Pyridines transition metal complexes

A unique method to generate the pyridine ring employed a transition metal-mediated 6-endo-dig cyclization of A-propargylamine derivative 120. The reaction proceeds in 5-12 h with yields of 22-74%. Gold (HI) salts are required to catalyze the reaction, but copper salts are sufficient with reactive ketones. A proposed reaction mechanism involves activation of the alkyne by transition metal complexation. This lowers the activation energy for the enamine addition to the alkyne that generates 121. The transition metal also behaves as a Lewis acid and facilitates formation of 120 from 118 and 119. Subsequent aromatization of 121 affords pyridine 122. 

Pyridine 1-oxide, like pyridine, can act as a ligand in transition metal complexes, but unfortunately good stability constants are not known. However, Shupack and Orchin have found that the C===C stretching frequency of the ethylene ligand in trans-ethylene pyridine 1-oxide dichloroplatinum(II) varies linearly with the pA and hence with the C7-value (ct+ or a, respectively) of substituents in the pyridine oxide. The data for the above reaction series are included in Table V. 

Transition metal complex-mediated hydroacylation of pyridine derivatives with aldehydes 99SL1. 

Cycloaddition reactions catalysed by transition metal complexes are an important tool in the construction of a wide range of carbo- and hetero-cyclic systems, such as benzene, pyridines, triazoles, etc. [7]. In general, these reactions are extremely atom-efficient and involve the formation of several C-C bonds in a single step. Among the innumerable possible catalytic systems for the cycloaddition reaction the NHC-metal complexes have received special attention [7c]. 

A variety of transition metal complexes including organometallics was subjected to an ac electrolysis in a simple undivided electrochemical cell, containing only two current-carrying platinum electrodes. The compounds (A) are reduced and oxidized at the same electrode. If the excitation energy of these compounds is smaller than the potential difference of the reduced (A ) and oxidized (A ) forms, back electron transfer may regenerate the complexes in an electronically excited state (A+ + A A + A). Under favorable conditions an electrochemiluminescence (eel) is then observed (A A + hv). A weak eel appeared upon electrolysis o t]jie following complexes Ir(III)-(2-phenylpyridine-C, N ) [Cu(I)(pyridine)i],... 

Transition metal complexes have been used in a number of reactions leading to the direct synthesis of pyridine derivatives from acyclic compounds and from other heterocycles. It is pertinent also to describe two methods that have been employed to prepare difficultly accessible 3-alkyl-, 3-formyl-, and 3-acylpyridines. By elaborating on reported194,195 procedures used in aromatic reactions, it is possible to convert 3-bromopyridines to products containing a 3-oxoalkyl function196 (Scheme 129). A minor problem in this simple catalytic process is caused by the formation in some cases of 2-substituted pyridines but this is minimized by using dimethyl-formamide as the solvent.196... 

In this chapter, we will focus on paramagnetic materials based on two pyridine substituted TTFs (Fig. 5) the TTF CH=CH py [59] and its trimethyl derivative Me/ITF CH=CH pv [51]. Owing to the presence of one pyridine group on each TTF, such ligands coordinate to one transition metal ion. Therefore, a large variety of transition metal complexes can, in principle, adapt pyridine substituted TTFs in... 

T. Yamamoto, T. Murauyama, Z.-H. Zhou, T. Ito, T. Fukuda, Y. Yoneda, F. Begum, T. Ikeda, S. Sasaki, H. Takezoe, A. Fukuda, and K. Kubota, -ir-Conjugated poly(pyridine-2,5-diyl), poly(2,2 -bipyridine-5,5 -diyl), and their alkyl derivatives. Preparation, linear structure, function as a ligand to form their transition metal complexes, catalytic reactions, //-type electrically conducting properties, optical properties, and alignment on substrates, J. Am. Chem. Soc., 116 4832-4845,... 

Effectively, this is another example of the addition of a functional aromatic compound to an alkene, as the Murai reaction, but the mechanism is different. Alkyl substituted pyridine derivatives are interesting molecules for pharmaceutical applications. The a-bond metathesis reaction is typical of early transition metal complexes as we have learnt in Chapter 2. 

Many of these systems employ charged polymers or polyelectrolytes that confer on them particular properties due to the existence of electrical charges in the polymer structure. Oyama and Anson [14,15] introduced polyelectrolytes at electrode surfaces by using poly(vinylpiridine), PVP, and poly-(acrylonitrile) to coordinate metal complexes via the pyridines or nitrile groups pending from the polymer backbone. Thomas Meyer s group at North Carolina [16, 17[ also employed poly(vinylpyridine) to coordinate Ru, Os, Re and other transition-metal complexes by generating an open coordination site on the precursor-metal complex. 

The coordination shell comprises three fac-S and three fac-N-donor atoms in [Fe(6mp)3] [FeClJCl, where 6mp = 6-thiopurine, (189). Both iron(II) and iron(III) complexes are included in a review of transition metal complexes of thiosemicarbazones. " 5,5 -Dimethyl-l,2,3-cyclohex-anetrione-l,2-dioxime-3-thiosemi-carbazone, dcdt (190), acts as an A, A, 5 -donor to Fe +, giving a bis-ligand complex (contrast [Fe(7V,7V -dcdt)3] with Fe " "). The Schiff bases from pyridine 2-carboxaldehyde and thiosemicarbazide or 4-phenyl thiosemicarbazide also act as A, VV, 5 -donors, both to Fe " " and to Fe " ". The antibacterial activity of these complexes was assessed, in... 

Pyridine-based ligands which have been used for dendrimers are 2,2-bipyridine (bpy) 17,2,3-bis(2-pyridyl)pyrazine (2,3-dpp) 18 and its monomethylated salt 19, and 2,2 6, 2"-terpyridine 20. Their transition metal complexes possessing dendritic structures were first reported in the collaborative work of Denti, Campagne, and Balzani whose divergent synthetic strategy has led to systems containing 22 ruthenium centers. - The core unit is [Ru(2,3-dpp)3] 21 which contains three... 

The free electron pair(s) in the concave pyridines 3 (Table 1), 13 (s. Scheme 3) and 29 (s. Scheme 5) and especially in the concave 1,10-phenanthrolines 11 (s. Scheme 2) and 21 (Structures 3) are not only able to bind a proton, they may also be used to coordinate a metal ion. For concave 1,10-phenanthrolines 11 and 21, transition metal complexes 87 (Structure 11) have already been generated [18, 55]. They form readily in acetonitrile solution with binding constants of 10 10 and larger. Of great importance is the nature of the chains X in the concave 1,10-phenanthrolines 21 (Structures 3). Pure aliphatic chains lead to smaller association constants than polyether chains. 

Acetylacetone usually forms transition metal complexes by coordination through bidentate oxygens. Since platinum forms unusually strong bonds to carbon, acetylacetonato complexes of platinum(II) are frequently C-bonded. When Pt(acac)2 is treated with 1 mole of pyridine, a bidentate oxygen-bonded acetylacetonate ligand is converted to a y-carbon-bonded ligand. 

Pyridines are also well known as ligands in transition metal complexes, and if the equilibrium constants for the formation of such complexes can be related to base strength, it is expected that such constants would follow the Hammett equation. The problem has been reviewed,140 and a parameter S, formulated which is a measure of the contribution of the additional stabilization produced by bond formation to the stabilization constants of complexes expressed in terms of a.141 The Hammett equation has also been applied to pyridine 1 1 complexation with Zn(II), Cd(II), and Hg(II) a,/3,y,<5-tetraphenylporphins,142 143 the a values being taken as measures of cation polarizing ability. Variation of the enthalpy of complexation for adducts of bis(2,4-pentanediono)-Cu(II) with pyridines plotted against a, however, exhibited a curved relationship.144... 

Ammonium dithiocarbamates can be prepared through reaction (11). With HC1 or H2S04 at lower temperatures the free acids are formed. Only one transition metal complex (37) is known, with a pseudo-octahedral coordination of Ni four sulfur atoms of the dithiocarbamate in the equatorial plane and two pyridine solvent molecules at the apical positions. Sulfides can be eliminated from monosubstituted dithiocarbamates to give isothiocyanates.53... 

The separation of transition-metal complexes of pyridine-2-carbaldehyde 2-quinolylhydrazone (PAQH) has been accomplished by TLC [63]. The method consists of separation of the metals as their PAQH chelates and quantitation in situ by reflectance spectroscopy. 

Low-valence transition metal complexes of a-diimine ligands are highly colored because of the presence of low-energy metal to a-diimine charge transfer (MLCT) transitions. For a series of d6-M(CO)., (a-diimine) (M=Cr,Mo,W) and d8- M (CO)3 (a-diimine) (M =Fe, Ru) complexes, we have studied the spectroscopic and photochemical properties (1-10). The a-diimine ligands used are 1,4-diaza-1,3-butadiene (R-DAB), pyridine-2-car-baldehyde-imine (PyCa), 2,2 -bipyridine (bipy) or 1,10-phenanthroline (phen) molecules. A close relationship was deduced between the photochemical behavior of these complexes and their resonance Raman (rR) spectra, obtained by excitation into the low-energy MLCT band. 

---