Propanediol protection

Propanediol Protection of carbohydrate diol groups as cyclic boronates... 

In the piepaiation of ioveisol (12) (41), the key intermediate (23) is prepared from the diacid (20) by the action of thionyl chloride followed by 3-amino-l,2-propanediol. The alcohol groups of (23) are protected as the acetates (25), which is then N-acylated with acetoxyacetyl chloride and deprotected in aqueous methanol with sodium hydroxide to yield (26). N-alkylation of (26) produces ioversol (12). 

In the first example, selective protection was more successful with 1,3-propanediol than with ethylene glycol. ... 

Axenrod and co-workers reported a synthesis of TNAZ (18) starting from 3-amino-l,2-propanediol (28). Treatment of (28) with two equivalents of p-toluenesulfonyl chloride in the presence of pyridine yields the ditosylate (29), which on further protection as a TBS derivative, followed by treatment with lithium hydride in THF, induces ring closure to the azetidine (31) in excellent yield. Removal of the TBS protecting group from (31) with acetic acid at elevated temperature is followed by oxidation of the alcohol (32) to the ketone (33). Treatment of the ketone (33) with hydroxylamine hydrochloride in aqueous sodium acetate yields the oxime (34). The synthesis of TNAZ (18) is completed on treatment of the oxime (34) with pure nitric acid in methylene chloride, a reaction leading to oxidation-nitration of the oxime group to em-dinitro functionality and nitrolysis of the A-tosyl bond. This synthesis provides TNAZ in yields of 17-21 % over the seven steps. 

Propanediol is first protected at one end as a TBS ether The free alcohol function is then subjected to a Swern oxidation, leading to aldehyde 22. 

Aldehydes and ketones are usually protected by converting them to acetals by reaction with an alcohol in the presence of acid (see Section 18.9). Although many different alcohols could be used, ethylene glycol (1,2-ethanediol) or 1,3-propanediol is most often... 

In contrast to aqueous methods, the polyol approach resulted in the synthesis of metallic nanoparticles protected by surface-adsorbed glycol, thus minimizing the oxidation problem The use of polyol solvent also reduces the hydrolysis problem of ultrafine metal particles, which often occurs in aqueous systems. Oxide nanoparticles can be prepared, however, with the addition of water, which makes the polyol method act more like a sol—gel reaction (forced hydrolysis). For example, 5.5-nm CoFe204 has been prepared by the reaction of ferric chloride and cobalt acetate in 1,2- propanediol with the addition of water and sodium acetate. 

Fig. 5 Hydrosilylation without protective groups example of l-allyloxy-2-3-propanediol...

Prochiral Compounds. The enantiodifferentiation of prochi-ral compounds by lipase-catalyzed hydrolysis and transesterification reactions is fairly common, with prochiral 1,3-diols most frequently employed as substrates. Recent reports of asymmetric hydrolysis include diesters of 2-substituted 1,3-propanediols and 2-0-protected glycerol derivatives. The asymmetric transesterification of prochiral diols such as 2-0-benzylglycerol and various other 2-substituted 1,3-propanediol derivatives is also fairly common, most frequently with Vinyl Acetate as an irreversible acyl transfer agent. 

Conversely, the same catalyst (2) can be used for the protection of hydroxy benzal-dehydes, substrates that usually need protection of the phenol function prior to acetal formation. Azeotropic distillation in benzene give good yields of the acetal product with both 1,2-ethanediol and 1,3-propanediol (Scheme 10.3) [4]. 

F-FMISO is synthesized in one-step reaction between the protected precursor, l-(2/-nitro-l,-imidazolyl)-2-0-tetrahydropyranyl-3-0-toluenesulfonyl-propanediol (NITTP) and 18F-containing Kryptofix 2.2.2 in acetonitrile solution (Kamarainen et al, 2004). The labeled product is hydrolyzed with acid to give 18F-FMISO, which is further purified by column chromatography using a Sep-Pak cartridge. From an automated synthesis, the radiochemical yield is 34% at EOB after a synthesis time of 50 min. HPLC shows a radiochemical purity of 97%. The molecular structure of 18F-FMISO is shown in Fig. 8.2f. 

Optically active 2-substituted- 1,3-propanediol derivatives were prepared as shown in equation 45. The bis-trimethylsilylated 1,3-diols were condensed with /-menthone in the presence of trimethylsilyl triflate to give the corresponding diastereomeric ketals, which were separated and subjected to further transformations. For example, the cleavage was carried out via a Mukaiyama reaction to generate the a-alkoxy ketone, which could be protected and then cleaved to the optically active, unsymmetrical, monoprotected 1,3-diol52. 

---