Redox reactions in nonaqueous

The analytical chemistry of redox reactions in nonaqueous solvents has received less attention than acid-base reactions in these solvents. It should be a fruitful subject for future study. Thus far the Karl Fischer titration for water has been the most... 

Copper(II) and cerium(IV) have been studied as oxidants in acetonitrile. The copper(II)-copper(I) couple has an estimated electrode potential of 0.68 V relative to the silver reference electrode. It has been studied as an oxidant for substances such as iodide, hydroquinone, thiourea, potassium ethyl xanthate, diphenylbenzidine, and ferrocene. Cerium(IV) reactions are catalyzed by acetate ion. Copper(I) is a suitable reductant for chromium(VI), vanadium(V), cerium(IV), and manganese(VII) in the presence of iron(III). For details on many studies of redox reactions in nonaqueous solvents, the reader is referred to the summary by Kratochvil. ... 

Mu XH, Kadish KM (1990) Applications of thin-layer FTIR, UV-vis, and ESR spectroelectrochemistry for evaluating (TPP)Ru(CO) redox reactions in nonaqueous media. Langmuir 6 51-56... 

Polyimides have excellent dielectric strength and a low dielectric constant, but in certain electrolyte solutions they can electrochemically transport electronic and ionic charge. Haushalter and Krause (5) first reported that Kapton polyimide films derived from 1,2,4,5-pyromellitic dianhydride (PMDA) and 4,4 -oxydianiline (ODA) undergo reversible reduction/oxidation (redox) reactions in electrolyte solutions. Mazur et al., (6) presented a detailed study of the electrochemical properties of chemically imidized aromatic PMDA- derived polyimides and model compounds in nonaqueous solutions. Thin films of thermally... 

For metal carbonyls, redox reactions (see Redox Properties Processes) have been studied in a smaller number of cases, relative to substitution reactions. The simplicity of binary metal carbonyls and the possibility for these compounds to undergo electron transfers make them excellent substrates for studying redox processes in nonaqueous media. Convenient organometallic one-electron oxidants or reductants (number of valence electrons in parenthesis) are " V(CO)e... 

Most titrations are carried out in aqueous solution, including all those described above. In some circumstances, however, it is advantageous to use other solvents, especially organic solvents. Such nonaqueous titrations are normally used for acid-base reactions, but redox reactions may also be applicable. The Karl-Fischer titration of water, in particular, is based upon redox reactions in a nonaqueous medium. 

Vn. Redox Reactions in the Oil/Water System Accompanied by Protonation of Acceptor in the Nonaqueous Phase... 

Water is involved in most of the photodecomposition reactions. Hence, nonaqueous electrolytes such as methanol, ethanol, N,N-d i methyl forma mide, acetonitrile, propylene carbonate, ethylene glycol, tetrahydrofuran, nitromethane, benzonitrile, and molten salts such as A1C13-butyl pyridium chloride are chosen. The efficiency of early cells prepared with nonaqueous solvents such as methanol and acetonitrile were low because of the high resistivity of the electrolyte, limited solubility of the redox species, and poor bulk and surface properties of the semiconductor. Recently, reasonably efficient and fairly stable cells have been prepared with nonaqueous electrolytes with a proper design of the electrolyte redox couple and by careful control of the material and surface properties [7], Results with single-crystal semiconductor electrodes can be obtained from table 2 in Ref. 15. Unfortunately, the efficiencies and stabilities achieved cannot justify the use of singlecrystal materials. Table 2 in Ref. 15 summarizes the results of liquid junction solar cells prepared with polycrystalline and thin-film semiconductors [15]. As can be seen the efficiencies are fair. Thin films provide several advantages over bulk materials. Despite these possibilities, the actual efficiencies of solid-state polycrystalline thin-film PV solar cells exceed those obtained with electrochemical PV cells [22,23]. 

Stability and Reactivity in Nonaqueous Media Walton, R. A., Ligand-Induced Redox Reactions of Low Oxidation State 16 1... 

Platinum electrodes are widely used as an inert electrode in redox reactions because the metal is most stable in aqueous and nonaqueous solutions in the absence of complexing agents, as well as because of its electrocatalytic activity. The inertness of the metal does not mean that no surface layers are formed. The true doublelayer (ideal polarized electrode) behavior is limited to ca. 200-300 mV potential interval depending on the crystal structure and the actual state of the metal surface, while at low and high potentials, hydrogen and oxygen adsorption (oxide formation) respectively, occur. 

Photocorrosion can be prevented by adding a redox couple to the electrolyte whose potential is more favourable than the decomposition potential such that the redox reaction occurs preferentially. When n-CdS is used as photoanode in aqueous electrolytes, the electrode is photocorroded since the reaction, CdS -1- 2h - S -1- Cd, occurs readily. By adding NaOH and sodium polysuphide to the electrolyte (Ellis et al, 1976), photocorrosion is prevented. The /S redox couple preferentially scavenges the photoholes. At the anode, sulphide is oxidized to polysulphide (free sulphur) and free sulphur is reduced back at the dark cathode. Similarly n-Si anodes have been stabilized by using a nonaqueous electrolyte containing a ferricinium/ferrocene redox couple (Legg et al, 1977 Chao et al, 1983). Unfortunately, a similar stabilization technique cannot be applied to photoelectrolysis cells. Some examples of electrode... 

Almost all of the reactions that the practicing inotganic chemist observes in the laboratory take place in solution. Although water is the best-known solvent, it is not the only one of importance to the chemist. The organic chemist often uses nonpolar solvents sud) as carbon tetrachloride and benzene to dissolve nonpolar compounds. These are also of interest to Ihe inoiganic chemist and, in addition, polar solvents such as liquid ammonia, sulfuric acid, glacial acetic acid, sulfur dioxide, and various nonmctal halides have been studied extensively. The study of solution chemistry is intimately connected with acid-base theory, and the separation of this material into a separate chapter is merely a matter of convenience. For example, nonaqueous solvents are often interpreted in terms of the solvent system concept, the formation of solvates involve acid-base interactions, and even redox reactions may be included within the (Jsanovich definition of acid-base reactions. 

The only reactions that do occur with these metalloporphyrins follow oxidations of the metals or the porphyrin in rings. They have been known for a long time and summarized in reviews on the primary redox processes of metalloporphyrins [292, 293] or electrochemistry in nonaqueous media [294]. 

Standard Reduction Electrode Potentials for Inorganic Systems in Nonaqueous Solutions at 25°C Redox Potentials for Some Biological Half Reactions... 

Nonaqueous enzymatic redox reactions have been limitedby stability owing to solvents and highly reactive substrates (H202). Here we have shown evidence of methods to alleviate these concerns for reactions with CPO. In experimental systems, the in situ production of H202 by GOx was shown to function equally well and more reproducibly than added H202. In situ production is experimentally easier and prevents enzyme deactivation owing to high peroxide levels. GOx was more solvent stable than CPO therefore, the GOx system may be useful for this and other redox systems. 

Noble metal electrodes include metals whose redox couple M/Mz+ is not involved in direct electrochemical reactions in all nonaqueous systems of interest. Typical examples that are the most important practically are gold and platinum. It should be emphasized, however, that there are some electrochemical reactions which are specific to these metals, such as underpotential deposition of lithium (which depends on the host metal) [45], Metal oxide/hydroxide formation can occur, but, in any event, these are surface reactions on a small scale (submonolayer -> a few monolayers at the most [6]). 

Redox-Mediated Metal Deposition. A reduced polyimide surface can function as a reducing substrate for subsequent deposition of metal ions from solution. For metal reduction to occur at a polymer surface, the electron transfer reaction must be kinetically uninhibited and thermodynamically favored, i.e., the reduction potential of the dissolved metal complex must be more positive than the oxidation potential of the reduced film. Redox-mediated metal deposition results in oxidation of the polymer film back to the original neutral state. The reduction and oxidation peak potential values for different metal complexes and metal deposits in nonaqueous solvents as measured by cyclic voltammetry are listed in Table III. 

---