Pyrrole addition

UV spectra, 4, 1044 Thieno[3,4-6]pyrroles reduction, 4, 1074 Thieno[3,4-c]pyrroles addition reactions, 4, 1060 dipole moment, 4, 1040 mass spectra, 4, 1045 oxidation, 4, 1063 reduction, 4, 1063... 

Note that because of the use of beta bonds, rather than fixed single and double bonds, there is not inconsistency between the molecule depicted and the common vs. the alternate IUPAC names. The double bonds are NOT localized, as the IUPAC picture implies. To the contrary, 5H-Pyrrole is, because of symmetry just another (non-canonical) name for 2H-Pyrrole. Additionally, one should note that a 3H-Pyrrole can also be formed. This would have as its systemic name NP(CP)4 (1H). 

The method described here is the direct adaptation of the original procedure developed by the late Professor Hans Schmid- As summarized in Scheme 1, the Schmid reaction has been successfully applied to [4 + 3] cycloadditions with cyclopentadiene, spiro[2.4]hepta-4,6-diene, and N-Boc-pyrrole. Additional examples can be found in references 8 and 9. Use of functionalized six-membered oxyallyls and synthetic applications of the [4 + 3] cycloadducts have also been described.8... 

By dissolution of the insulating polymer in an oxidant solution, followed by pyrrole addition. Normally the system is stirred and the final products are obtained as colloidal solutions or polypyrrole-covered particles. 

A similar analysis serves to locate the more favorable position for substitution on pyrrole. Addition at either carbon 2 or 3 (Fig. 14.59) allows the nitrogen to help bear the positive charge. However, in the intermediate produced by substitution at carbon 2, two ring carbons share the charge with the nitrogen, whereas substitution at carbon 3 leads to an intermediate in which only one carbon shares the charge with... 

ESR study of the mechanism of pyrrole addition to acyl- and cyanophenylacet-ylenes in the superbase system KOH/DMSO evidences the formation of radicals [502]. One of the signals has been assigned to N-adducts of pyrrolyl radicals with... 

The synthesis will therefore normally produce a 2,4-substituted pyrrole, with in addition an ester group or an acyl group at the 3-position, if a keto ster or a diketone respectively has been employed, and an ester group or an alkyl (aryl) group at the 5-position, according to the nature of the amino-ketone. 

Hydroxy-THISs react with electron-deficient alkynes to give nonisol-able adducts that extrude carbonyl sulfide, affording pyrroles (23). Compound 16 (X = 0) seems particularly reactive (Scheme 16) (25). The cycloaddition to benzyne yields isoindoles in low- yield. Further cyclo-addition between isoindole and benzyne leads to an iminoanthracene as the main product (Scheme 17). The cycloadducts derived from electron-deficient alkenes are stable (23, 25) unless highly strained. Thus the two adducts, 18a (R = H, R = COOMe) and 18b (R = COOMe, R = H), formed from 7, both extrude furan and COS under the reaction conditions producing the pyrroles (19. R = H or COOMe) (Scheme 18). Similarly, the cycloadduct formed between 16 (X = 0) and dimethylfumarate... 

Silver fluorocomplexes are also used ia the separation of olefin—paraffin mixtures (33), nitration (qv) of aromatic compounds (34), ia the synthesis of (9-bridged bicycHcs (35), pyrroles (36), cyclo-addition of vinylbromides to olefins (37), and ia the generation of thioben2oyl cations (38). 

Endo adducts are usually favored by iateractions between the double bonds of the diene and the carbonyl groups of the dienophile. As was mentioned ia the section on alkylation, the reaction of pyrrole compounds and maleic anhydride results ia a substitution at the 2-position of the pyrrole ring (34,44). Thiophene [110-02-1] forms a cycloaddition adduct with maleic anhydride but only under severe pressures and around 100°C (45). Addition of electron-withdrawiag substituents about the double bond of maleic anhydride increases rates of cycloaddition. Both a-(carbomethoxy)maleic anhydride [69327-00-0] and a-(phenylsulfonyl) maleic anhydride [120789-76-6] react with 1,3-dienes, styrenes, and vinyl ethers much faster than tetracyanoethylene [670-54-2] (46). 

Metal-Induced Cycloadditions. The effect of coordination on the metal-iaduced cyclo additions of maleic anhydride and the isostmctural heterocycles furan, pyrrole, and thiophene has been investigated (47). Each heterocycle is bound to an Os(II) center in the complex... 

Analytical and Test Methods. In addition to the modem spectroscopic methods of detection and identification of pyrroles, there are several chemical tests. The classical Runge test with HCl yields pyrrole red, an amorphous polymer mixture. In addition, all pyrroles with a free a- or P-position or with groups, eg, ester, that can be converted to such pyrroles under acid conditions undergo the Ehrlich reaction with p-(dimethylamino)henzaldehyde to give purple products. 

The light-induced rearrangement of 2-phenyl- to 3-phenyl-thiophene may occur by a similar mechanism an equilibrium between the bicyclic intermediate (26) and the cyclopro-penylthioaldehyde (27) has been suggested (Scheme 2). The formation of IV-substituted pyrroles on irradiation of either furans or thiophenes in the presence of a primary amine supports this suggestion (Scheme 3). Irradiation of 2-phenylselenophene yields, in addition to 3-phenylselenophene, the enyne PhC=C—CH=CH2 and selenium. Photolysis of 2-phenyltellurophene furnishes solely the enyne and tellurium (76JOM(108)183). 

The high reactivity of pyrroles to electrophiles is similar to that of arylamines and is a reflection of the mesomeric release of electrons from nitrogen to ring carbons. Reactions with electrophilic reagents may result in addition rather than substitution. Thus furan reacts with acetyl nitrate to give a 2,5-adduct (33) and in a similar fashion an adduct (34) is obtained from the reaction of ethyl vinyl ether with hydrogen bromide. 

Pyrrole has been condensed under alkaline conditions with formaldehyde to give products of either N- or C-hydroxymethylation (Scheme 22). Although acid-catalyzed hydroxy-methylation is not a practical possibility, by addition of a reducing agent to the reaction mixture overall reductive alkylation can be achieved (Scheme 23). 

Pyrrole, furan or thiophene do not react with nucleophilic reagents by substitution or addition but only by proton transfer. However, it should be noted that protonated pyrroles are susceptible to nucleophilic attack (see Section 3.02.2.4.5). 

Furan and thiophene undergo addition reactions with carbenes. Thus cyclopropane derivatives are obtained from these heterocycles on copper(I) bromide-catalyzed reaction with diazomethane and light-promoted reaction with diazoacetic acid ester (Scheme 41). The copper-catalyzed reaction of pyrrole with diazoacetic acid ester, however, gives a 2-substituted product (Scheme 42). 

Furan undergoes 1,4-addition with ethoxycarbonyinitrene to give, after rearrangement, the pyrrolinone (121). The corresponding reaction with pyrrole gives a mixture of (122) and (123) (64TL2185). 

The reactions of pyrroles with dienophiles generally follow two different pathways involving either a [4 + 2] cycloaddition or a Michael-type addition to a free a-position of the pyrrole ring. Pyrrole itself gives a complex mixture of products with maleic anhydride or maleic acid and with benzyne reacts to give 2-phenylpyrrole rather than a product of cycloaddition (Scheme 47). 

A -Amino- and A-substituted amino-pyrroles readily undergo Diels-Alder additions and add to activated alkynes at room temperature. The resulting azanorbornadienes extrude A-aminonitrenes and this forms the basis of an unusual synthesis of benzene derivatives (81S753,81TL3347). It has been found that ethyl/3-phenylsulfonylpropiolate (135) is a superior dienophile to DMAD (Scheme 50). 

A-Substituted pyrroles, furans and dialkylthiophenes undergo photosensitized [2 + 2] cycloaddition reactions with carbonyl compounds to give oxetanes. This is illustrated by the addition of furan and benzophenone to give the oxetane (138). The photochemical reaction of pyrroles with aliphatic aldehydes and ketones results in the regiospecific formation of 3-(l-hydroxyalkyl)pyrroles (e.g. 139). The intermediate oxetane undergoes rearrangement under the reaction conditions (79JOC2949). 

There are reports of an increasing number of palladium-assisted reactions, in some of which the palladium has a catalytic function. Thus furan and thiophene undergo facile palladium-assisted alkenylation giving 2-substituted products. Benzo[6 Jfuran and TV- acetyl-indole yield cyclization products, dibenzofurans and carbazoles respectively, in addition to alkenylated products (8UOC851). The arylation of pyrroles can be effected by treatment with palladium acetate and an arene (Scheme 86) (81CC254). 

---