Rhodium alloys nitrate

Nitric acid reacts with all metals except gold, iridium, platinum, rhodium, tantalum, titanium, and certain alloys. It reacts violentiy with sodium and potassium to produce nitrogen. Most metals are converted iato nitrates arsenic, antimony, and tin form oxides. Chrome, iron, and aluminum readily dissolve ia dilute nitric acid but with concentrated acid form a metal oxide layer that passivates the metal, ie, prevents further reaction. 

Detection of Ruthenium in Platinum Alloys.—In order to detect the presence of ruthenium in platinum alloys, a portion of the alloy is fused with lead. The melt is extracted with nitric acid and the residue ignited in contact with air in order to volatilise the osmium. The mass may now contain platinum, iridium, rhodium and ruthenium, and is fused with potassium nitrate and hydroxide. The whole is dissolved in water, treated with excess of nitric acid and allowed to stand in a flask covered with filter-paper. In a few hours (12-24) the filter-paper darkens if ruthenium is present, in consequence of the evolution of vapour of its tetroxide. To confirm the presence of ruthenium, the paper is ignited and the ash fused with potassium nitrate and hydroxide. On extraction with water the orange colour of potassium ruthenate is obtained.1... 

At present, the main industrial catalyst of ammonia oxidation is platinum and its alloys with aluminium and rhodium. Taking into account the deficit and high cost of platinum metals, the dcCTcasing of the consumption and losses of platinum metals is an urgent problem. Therefore, several compositions of complex oxide catalysts have been developed with iron (111), cobalt and chromium oxides as an active component. Complex oxides with perovskite structure are used as new catalysts they provide selective oxidation of ammonia with an yield not less than 90 %. The authors of [33] proposed to use perovskite powders LaMeOj, where Me=Fe, Co, Ni, Cr, Mn, and La,.,Sr,Me03, where Me=Co, Mn and x=0.25-0.75. To prepare these compounds, they used the precipitation by tetraethyl ammonia from diluted nitrate solutions taken at necessary ratios. The powders as prepared are poorly molded as in the form of honeycomb stractures as well as in the form of simple granules. 

Nickel and iron salts. Attacks by aqua regia, fused nitrates, cyanides, chlorides at >1000°C. Alloys with gold, silver, and other metals Fused samples contaminated with the metal rhodium to increase hardness. Platinum cmcibles for fusions and treatment with HF Ni and Fe crucibles used for peroxide fusions... 

---