Reaction with malonic acid chlorides

One preparative procedure for achieving this reaction involves the acylation of the magnesium enolate of diethyl malonate with an acid chloride in benzene solution (cf. Expt 5.96), and the resulting aclymalonic ester is then heated to 200 °C with an arylsulphonic acid to effect the decarbethoxylation step. An illustrative example is the preparation of ethyl 3-oxopentanoate (ethyl propionyl-acetate, Expt 5.177). 

Compound 85 was dehydrogenated at 300° over palladium black under reduced pressure to a pyridine derivative 96 which was independently synthesized by the following route. Anisaldehyde (86) was treated with iodine monochloride in acetic acid to give the 3-iodo derivative 87. The Ullmann reaction of 87 in the presence of copper bronze afforded biphenyldialdehyde (88). The Knoevenagel condensation with malonic acid yielded the unsaturated diacid 91. The methyl ester (92) was also prepared alternatively by a condensation of 3-iodoanisaldehyde with malonic acid to give the iodo-cinnamic acid (89), followed by the Ullmann reaction of its methyl ester (90). The cinnamic diester was catalytically hydrogenated and reduced with lithium aluminium hydride to the diol 94. Reaction with phosphoryl chloride afforded an amorphous dichloro derivative (95) which was condensed with 2,6-lutidine in liquid ammonia in the presence of potassium amide to yield pyridine the derivative 96 in 27% yield (53). 

Acylation of malonic esters. Monoacylation of sodiomalonic esters is usually accompanied by diacylation. This disadvantage can be eliminated by reaction of the sodiomalonate with trimethylchlorosilane to give a ketene acetal (1). This reacts readily with an acid chloride or anhydride to give an acylmalonic ester (2).11 Yields are in the range 50-80%. 

Condensation of thiophene-3-carbaldehyde 38 with malonic acid (Doebner reaction) in a mixture of pyridine (Py) and piperidine (Hp) with heating affords ( )-3-(3-thienyl)acrylic add (42), whose treatment with thionyl chloride in Py produces 3-chlorothieno[2,3-6]thiophene-2-carboxylic add chloride (43) (72ACS2982,... 

CH OfiSj, H2C(S03H)2- a colourless, crystalline solid which readily absorbs water vapour decomposes on distillation. The potassium salt is prepared by heating methylene chloride with an aqueous solution of potassium sulphite under pressure at 150-I60" C. The free acid is obtained by decomposing the sparingly soluble barium salt with sulphuric acid. The aryl esters are very stable, but the alkyl esters decompose on heating to give ethers. Resembles malonic acid in some of its reactions. 

Methyl- and 3-phenyl-4-hydroxy-2-oxo-2//-pyrido[2,1 -Z)]oxazinium inner salts were prepared in the reaction of 2-pyridone and 2-substituted malonyl chloride, prepared in situ from 2-substituted malonic acid with PCI5 in CH2CI2 (00JCS(P2)2096). 

Syntheses of 4-substituted isoxazoles from -diketones and hydrox-amic acid chlorides were reported earlier. A recent investigation has realt with the behavior in this reaction of malonic ester. ... 

Barbituric acid can be considered as a cyclized malonic acid diamide (malonyl-urea). It is therefore a cyclic diketone that may be classified, in the sense of the compounds discussed in Section 12.6, as a coupling component with a methylene group activated by two carbonyl groups in the a- and a -positions. The reaction with arenediazonium salts was studied by Nesynov and Besprozvannaya (1971). These authors obtained coupling products (in good yield) that they considered to be arylhydrazones. Coupling with 4-(phenylazo)benzenediazonium chloride was studied by Chandra and Thosh (1991). The lH NMR spectra of these compounds are consistent with the arylhydrazone structure 12.68. 

The synthesis of the corresponding naphthyridone scaffold was carried out according to the methods reported by Chu et al. [12] and Sanchez et al. [13]. Namely, the hydrolysis of ethyl 2,6-dichloro-5-fluoronicotinate (3) [14] followed by reaction with thionyl chloride results in the formation of 2,6-dichloro-5-fluoronicotinyl chloride (4). Treatment of this compound with monoethyl malonate in THF under n-butyllithium followed by acidification and decarboxylation gives rise to ethyl 2,6-dichloro-5-fluoronicotinylacetate (5). Reaction of compound 5 with ethyl orthoformate in acetic acid followed by cyclopropylamine results in the formation of 3-cyclopropylamino-2-(2,6-dichloro-5-fluoronicotinyl)acrylate (6), the cyclization reaction of which under NaH/THF gives rise to the required ethyl l-cyclopropyl-6-fluoro-7-chloro-l,4-dihydro-4-oxo-l,8-naphthyridine-3-carboxylate (7), as shown in Scheme 3. 

The synthesis of the representative compound of this series, 1,4-dihydro-l-ethyl-6-fluoro (or 6-H)-4-oxo-7-(piperazin-l-yl)thieno[2/,3/ 4,5]thieno[3,2-b]pyridine-3-carboxylic acid (81), follows the same procedure as that utilized for compound 76. Namely, the 3-thienylacrylic acid (77) reacts with thionyl chloride to form the thieno Sjthiophene -carboxyl chloride (78). Reaction of this compound with monomethyl malonate and n-butyllithium gives rise to the acetoacetate derivative (79). Transformation of compound 79 to the thieno[2 3f 4,5]thieno[3,2-b]pyhdone-3-carboxy ic acid derivative (80) proceeds in three steps in the same manner as that shown for compound 75 in Scheme 15. Complexation of compound 75 with boron trifluoride etherate, followed by reaction with piperazine and decomplexation, results in the formation of the target compound (81), as shown in Scheme 16. The 6-desfluoro derivative of 81 does not show antibacterial activity in vitro. 

The acid, referred to as tetra acid , is prepared as follows In a Friedel-Crafts reaction, acenaphthene 72 is reacted with malonic dinitrile and aluminum chloride. The resulting condensation product 75 is oxidized with sodium chlorate/hy-drochloric acid to form the dichloroacenaphthindandione 76. Oxidation with sodium hypochlorite solution/sodium permanganate affords naphthalene tetracar-boxylic acid 68, mostly existing as the monoanhydride 68a. The dianhydride, on the other hand, evolves only after drying at approx. 150°C. 

Saalfrank, Hoffmann and co-workers performed a number of reactions with tetra-alkoxyallenes such as 196 (Scheme 8.47) [1, 41, 105, 114—116] and demonstrated that this class of donor-substituted allenes can serve as a 1,3-dianion equivalent of malonic acid. Treatment of 196 with cyclopropyldicarboxylic acid dichloride 197 produces 2,4-dioxo-3,4-dihydro-2H-pyran 198 through release of two molecules of ethyl chloride [115]. Similarily, the reaction of this allene 196 with oxalyl chloride gives 3-chloromalonic acid anhydride derivative 199. This intermediate is a reactive dieno-phile which accepts 2,3-dimethyl-l,3-butadiene in a subsequent [4+2] cycloaddition to afford cycloadduct 200 in good yield [116]. 

Magnesium enolates play an important role in C-acylation reactions. The magnesium enolate of diethyl malonate, for example, can be prepared by reaction with magnesium metal in ethanol. It is soluble in ether and undergoes C-acylation by acid anhydrides and acyl chlorides (entries 1 and 3 in Scheme 2.14). Monoalkyl esters of malonic acid react with Grignard reagents to give a chelated enolate of the malonate monoanion. 

---