Predefined block

ICso, the concentration (usually molar) of an inhibitor (receptor, enzyme antagonist) that blocks a given predefined stimulus by 50%. It is an empirical value in that its magnitude varies with the strength of the initial stimulus to be blocked. 

Fig. 26. Example of the data reduction process. Each data block of a multi-block sequence (in this case simple FIDs) is reduced to a single value by means of averaging over a predefined data window and plotted against the block s x-value. The resulting relaxation curve is then fitted to estimate its decay rate(s). The algorithm gives a lot of freedom in setting the data window and including/excluding any number of initial or final blocks. Notice that in the PP case shown here, the T-value decreases from left to right. This helps to minimize thermal variations of the magnet.

There are several predefined title blocks from which you can choose. In this section we will show how to choose a different title block. In the next section, we will show how to modify an existing title block to create your own custom title block. We will first look at the available title blocks. We will assume that you still have the project open from the previous example. This is a blank schematic, and we can place title blocks in it without worrying about cluttering up a useful schematic. 

This dialog box lists all of the predefined title blocks and the library in which they reside. If you installed the demo software in the default directory, then the two libraries are ... 

Sequential logic elements, that is, flip-flops and latches, can be inferred by writing statements within an always statement using styles described in Chapter 2. It is best not to synthesize a memory as a two-dimensional array of flip-flops because this is an inefficient way to implement a memory. The best way to create a memory is to instantiate a predefined memory block using a module instantiation statement. 

The shapes look differently according to their affiliation to a document, which makes their distinction easier and, therefore, more user-friendly. At least two collections of predefined shapes have to be loaded for rule modeling one for shapes which shall be part of the integration document and the other for shapes of the application documents. This separation of shape collections makes it easy to use the rule editor for different documents and domains. For example, the provided domain-specific shapes for flowsheet objects, namely devices, streams, and connectors, are represented as boxes, block arrows, and circles, respectively. Further customization to the Comos PT system is realized by loading an image from the Comos PT database when the tjqje of a device shape is set. In the rule depicted in the figure, the devices (boxes) show the representation of heat exchangers in PFD and P ID of Comos PT. 

---