Process temperature, spray fluidized

Processes for Paraffin Nitrations. Propane is thought to be the only paraffin that is commercially nitrated by vapor-phase processes. Temperature control is a primary factor in designing the reactor, and several approaches have been investigated. A spray mtrator in which liquid nunc acid is spiayed into hoi propane is used industiially. Relatively small-diameter tubular reactors, fluidized-bed reactors, and molten salt reactors have all been successfully used in laboratory units. 

The previous discussion pointed out that various material properties have a more or less strong influence on particle formulation in spray fluidized beds. Process conditions, such as the spraying rate, gas temperature, or the mass flow rate of the fluidization gas, can also very significantly affect the properties of the resulting particles. This aspect will be illustrated in the present section by means of selected examples. 

Catalytic methanation processes include (/) fixed or fluidized catalyst-bed reactors where temperature rise is controlled by heat exchange or by direct cooling using product gas recycle (2) through wall-cooled reactor where temperature is controlled by heat removal through the walls of catalyst-filled tubes (J) tube-wall reactors where a nickel—aluminum alloy is flame-sprayed and treated to form a Raney-nickel catalyst bonded to the reactor tube heat-exchange surface and (4) slurry or Hquid-phase (oil) methanation. 

Fluid coking (Fig. 4) is a continuous process that uses the fluidized soflds technique to convert atmospheric and vacuum residua to more valuable products (12,13). The residuum is converted to coke and overhead products by being sprayed into a fluidized bed of hot, fine coke particles, which permits the coking reactions to be conducted at higher temperatures and shorter contact times than they can be in delayed coking. Moreover, these conditions result in decreased yields of coke greater quantities of more valuable Hquid product are recovered in the fluid coking process. 

In the fluid coking process, part of the coke produced is used to provide the process heat. Cracking reactions occur inside the heater and the fluidized-bed reactor. The fluid coke is partially formed in the heater. Hot coke slurry from the heater is recycled to the fluid reactor to provide the heat required for the cracking reactions. Fluid coke is formed by spraying the hot feed on the already-formed coke particles. Reactor temperature is about 520°C, and the conversion into coke is immediate, with... 

One of the advanced concepts for capturing CO2 is an absorption process that utilizes dry regenerable sorbents. Pure sodium bicarbonate from Dongyang Chemical Company and spray-dried sorbents were used to examine the characteristics of CO2 reaction in a flue gas environment. The chemical characteristics were investigated in a fast fluidized reactor of 0.025 m i.d., and the effects of several variables on sorbent activity, including gas velocity (1.5 to 3.5 m/s), temperature (40 to 70 °C), and solid concentration (15 to 25 kg/m /s)], were examined in a fast fluidized-bed. Spray-dried Sorb NX30 showed fast kinetics in the fluidized reactor. 

---