthetic mono- or dialkylated aromatics, selected to provide a suitable molecular weight for cosulfonation and subsequent processing. The use of blended feedstocks may eliminate the need for conducting an oil extraction—concentrating step, particularly for a typical 40% Ca or Mg petroleum sulfonated product. 

Amino Alcohols. Reaction of chloroformate is much more rapid at the amino group than at the hydroxyl group (4—8). Thus the hydroxy carbamates, which can be cyclized with base to yield 2-oxazoHdones, can be selectively prepared (29). Nonionic detergents may be prepared from poly[(ethylene glycol) bis(chloroformates)] and long-chain tertiary amino alcohols (30). 

Elastomeric Fibers. Elastomeric fibers are polyurethanes combiaed with other nonelastic fibers to produce fabrics with controlled elasticity (see Fibers, elastomeric). Processing chemicals must be carefully selected to protect all fibers present ia the blend. Prior to scouriag, the fabrics are normally steamed to relax uneven tensions placed on the fibers duriag weaving. Scouriag, which is used to remove lubricants and siting, is normally conducted with aqueous solutions of synthetic detergents and tetrasodium pyrophosphate, with aqueous emulsions of perchloroethylene or with mineral spidts and sodium pyrophosphate. 

Tailing peaks or longer than expected elution volumes are sometimes caused by low solubility of the protein in the mobile phase. Using a trial-and-error process, select the proper pFf and ionic strength to address this problem. Detergents such as sodium dodecyl sulfate (SDS) are sometimes helpful but, because they change the conformation of many proteins and are difficult to remove from the column should be used only if other methods fail. 

In the development of a SE-HPLC method the variables that may be manipulated and optimized are the column (matrix type, particle and pore size, and physical dimension), buffer system (type and ionic strength), pH, and solubility additives (e.g., organic solvents, detergents). Once a column and mobile phase system have been selected the system parameters of protein load (amount of material and volume) and flow rate should also be optimized. A beneficial approach to the development of a SE-HPLC method is to optimize the multiple variables by the use of statistical experimental design. Also, information about the physical and chemical properties such as pH or ionic strength, solubility, and especially conditions that promote aggregation can be applied to the development of a SE-HPLC assay. Typical problems encountered during the development of a SE-HPLC assay are protein insolubility and column stationary phase... 

Transesterification of fat triglycerides is the predominant method for manufacture of mixed fatty acid methyl esters, and direct esterification of fatty acids (FA) is practiced if very selective cuts of product, in general as an intermediate detergent range alcohol, are desired. Methyl cocoate is a mobile, oily liquid above 25 °C with a yellow tint and a characteristic fatty pungent odor. FAME sulfonation to FAMES is technically possible but been rarely applied up to now (1990) (Table 13). 

---