Residual circuit force

We are now in a position to test with our analog circuit the predictions of the AEP concerning the Itd-Stratonovich controversy. We believe that inertia and a weak residual circuit force have similar efifects, so that some caution is need in interpreting the predictions of the AEP. 

The Home Appliances Recycling Law came into full force in 2001 and is to be revised within a few years. In such processes, not only the plastic cases, but also printed circuit boards are recycled, the Law for Recycling End-of-Life Vehicles passed through the Parliament, 2002. Clearly this law should promote the recycling of automotive shredder residue. 

Electrically conductive adhesives, primarily silver-filled epoxies, are finding uses as replacements for solder in surface-mounting components on printed-circuit boards and in flip-chip attachments. There are several driving forces for this application, a major one being the trend to eliminate lead and tin-lead solders because they may be health hazards. Also associated with the use of solder, is the need to eliminate ozone-depleting solvents presently used to clean and remove flux residues. Electrically conductive polymer... 

In emergency situations, residual heat is transferred by natural circulation of the coolant in the reactor tank and in the secondary circuit (in case of a blackout). Heat is removed from the secondary circuit convectors using the air system for emergency cooldown (ASEC) under forced or natural circulation of air in the convector compartments. Direct-acting devices open air louvers of the ASEC passively. 

---