Seed cleaning

The minimum cost of feed pellets of seed cleanings is 40/T or 2.67/MBTU. Fuel pellets of bark are selling for 38/T delivered, 2.24/MBTU the sale price is close to our cost shown above. Direct cost of gathering and bringing field and forest residues to some point where they can be processed is between 1.50 and 2.40/MBTU. It appears that we must concentrate on the lower cost mill residues and wait for market changes to stimulate collection and densification of field and forest residues for industry. 

In addition, THC-containing foods, i.e., hemp oil, beer, and other products, are commercially available for oral consumption. Hemp oil is produced from cannabis seed and is an excellent source of essential amino acids and omega-linoleic and linolenic fatty acids. THC content is dependent upon the effectiveness of cannabis seed cleaning and oil filtration processes. Hemp oil of greater than 300 pg THC/g was available in the U.S. and up to 1,500 pg THC/g in Europe. Currently, hemp oil THC concentrations in the U.S. are low, reflecting the efforts of manufacturers to reduce the amount of THC in hemp oil products. 

The runs quenched by switching out power supply and temperature fall down to 100°C during 1 minute and in the same time the pressure decreased by intensifier to 300 MPa. After quenching the bomb cooled down to room temperature, pressure decreased to atmospheric and bomb opened. Capsules checked for hermetic, opened and quarts seed cleaned by water, dried, and fixed by Canadian balsam inside glass tubes. The tubes were cut on 5-7 discs with 0.6-0.7 mm thickness and each ones was two side polished (0.5 mm thickness after). 

The magnetic powder may consist of a mixture of ferric and ferrous oxides with 20% mineral oil, which helps to bind the composition and increase its stickiness. The efficiency of the seed cleaning is improved by the addition of milled talc to the composition. It was found in [347] that the degree of cleaning... 

---