Segmented flow field

Gasket Anode Printed Circuit Board Segmented Flow-Field Current Collector... 

The experiment with segmented flow field clearly demonstrates that the segments located far from the channel inlet exhibit a striking feature their individual I-V curves are S shaped. Simple extension of the model above enables us to explain the effect. 

Recently, Mench and Wang [19] used specially built segmented flow fields with serpentine flow channels for both the anode and cathode sides, where the individual segments were separately controlled by a multichannel potentiostat/galvanostat. The segmented flow fields were fabricated by embedding gold-plated stainless steel ribs in a polycarbonate block. The... 

The same effect happens inside a random flight chain where the close proximity of the polymer segments offers mutual screening from the bulk flow field. The idea of a chain being non-drained was first considered by Debye Bueche who introduced the concept of a shielding length defined as [46] ... 

A comparison with Burchard s first cumulant calculations shows qualitative agreement, in particular with respect to the position of the minimum. Quantitatively, however, important differences are obvious. Both the sharpness as well as the amplitude of the phenomenon are underestimated. These deviations may originate from an overestimation of the hydrodynamic interaction between segments. Since a star of high f internally compromises a semi-dilute solution, the back-flow field of solvent molecules will be partly screened [40,117]. Thus, the effects of hydrodynamic interaction, which in general eases the renormalization effects owing to S(Q) [152], are expected to be weaker than assumed in the cumulant calculations and thus the minimum should be more pronounced than calculated. Furthermore, since for Gaussian chains the relaxation rate decreases... 

Thurston, G.B., Peterlin,A, Influence of finite numbers of chain segments, hydro-dynamic interaction, and internal viscosity on intrinsic birefringence and viscosity of polymer solutions in an oscillating laminar flow field. J. Chem. Phys. 46, 4881-4885 (1967). 

P 62] A Lagrangian particle tracking technique, i.e. the computation of trajectories of massless tracer particles, which allows the computation of interfacial stretching factors, was coupled to CFD simulation [47]. Some calculations concerning the residence time distribution were also performed. A constant, uniform velocity and pressure were applied at the inlet and outlet, respectively. The existence of a fully developed flow without any noticeable effect of the inlet and outlet boundaries was assured by inspection of the computed flow fields obtained in the third mixer segment for all Reynolds numbers under study. 

The flow equalizing intersegmental pressure also has an effect on the flow profiles in the open segment. The flow field in the open segment may be affected strongly by... 

One of the simple ways to achieve active mixing is to induce a pressure field disturbance. Active micromixers relying on this strategy have been reported from different authors [43, 156-159], Deshmuck et al. [156, 157] proposed a T-junction microfluidic chip with an integrated micropump that alternatively drives and stops the flow within the microdevice to create a segmented flow. 

---