Resins ultralow-density polyethylene

PS PSF PSU PTFE PU PUR PVA PVAL PVB PVC PVCA PVDA PVDC PVDF PVF PVOH SAN SB SBC SBR SMA SMC TA TDI TEFE TPA UF ULDPE UP UR VLDPE ZNC Polystyrene Polysulfone (also PSU) Polysulfone (also PSF) Polytetrafluoroethylene Polyurethane Polyurethane Poly(vinyl acetate) Poly(vinyl alcohol) poly(vinyl butyrate) Poly(vinyl chloride) Poly(vinyl chloride-acetate) Poly(vinylidene acetate) Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinyl fluoride) Poly(vinyl alcohol) Styrene-acrylonitrile copolymer Styrene-butadiene copolymer Styrene block copolymer Styrene butadiene rubber Styrene-maleic anhydride (also SMC) Styrene-maleic anhydride (also SMA) Terephthalic acid (also TPA) Toluene diisocyanate Ethylene-tetrafluoroethylene copolymer Terephthalic acid (also TA) Urea formaldehyde Ultralow-density polyethylene Unsaturated polyester resin Urethane Very low-density polyethylene Ziegler-Natta catalyst... 

Very low density polyethylenes are a subset of linear low density polyethylene in which the comonomer content is so high that crystallization is largely suppressed. Such materials are also known as ultralow density polyethylene or plastomers. The limited crystallinity of these resins results in low levels of stiffness and high clarity. These materials are used where transparency, softness, strain recovery, and toughness are at a premium such applications include medical tubing, meat packaging, and diaper backing. 

Two important types of elastomeric polyolefin blends are reactor-made iPP/ EPR blends and postreactor blend iPP/EPDM. The latter is called thermoplastic vulcanizates (TPVs), produced by dynamic vulcanization of blends containing a thermoplastic and an elastomer. To make iPP/EPDM TPV, the two polymers PP and EPDM are mixed with curatives, such as peroxides, phenolic resins, or sulfur with accelerators, and dynamically cured in an extmder resulting in a blend consisting of micrometer-sized elastomer particles dispersed in the PP matrix (20-24). Paraffinic oils are added in the melt mixing process for viscosity control and cost. In iPP/ EPDM TPV, the crystalline iPP resin is normally the minor phase. Recently, polyolefin plastomers have been added to the class of elastomeric polyolefin blends. Polyolefin plastomers are ultralow molecular weight linear low density polyethylenes (ULMW-LLDPE). Nonelastomeric polyolefin blends are blends of polyolefins with mostly nonpolyolefin (other thermoplastic) matrices as mentioned earlier. 

The incorporation of extremely high levels of comonomer can reduce the degree of crystallinity, and hence the resin density, to levels well below that of low density polyethylene. Such products are variously termed ultralow density or very low density polyethylene (ULDPE and VLDPE, respectively). These materials are flexible, clear, and elastomeric. They can be used neat or blended into other polymers as impact strength and clarity modifiers. 

---

See also in sourсe #XX -- [ , ]

---