Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Recording Parameters

Another type of ordinate scale variation is absorbance presentation. For this purpose the normal transmittance drive shaft is coupled to a set of logarithmic gears or a logarithmic potentiometer which translates the information directly to an absorbance scale. [Pg.53]


Fig. 5. Basic recording parameters for a medium bit cell and head (7). Fig. 5. Basic recording parameters for a medium bit cell and head (7).
Fig. 5. Standard fast spin-echo imaging of the pelvis and the lower leg. Typical contrasts between musculature and other tissues are demonstrated. Bl = bladder, Fe = femur. Gluteus = gluteus muscle. Original recording parameters matrix 192 x 256, slice thickness 6 mm, a-c field of view (fov) = 380 mm, d-f fov = 180 mm. (a) and (d) Proton density weighting TR = 5000 ms, TE = 12 ms. (b) and (e) Ti-weighting TR = 500 ms, TE = 12 ms. (c) and (f) 7 2-weighting TR = 5000 ms, TE = 100 ms. Fig. 5. Standard fast spin-echo imaging of the pelvis and the lower leg. Typical contrasts between musculature and other tissues are demonstrated. Bl = bladder, Fe = femur. Gluteus = gluteus muscle. Original recording parameters matrix 192 x 256, slice thickness 6 mm, a-c field of view (fov) = 380 mm, d-f fov = 180 mm. (a) and (d) Proton density weighting TR = 5000 ms, TE = 12 ms. (b) and (e) Ti-weighting TR = 500 ms, TE = 12 ms. (c) and (f) 7 2-weighting TR = 5000 ms, TE = 100 ms.
The following parameters are derived from the recorded parameters as percentages ... [Pg.130]

The heme optical density of a hemoprotein and the fluorescence intensity of the unique Trp residue of the protein are recorded at hydrostatic pressures between 0 and 4 kbar. The two recorded parameters increase with hydrostatic pressure. Explain in five to seven lines. [Pg.234]

Table 5.4.2. Selected recording parameters for routine nC NMR spectra of lignins... Table 5.4.2. Selected recording parameters for routine nC NMR spectra of lignins...
The manufacturing parameters are kept constant by automatic remote control. Among recorded parameters is the Redox value of the spent acid fully described in Chapter XI. In case of any irregularity the plant is automatically stopped and an alarm given in the control room. [Pg.92]

Recently demonstrated possibilities of recording mass spectrometric data on magnetic tape offer the intriguing prospect of recreating the course of an experiment in its entirety at will. This allows an evaluation of the collected information by studying the relationship of a particular event with any combination of recorded parameters. [Pg.24]

HPLC Sample Preparation HPLC Sample Introduction Sample in the Column Sample at the Detector Sample on the Chart Recorder Parameters, Parameters... [Pg.2]

XRD analysis was performed on a Siemens D500 powder diffractometer using CuKa radiation (X(CuKal) = 0.15406 nm). Standard diffractograms recording parameters were dwell time = 1 s, step = 0.05°, 20 range = 10 to 90°, divergence slit = 1° for precise cell parameter determination dwell time = 10 s, step = 0.02°. [Pg.602]

Each analytical result obviously must apply to the sample for which it is reported. Any mix-up must be avoided. The Chain of Custody system was developed to ensure that the reported result applies to the sample collected at the recorded time and location, and not to another sample inserted by mistake or to deceive. The recorded parameters are available for comparison with those specified in the monitoring protocol. Meticulousness in adhering to protocol is crucial for samples analyzed for legal or regulatory purposes. The format of the Chain of Custody form must match the QAP for all samples. [Pg.225]

Fig. 15.6 Effects of treatment group (Control, Non-fighting cues, and Fighting cues) on the exploratory behavior of isolated Pagurus bernhardus. The recorded parameters were percent time of (a) withdrawn into shell, (b) stationary, (c) locomotion, (d) digging in the substrate, and (e) shell-raising (sample size in brackets). The total time taken to recover from a startle response induced at the end of the observation period is reported in (f). The figure gives the raw data with the standard errors bars and P-values from post-hoc Fisher s PLSD. Modified after Briffa and Williams (2006)... Fig. 15.6 Effects of treatment group (Control, Non-fighting cues, and Fighting cues) on the exploratory behavior of isolated Pagurus bernhardus. The recorded parameters were percent time of (a) withdrawn into shell, (b) stationary, (c) locomotion, (d) digging in the substrate, and (e) shell-raising (sample size in brackets). The total time taken to recover from a startle response induced at the end of the observation period is reported in (f). The figure gives the raw data with the standard errors bars and P-values from post-hoc Fisher s PLSD. Modified after Briffa and Williams (2006)...
Figure 4.156 illustrates the detailed technical drawing of a dynamic mechanical analyzer by TA Instraments. The sample is enclosed in a variable, constant-temperature environment, not shown, so that the recorded parameters are stress, strain, time, frequency, and temperature. This instrument can be used for resonant and defined-frequency operation. Even creep and stress relaxation measurements can be performed. In creep experiments, a constant stress is applied at time zero and the... [Pg.414]

The composite figures of pressure, mass, internal fluid, and external shell temperatures indicate no unusual characteristics in the recorded parameters such as were noted previously in the 20% fill trial. However, a detailed frame-by-frame analysis of the video record clearly shows that the fast fracture phase of vessel failure was preceded, at about 1 to 2 seconds (approximately 25 to 50 video frames), with the formation of a crack that permitted a vapor and then two-phase discharge to occur through the rupture. [Pg.477]

This table records parameters of the Tait equation (Refs. 1,2) that gives the ratio between the density at pressure P, piTJ ), relative to the density at a reference pressure, at the same... [Pg.1249]

Electrokinetic experiments were run for 24 hours, a 25 mA cm-2 electrical current density was imposed with an electrophoresis power supply FR500-125 BIOELEC. Electrode arrangement considered keeping constant a bare RVC cathode, and switching the anode from bare RVC to RVC-Ti02, recorded parameters correspond to pH and electric conductivity measured with a Multipurpose Lab Interphase Vernier Software electroosmotic flow was registered with an illuminated multitester MUL-270 Steren. [Pg.222]


See other pages where Recording Parameters is mentioned: [Pg.172]    [Pg.266]    [Pg.284]    [Pg.141]    [Pg.834]    [Pg.18]    [Pg.21]    [Pg.172]    [Pg.15]    [Pg.30]    [Pg.122]    [Pg.2]    [Pg.158]    [Pg.135]    [Pg.265]    [Pg.417]    [Pg.93]    [Pg.34]    [Pg.4041]    [Pg.87]    [Pg.449]    [Pg.51]    [Pg.52]    [Pg.52]    [Pg.316]    [Pg.465]    [Pg.431]    [Pg.109]   


SEARCH



© 2024 chempedia.info