Pulping processes mechanical, general

Pulping of hgnocellulosic materials results in fibres termed pulps. Pulping of wood can generally be divided into mechanical and chemical pulping or mixtures of both types. In chemical pulping, nowadays the alkaline Kraft sulphate pulp process is predominant compared to the sulphite process. 

Fibers for fiberboard are coarser and less refined chemically than those used for paper. Processes are used that bring about fiber separation with a minimum loss of chemical components and a maximum yield. The pulping processes used are generally the following mechanical, thermomechanical. 

Mechanism of Anthraquinone Acceleration. The mechanism for the dual function of AQ has been the subject of much research (29). Anthraquinone is an effective pulping accelerator in very small quantities and functions as a catalyst in the process. It is generally accepted that AQ functions in a complex redox sequence. 

Continuous clarifiers generally are employed with dilute suspensions, principally industrial process streams and domestic municipal wastes, and their primary purpose is to produce a relatively clear overflow. They are basically identical to thickeners in design and layout except that they employ a mechanism of hghter construction and a drive head with a lower torque capability. These differences are permitted in clarification applications because the thickened pulp produced is smaller in volume and appreciably lower in suspended solids concentration, owing in part to the large percentage of relatively fine (smaller than 10 Im) solids. The installed cost of a clarifier, therefore, is approximately 5 to 10 percent less than that of a thickener of equal tank size, as given in Fig. 18-94. 

Chemical modification reactions continue to play a dominant role in improving the overall utilization of lignocellulosic materials [1,2]. The nature of modification may vary from mild pretreatment of wood with alkali or sulfite as used in the production of mechanical pulp fibers [3] to a variety of etherification, esterification, or copolymerization processes applied in the preparation of wood- [4], cellulose- [5] or lignin- [6] based materials. Since the modification of wood polymers is generally conducted in a heterogeneous system, the apparent reactivity would be influenced by both the chemical and the physical nature of the substrate as well as of the reactant molecules involved. 

---