Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Rubber and Plastic Hoses

DIN EN 12115 [468] establishes the specifications for rubber and plastic hoses for iiquid and gaseous chemicais. Their aging is investigated according to ISO 188 [454] at 70°C for seven days. A 15% change in tensile strength and a maximum of 20% change in strain at break are acceptable. [Pg.271]

Ensuring resistance to the chemicals to be transported is the user s responsibility. The supplement to DIN EN 12115 contains specifications regarding the resistance of the materials group typically used for inside layers of hoses, see Section 5.5. [Pg.272]

This Section wiii present the stabilization of polymers, because this topic is inseparable from the topic of degradation, above all in the area of thermal-oxidative and light-induced degradation. The chemical structure of stabilizers and their reaction mechanisms will not be presented - at least not in detail. For details on these topics please refer to the literature [38], [186], [518], [519], [520], [521], [522], [523] as well as [524]. [Pg.276]

ISO 13774 1998 Rubber and plastics hoses for fuels for internal combustion engines -Method of test for flammability... [Pg.179]

ISO 6802 1991 Rubber and plastics hose and hose assemblies with wire reinforcements -Hydraulic impulse test with flexing... [Pg.789]

EN/ISO 4080 Rubber and plastic hoses and hose lines - determination of gas permeability 4/95... [Pg.180]

GASKETS, PACKING, AND SEALING DEVICESAND RUBBER AND PLASTICS HOSE AND BELTING... [Pg.484]

ISO 4080 (1991). Rubber and plastics hoses and hose assemblies Determination of permeability to gas. [Pg.759]

ISO 8308 (1993), Rubber and plastic hoses and tubing Determination of transmission of liquids through hose and tubing walls. [Pg.760]

Gas welding equipment - rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of450 bar... [Pg.248]

ISO 8580 [345] Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in color, appearance and other physical properties... [Pg.246]

Rubber and plastics hoses - Assessment of ozone resistance under static conditions, 2006... [Pg.1371]

See other pages where Rubber and Plastic Hoses is mentioned: [Pg.1063]    [Pg.55]    [Pg.219]    [Pg.55]    [Pg.27]    [Pg.32]    [Pg.484]    [Pg.484]    [Pg.74]    [Pg.142]    [Pg.271]    [Pg.488]   


SEARCH



Hose, hoses

Hoses

Plasticizers and rubber

Rubber hoses

Rubber plastics

© 2024 chempedia.info