Selecting the Location

The company had taken over an empty industrial building. A section of the building close to the production area was chosen for the laboratory. Communication would be easy and interference from heat, noise, fumes, and vibration was judged negligible. This area had no utility connections, however, so another area closer to utilities had also been considered but was dismissed as being too far away from both office and production areas. Since utilities were 

---

This section will describe general features of airflow patterns and then present information on the dimensions and locations of recirculating (stagnant) zones around the building envelope, which determine wind pressures and contaminant dilution. This knowledge allows one to select the locations of stacks and air intakes and to calculate infiltration and natural ventilation rates. 

Select the location of cathodic-protection test stations. 

The helidecks of offshore facilities are usually provided at the highest portion of the offshore installation for avoidance of obstructions during aircraft maneuvering and available space. As a result the roof of the accommodation is typically selected. The location also facilitates evacuation of personnel from installation by helicopter due to its proximity to the highest concentration of personnel. This enhances one of the avenues of escape from the installation but also exposes the accommodation to several hazards. The accommodation becomes subject to the hazards of helicopter crashes, fuel spillages, and incidental helicopter fuel storage and transfer facilities. 

In the coordinate discretization process one selects the node points in the domain at which the values of the unknown dependent variables are to be computed. In the finite volume method one also selects the location of the grid cell surfaces at which the property fluxes are determined. In this way the computational domain is sub-divided into a number of smaller, nonoverlapping sub-domains. There are many variants of the distribution of the computational node points and grid cell surfaces within the solution domain. The grid arrangements associated with the finite volume discretization of the momentum equation are generally more complicated than the one employed for a scalar transport equation. 

Selecting the location of apparel manufacturing plants using neural networks... 

Ideker RE, Wolf PD, Alfemess C, Krassowska W, Smith WM. Current concepts for selecting the location, size and shape of defibrillation electrodes. Pacing Clin Electrophysiol 1991 14 227 0. 

In selecting the location of saddle supports it is preferable to make dimension A less than dimension R in order to take advantage of the stiffening effect of the head. Dimension A is often selected so that A — OAR. Dimension A should never racceed 20% of dimension L otherwise the stresses resulting from cantilever action will be excessive. 

When selecting the location for a computer, consider where the computer will be the happiest, not necessarily the most convenient location for the users. 

A high degree of freedom in selecting the location of a floating NPP the possibility of mooring in many coastal regions of the world independent of their seismicity. 

Selecting the locations for crossover and mutation (parent locations) according to a probability distribution either uniform or skewed towards locations at which the objective function takes high values (the latter being a probabilistic expression of the survival-of-the-fittest principle). 

Once the frames are divided into 8x8 macro blocks, the block of interest is selected to determine the position of the 8x8 small macro block using the coordinate (x, y) where x represents the column and y represents row. The coordinate for both of the frames (current frame and subsequent frame) are the same to analysis the changes that occurs in the pixels values, i.e. if frame 1 block of interest is located at (10,2), then the subsequent frame such as frame 10 block of interest is located at (10,2). Equation (1) is used to select the location of the desired block of interest. 

For practical purposes, a robust and stable reference electrode must be selected. The location of the test probe and the reference electrode may be critical to the provision of reliable information and require careful consideration. High-impedance voltmeters (> 1 megohm) should be used to record potentials, in combination with a chart recorder. 

Carefully select the location of the gate and ej ector pins. 

---