Processing/fabrication techniques transfer molding

Aside from PTFE and PCTFE, copolymers of TFE and a few other fluorocarbon polyuners are processed by melt-processing methods. Commercial fluoropolymers that have found application in chemical processing industries include PFA, FEP, ETFE, ECTFE, and PVDF. These plastics are fabricated into parts by common techniques such as injection molding, transfer molding, blow molding, compression molding, rotational molding, and extrusion (Table... 

A diagram of the injection molding process is shown in Figure 6.22. The extruder is similar to other fabrication techniques where the granular resin enters a hopper, where the material is transferred to a heated barrel and a reciprocating screw moves the molten plastic to the molding cavity. The molding cavity is unique to this process. The molten polyethylene is forced xmder pressure into a closed mold that is continually cooled. After the molded part cools, the mold opens and the fabricated part is ejected from the mold. An injection molded article can usually be identified by the ejector pin marks that are usually present on the molded part. 

---